|
IEC/IEEE 60255-118-1
Edition 1.0 2018-12
INTERNATIONAL
STANDARD
colour
inside
Measuring relays and protection equipment –
Part 118-1: Synchrophasor for power systems – Measurements
or
by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing being
secured. Requests for permission to reproduce should be addressed to either IEC at the address below or IEC’s
member National Committee in the country of the requester or from IEEE.
IEC Central Office Institute of Electrical and Electronics Engineers, Inc.
3, rue de Varembé 3 Park Avenue
CH-1211 Geneva 20 New York, NY 10016-5997
Switzerland United States of America
Tel.: +41 22 919 02 11 [email protected]
[email protected] www.ieee.org
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About the IEEE
IEEE is the world’s largest professional association dedicated to advancing technological innovation and excellence for the
benefit of humanity. IEEE and its members inspire a global community through its highly cited publications, conferences,
technology standards, and professional and educational activities.
About IEC/IEEE publications
The technical content of IEC/IEEE publications is kept under constant review by the IEC and IEEE. Please make sure that
you have the latest edition, a corrigendum or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and electrical
bibliographical information on IEC International Standards, terms containing 21 000 terms and definitions in English and
Technical Specifications, Technical Reports and other French, with equivalent terms in 16 additional languages. Also
documents. Available for PC, Mac OS, Android Tablets and known as the International Electrotechnical Vocabulary (IEV)
iPad. online.
IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of IEC
committee,…). It also gives information on projects, replaced publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and also If you wish to give us your feedback on this publication or need
once a month by email. further assistance, please contact the Customer Service
.
IEC/IEEE 60255-118-1
Edition 1.0 2018-12
INTERNATIONAL
STANDARD
colour
inside
Measuring relays and protection equipment –
Part 118-1: Synchrophasor for power systems – Measurements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.120.70 ISBN 978-2-8322-6172-9
– 2 – IEC/IEEE 60255-118-1:2018
© IEC/IEEE 2018
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 10
2 Normative references . 10
3 Terms, definitions, and abbreviated terms . 10
3.1 Terms and definitions . 10
3.2 Abbreviated terms . 11
4 Synchrophasor measurement . 12
4.1 Input and output quantities . 12
4.2 Power system signal . 12
4.3 Measurand definitions . 13
4.3.1 Synchrophasor phase angle. 13
4.3.2 Synchrophasor measurand . 13
4.4 Frequency measurand definition . 13
4.5 Rate of change of frequency measurand definition . 14
4.6 Measurement time synchronization . 14
5 Measurement compliance evaluation . 14
5.1 PMU measurement capability . 14
5.2 Measurement evaluation . 14
5.2.1 Synchrophasor measurement evaluation . 14
5.2.2 Frequency and ROCOF measurement evaluation . 15
5.2.3 Measurement response time and delay time . 15
5.2.4 Overshoot and undershoot . 16
5.2.5 Measurement reporting latency . 18
5.2.6 Measurement and operational errors . 18
5.3 Measurement reporting . 19
5.3.1 General . 19
5.3.2 Reporting rates . 19
5.3.3 Reporting times . 19
5.4 Measurement compliance . 19
5.4.1 Performance classes . 19
5.4.2 Compliance verification . 20
6 Measurement compliance test and evaluation . 20
6.1 Testing considerations . 20
6.2 Reference and test conditions . 21
6.3 Steady-state compliance . 21
6.4 Dynamic compliance – Measurement bandwidth . 24
6.5 Dynamic compliance – Performance during ramp of system frequency . 27
6.6 Dynamic compliance – Performance under step changes in phase and
magnitude . 29
6.7 PMU reporting latency compliance . 30
7 Documentation . 31
Annex A (informative) Time tagging and dynamic response . 32
A.1 Dynamic response . 32
A.2 Time tags . 32
A.3 Magnitude step test example . 34
© IEC/IEEE 2018
A.4 PMU time input . 35
Annex B (informative) Parameter representation and definition application examples . 37
B.1 General . 37
B.2 Representing non-stationary sinusoids . 37
B.3 Introduction of definition application examples . 38
B.3.1 General . 38
B.3.2 Example 1: steady-state at nominal frequency . 38
B.3.3 Example 2: steady-state and constant off-nominal frequency . 38
B.3.4 Example 3: oscillation of the phase and amplitude of the power signal . 39
B.3.5 Example 4: constant, non-zero rate of change of frequency . 40
B.4 Reconstruction of the power system sinusoidal signal from the
synchrophasor . 41
Annex C (informative) PMU evaluation and testing . 42
C.1 General . 42
C.2 TVE measurement evaluation . 42
C.3 Phase-magnitude relation in TVE and timing . 43
C.4 Evaluation of response to stepped input signals . 45
C.5 Harmonic distortion test signal phasing . 47
C.6 ROCOF limits . 47
C.6.1 General . 47
C.6.2 Derivation . 48
C.7 PMU reporting latency. 49
Annex D (informative) Reference signal processing models . 50
D.1 General . 50
D.2 Basic synchrophasor estimation model . 50
D.3 Timestamp compensation for low-pass filter group delay. 51
D.4 Positive sequence, frequency, and ROCOF . 52
D.5 P Class reference model for phasor . 53
D.6 P class filter details . 53
D.7 M class reference model for phasor . 55
D.8 Data rate reduction model . 57
D.9 Trade-offs in the reference model . 58
D.9.1 Immunity to off-nominal components, reporting latency and time
alignment . 58
D.9.2 Response time and the accuracy of synchrophasors, frequency and
ROCOF measurements . 59
Annex E (informative) Synchrophasor measurement using sampled value input to
PMU . 61
E.1 General . 61
E.2 Creation of sampled values . 61
E.3 Sources of synchrophasor error when using sampled values . 62
E.4 Performance . 62
E.4.1 General . 62
E.4.2 Steady-state performance considerations . 62
E.4.3 Dynamic performance considerations . 63
E.4.4 Latency. 63
E.5 Proposed changes to performance requirements . 64
Annex F (informative) Suggested subset of tests for PMU evaluation under
environmental influences .
...