|
IEC 62783-1
Edition 1.0 2019-01
INTERNATIONAL
STANDARD
Twinax cables for digital communications –
Part 1: Generic specification
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and electrical
bibliographical information on IEC International Standards, terms containing 21 000 terms and definitions in English and
Technical Specifications, Technical Reports and other French, with equivalent terms in 16 additional languages. Also
documents. Available for PC, Mac OS, Android Tablets and known as the International Electrotechnical Vocabulary (IEV)
iPad. online.
IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of IEC
committee,…). It also gives information on projects, replaced publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and
CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and also If you wish to give us your feedback on this publication or need
once a month by email. further assistance, please contact the Customer Service
.
IEC 62783-1
Edition 1.0 2019-01
INTERNATIONAL
STANDARD
Twinax cables for digital communications –
Part 1: Generic specification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.120.20 ISBN 978-2-8322-6249-8
– 2 – IEC 62783-1:2019 © IEC 2019
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 9
4 Requirements for cables construction . 9
4.1 General remarks . 9
4.2 Cable construction . 9
4.2.1 General . 9
4.2.2 Conductor . 9
4.2.3 Insulation . 10
4.2.4 Colour code . 10
4.2.5 Drain wire . 10
4.2.6 Screening of cable assembly element . 10
4.2.7 Cable make-up . 10
4.2.8 Screening of the cable core . 10
4.2.9 Sheath . 10
4.2.10 Colour of sheath . 11
4.2.11 Identification . 11
4.2.12 Finished cable . 11
5 Requirements and test methods . 11
5.1 General . 11
5.2 Electrical tests . 12
5.2.1 Conductor resistance . 12
5.2.2 Resistance unbalance. 12
5.2.3 Dielectric strength . 12
5.2.4 Insulation resistance . 12
5.2.5 Mutual capacitance . 12
5.2.6 Surface transfer impedance . 12
5.3 Transmission requirements and tests . 12
5.3.1 General . 12
5.3.2 Characteristic impedance . 13
5.3.3 Return loss . 13
5.3.4 Attenuation . 13
5.3.5 Propagation delay, inter-element delay skew, and intra-element delay
skew . 14
5.3.6 Near-end crosstalk (NEXT) . 14
5.3.7 Attenuation to crosstalk ratio far-end (ACR-F) . 15
5.3.8 Transverse conversion loss (TCL) . 15
5.3.9 Equal level transverse conversion transfer loss (ELTCTL) . 15
5.3.10 Screening attenuation . 15
5.3.11 Coupling attenuation . 15
5.4 Mechanical and dimensional requirements and test methods . 15
5.4.1 General . 15
5.4.2 Measurement of dimensions . 15
5.4.3 Elongation at break of the conductor. 16
5.4.4 Tensile strength of the insulation . 16
5.4.5 Elongation at break of the sheath . 16
5.4.6 Tensile strength of the sheath . 16
5.4.7 Crush test of the cable . 16
5.4.8 Impact test of the cable . 16
5.4.9 Repeated bending of the cable . 16
5.4.10 Tensile performance of the cable . 16
5.5 Environmental tests . 16
5.5.1 Shrinkage of the insulation . 16
5.5.2 Wrapping test of the insulation after thermal ageing . 16
5.5.3 Bending test of the insulation at low temperature . 16
5.5.4 Tensile strength and elongation of the sheath after ageing . 16
5.5.5 Sheath pressure test at high temperature . 16
5.5.6 Cold bend test of the cable . 17
5.5.7 Heat shock test . 17
5.5.8 Flame propagation characteristics of a single cable . 17
5.5.9 Flame propagation characteristics of bunched cables . 17
5.5.10 Smoke generation . 17
5.5.11 Combined flame and smoke test for cables in environmental air
handling spaces . 17
Bibliography . 18
Table 1 – Nominal attenuation values, dB/10 m . 13
– 4 – IEC 62783-1:2019 © IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
TWINAX CABLES FOR DIGITAL COMMUNICATIONS –
Part 1: Generic specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC sha
...