|
SLOVENSKI STANDARD
oSIST prEN 12165:2022
01-oktober-2022
Baker in bakrove zlitine - Palice (lite in iztiskane) za izkovke
Copper and copper alloys - Wrought and unwrought forging stock
Kupfer und Kupferlegierungen - Vormaterial für Schmiedestücke
Cuivre et alliages de cuivre - Barres corroyées et brutes pour matriçage
Ta slovenski standard je istoveten z: prEN 12165
ICS:
77.150.30 Bakreni izdelki Copper products
oSIST prEN 12165:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 12165:2022
oSIST prEN 12165:2022
DRAFT
EUROPEAN STANDARD
prEN 12165
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2022
ICS 77.150.30 Will supersede EN 12165:2016
English Version
Copper and copper alloys - Wrought and unwrought
forging stock
Cuivre et alliages de cuivre - Barres corroyées et brutes Kupfer und Kupferlegierungen - Vormaterial für
pour matriçage Schmiedestücke
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 133.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12165:2022 E
worldwide for CEN national Members.
oSIST prEN 12165:2022
prEN 12165:2022 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Designations. 7
4.1 Material . 7
4.1.1 General . 7
4.1.2 Symbol . 7
4.1.3 Number . 7
4.2 Material condition . 7
4.3 Product . 7
5 Ordering information . 9
6 Requirements . 10
6.1 Composition . 10
6.2 Mechanical properties . 10
6.3 Resistance to dezincification . 10
6.4 Dimensions and tolerances . 10
6.4.1 Diameter . 10
6.4.2 Deviation from circular form . 11
6.4.3 Length . 11
6.4.4 Straightness . 11
6.5 Surface quality. 11
6.6 Internal inclusion . 12
7 Sampling . 12
7.1 General . 12
7.2 Analysis . 12
7.3 Hardness and dezincification resistance tests . 12
8 Test methods . 12
8.1 Analysis . 12
8.2 Hardness test . 12
8.2.1 General . 12
8.2.2 Preparation of samples . 13
8.2.3 Procedure for testing . 13
8.3 Dezincification resistance test . 13
8.4 Retests for analysis, hardness and dezincification resistance . 13
8.5 Rounding of results . 13
9 Declaration of conformity and inspection documentation . 14
9.1 Declaration of conformity . 14
9.2 Inspection documentation . 14
10 Marking, packaging, labelling . 14
Bibliography . 27
oSIST prEN 12165:2022
prEN 12165:2022 (E)
European foreword
This document (prEN 12165:2022) has been prepared by Technical Committee CEN/TC 133 “Copper
and copper alloys”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12165:2016
In comparison with EN 12165:2016, the following significant technical changes were made:
a) Introduction in the § 6.5 of eddy current test parameters;
b) Introduction of the § 6.6 Internal inclusion;
c) Modified the definition of diameter at § 6.4.1;
d) Added a new Figure for straightness at § 6.4.4 and modified values in Table 11;
e) Introduction in the chemical composition Tables of a footnote to explain the meaning of elements
for which no upper and lower limits are defined;
f) CuZn4Si4MnP (CW245E) and CuZn9Si4MnP (CW246E) added in the new Table 3
g) Chemical composition of CuZn39Pb3 (CW614N), CuZn40Pb2 (CW617N), CuZn35Pb1,5AlAs
(CW625N) and CuZn33Pb1,5AlAs (CW626N) modified in Table 8;
h) Added a new alloy CuZn40Pb1 (CW627N) in Table 8;
i) Chemical composition of CuZn33Pb1AlSiAs (CW725R) modified in Table 9;
j) Added a new alloy CuZn36Si1P (CW726R) in Table 9;
k) Removed Tables of Mechanical properties (old Table 9, Table 10, Table 11, Table 12, Table 13,
Table 14, Table 15 and Table 16);
l) Renamed Table 17 in Table 10, Table 18 in Table 11, Table 19 in Table 12;
m) Added new Table 13.
This document is one of a series of European Standards for the copper and copper alloy products rod,
wire, profile and forgings. Other products are specified as follows:
— EN 12163, Copper and copper alloys — Rod for general purposes;
— EN 12164, Copper and copper alloys — Rod for free machining purposes;
— EN 12166, Copper and copper alloys — Wire for general purposes;
— EN 12167, Copper and copper alloys — Profiles and bars for general purposes;
— EN 12168, Copper and copper alloys — Hollow rod for free machining purposes;
— EN 12420, Copper and copper alloys — Forgings;
oSIST prEN 12165:2022
prEN 12165:2022 (E)
— EN 13601, Copper and copper alloys — Copper rod, bar and wire for general electrical purposes;
— EN 13602, Copper and copper alloys — Drawn round copper wire for the manufacture of electrical
conductors;
— EN 13605, Copper and copper alloys — Copper profiles and profiled wires for electrical purposes.
oSIST prEN 12165:2022
prEN 12165:2022 (E)
Introduction
The European Committee for Standardization (CEN) draws attention to the fact that it is claimed that
compliance with this document may involve the use of a patent concerning the alloys
CuZn4Si4MnP (CW245E), CuZn9Si4MnP (CW246E), CuZn33Pb1AlSiAs (CW725R), and
CuZn36Si1P (CW726R) given in 6.1.
CEN takes no position concerning the evidence, validity and scope of this patent right.
The holder of this patent right has ensured the CEN that he is willing to negotiate licenses either free of
charge or under reasonable and non-discriminatory terms and conditions with applicants throughout
the world. In this respect, the statement of the holder of this patent right is registered with CEN.
— For CuZn4Si4MnP (CW245E) and CuZn9Si4MnP (CW246E) information may be obtained from:
Viega Technology GmbH & Co. KG
Viega Platz 1
57439 Attendorn
GERMANY
— For CuZn33Pb1AlSiAs (CW725R) information may be obtained from:
Diehl Brass Solutions Stiftung & Co. KG
Heinrich-Diehl-Straße 9
D-90552 Röthenbach/Pegnitz
GERMANY
— For CuZn36Si1P (CW726R) information may be obtained from:
Luvata Oy
Kuparitie 5
28330 Pori
FINLAND
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights other than those identified above. CEN shall not be held responsible for identifying any or
all such patent rights.
CEN and CENELEC maintain online lists of patents relevant to their standards. Users are encouraged to
consult the lists for the most up to date information concerning patents
).
(ftp://ftp.cencenelec.eu/EN/IPR/Patents/IPRdeclaration.pdf
Due to developing legislation, the composition of a material may be restricted to the composition
specified in this European Standard with respect to individual uses (e.g. for the use in contact with
drinking water in some Member States of the European Union). These individual restrictions are not
part of this European Standard. Nevertheless, for materials for which traditional and major uses are
affected, these restrictions are indicated. The absence of an indication, however, does not imply that the
material can be used in any application without any legal restriction.
oSIST prEN 12165:2022
prEN 12165:2022 (E)
1 Scope
This document specifies the composition, property requirements and dimensional tolerances for
forging stock of copper and copper alloys.
The sampling procedures and the methods o
...