|
IEC 61747-30-5
Edition 1.0 2019-01
INTERNATIONAL
STANDARD
colour
inside
Liquid crystal display devices –
Part 30-5: Optical measuring methods of transmissive transparent LCD modules
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 61747-30-5
Edition 1.0 2019-01
INTERNATIONAL
STANDARD
colour
inside
Liquid crystal display devices –
Part 30-5: Optical measuring methods of transmissive transparent LCD modules
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.120 ISBN 978-2-8322-6420-1
– 2 – IEC 61747-30-5:2019 IEC 2019
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and units . 6
4 Measurement conditions . 7
4.1 Standard measurement environmental conditions . 7
4.2 Standard measurement darkroom conditions. 8
4.3 Standard measurement locations . 8
5 Measurement methods of on-screen properties . 8
5.1 Measurement equipment and its setup . 8
5.2 Measurement methods . 9
6 Measurement methods of through-screen properties . 10
6.1 Luminous transmittance and its uniformity . 10
6.1.1 Purpose . 10
6.1.2 Measurement conditions . 10
6.1.3 Measurement methods . 10
6.2 Transmitted haze . 11
6.2.1 Purpose . 11
6.2.2 Measurement conditions . 11
6.2.3 Test apparatus . 11
6.2.4 Procedure . 13
6.2.5 Results . 14
6.2.6 Reporting . 14
6.3 Colour shift . 14
6.3.1 Purpose . 14
6.3.2 Measurement conditions . 14
6.3.3 Test apparatus . 14
6.3.4 Procedure . 15
6.3.5 Reporting . 15
6.4 Contrast ratio offset . 16
6.4.1 Purpose . 16
6.4.2 Measurement conditions . 16
6.4.3 Test apparatus . 16
6.4.4 Procedure . 16
6.4.5 Reporting . 17
6.5 Sharpness . 17
6.5.1 Purpose . 17
6.5.2 Measuring conditions . 17
6.5.3 Test apparatus . 17
6.5.4 Procedure . 18
6.5.5 Results . 18
6.5.6 Reporting . 20
6.6 MTF and Michelson contrast ratio . 20
6.6.1 Purpose . 20
6.6.2 Measurement conditions . 20
6.6.3 Measurement methods . 20
6.6.4 Reporting . 22
7 Contrast ratio and colour coordinates with the incident illumination originating
from objects behind the screen . 22
7.1 Purpose . 22
7.2 Measurement method with white light source . 24
7.2.1 General . 24
7.2.2 Measurement conditions . 24
7.2.3 Measurement method . 24
7.3 Measurement method with collimated or directional light source . 25
7.3.1 Purpose . 25
7.3.2 Measurement conditions . 25
7.3.3 Measurement method background . 26
7.3.4 Measurement method . 26
Bibliography . 27
Figure 1 – Measurement points . 8
Figure 2 – Measurement equipment and its configuration . 9
Figure 3 – Measurement configuration with light source . 10
Figure 4 – Schematic arrangement of the apparatus (TOP view) . 13
Figure 5 – Measurement system and its configuration . 15
Figure 6 – Reference object and its configuration . 16
Figure 7 – Example reference object and its configuration . 18
Figure 8 – Luminance curve of reference object . 19
Figure 9 – Definition of test parameters . 20
Figure 10 – Reference object and its configuration. 21
Figure 11 – Relationship between stripe frequency and MTF . 22
Figure 12 – Geometry of the transparent display and the bright background object . 23
Figure 13 – Case with bright backgrounds . 23
Figure 14 – Measurement configuration for transparent display with background object . 25
Table 1 – Measurements . 13
Table 2 – Measurement results . 16
Table 3 – Data summary for contrast offset . 17
Table 4 – Example of reported specification of two-dimensional LMD . 18
– 4 – IEC 61747-30-5:2019 IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
LIQUID CRYSTAL DISPLAY DEVICES –
Part 30-5: Optical measuring methods of transmissive
transparent LCD modules
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and th
...