|
IEC 63068-1
Edition 1.0 2019-01
INTERNATIONAL
STANDARD
Semiconductor devices – Non-destructive recognition criteria of defects in
silicon carbide homoepitaxial wafer for power devices –
Part 1: Classification of defects
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 63068-1
Edition 1.0 2019-01
INTERNATIONAL
STANDARD
Semiconductor devices – Non-destructive recognition criteria of defects in
silicon carbide homoepitaxial wafer for power devices –
Part 1: Classification of defects
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.080.99 ISBN 978-2-8322-6479-9
– 2 – IEC 63068-1:2019 © IEC 2019
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Classification of defects . 10
4.1 General . 10
4.2 Description of the defect classes. 11
4.2.1 Examples of defects . 11
4.2.2 Point defect . 11
4.2.3 Micropipe . 11
4.2.4 TSD . 12
4.2.5 TED . 13
4.2.6 BPD . 14
4.2.7 Scratch trace . 15
4.2.8 Stacking fault . 16
4.2.9 Propagated stacking fault . 17
4.2.10 Stacking fault complex . 18
4.2.11 Polytype inclusion . 19
4.2.12 Particle inclusion . 20
4.2.13 Bunched-step segment . 21
4.2.14 Surface particle . 22
4.2.15 Others . 22
Bibliography . 23
Figure 1 – Micropipe . 12
Figure 2 – TSD . 13
Figure 3 – TED . 14
Figure 4 – BPD . 15
Figure 5 – Scratch trace . 16
Figure 6 – Stacking fault . 17
Figure 7 – Propagated stacking fault . 18
Figure 8 – Stacking fault complex . 19
Figure 9 – Polytype inclusion . 20
Figure 10 – Particle inclusion . 21
Figure 11 – Bunched-step segment . 22
Table 1 – Classification of defects . 11
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SEMICONDUCTOR DEVICES –
NON-DESTRUCTIVE RECOGNITION CRITERIA OF DEFECTS IN SILICON
CARBIDE HOMOEPITAXIAL WAFER FOR POWER DEVICES –
Part 1: Classification of defects
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 63068-1 has been prepared by IEC technical committee 47:
Semiconductor devices.
The text of this International Standard is based on the following documents:
CDV Report on voting
47/2474/CDV 47/2521A/RVC
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
– 4 – IEC 63068-1:2019 © IEC 2019
A list of all parts in the IEC 63068 series, published under the general title Semiconductor
devices – Non-destructive recognition criteria of defects in silicon carbide homoepitaxial wafer
for power devices, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
INTRODUCTION
Silicon carbide (SiC) is widely used as a semiconductor material for next-generation power
semiconductor devices. SiC, as compared with silicon (Si), has superior physical properties
such as a higher breakdown electric field, higher thermal conductivity, lower thermal
generation rate, higher saturated electron drift velocity, and lower intrinsic carrier
concentration. Their attributes realize SiC-based power semiconductor devices with faster
switching speeds, lower losses, higher blocking voltages, and higher temperature operation
relative to standard Si-based power semiconductor devices.
SiC-based power semiconductor devices are not fully realized due to high costs, low yield,
and perceived reliability concerns. One of the serious issues lies in the defects existing in SiC
homoepitaxial wafers. Although an effort of decreasing defects in the SiC homoepitaxial layer
is actively implemented, there are a number of defects (approximately 1 000 defects/cm ) in
commercially available SiC homoepitaxial wafers. Therefore, it is indispensable to establish
an international standard regarding the quality assessment of SiC homoepitaxial wafers.
The IEC 63068 series of standards is planned to comprise Part 1, Part 2, and Part 3, as
detailed below. The outline of this Part 1 is to list, illustrate and provide reference for various
characteristic features and defects that are observed on SiC homoepitaxial wafers of
crystallographic polytype 4H used in high-power semiconductor device manufacturing.
Part 1: Classification of defects
Part 2: Test method for defects using optical inspection
Part 3: Test method for defects using photoluminescence
– 6 – IEC 63068-1:2019 © IEC 2019
SEMICONDUCTOR DEVICES –
NON-DESTRUCTIVE RECOGNITION CRITERIA OF DEFECTS IN SILICON
CARBIDE HOMOEPITAXIAL WAFER FOR POWER DEVICES –
Part 1: Classification of defects
1 Scope
This part of IEC 63068 gives a classification of defects in
...