|
IEC TS 63060
Edition 1.0 2019-02
TECHNICAL
SPECIFICATION
Electric energy supply networks – General aspects and methods for the
maintenance of installations and equipment
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC TS 63060
Edition 1.0 2019-02
TECHNICAL
SPECIFICATION
Electric energy supply networks – General aspects and methods for the
maintenance of installations and equipment
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.240.01 ISBN 978-2-8322-6562-8
– 2 – IEC TS 63060:2019 © IEC 2019
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General aspects of maintenance and maintenance management . 11
5 Management of maintenance . 13
5.1 Structure of maintenance management . 13
5.2 Principles and roles . 14
5.3 Maintenance concept . 14
5.4 Maintenance plan . 15
6 Conducting maintenance tasks . 15
6.1 General . 15
6.2 Planning of maintenance activities . 16
6.3 Instructions of maintenance activities . 16
7 Documentation and analysis . 16
7.1 Documentation . 16
7.2 Statistics . 17
7.3 Additional analysis . 17
8 Assessment and improvement of maintenance concepts. 18
Annex A (informative) Notes on types of maintenance . 19
A.1 Types of maintenance . 19
A.2 Corrective maintenance . 19
A.2.1 General . 19
A.2.2 Maintenance after the occurrence of a malfunction . 19
A.2.3 Repair after failure . 19
A.3 Preventive maintenance . 19
A.3.1 General . 19
A.3.2 Condition-based maintenance . 20
A.3.3 Periodic maintenance . 20
A.3.4 Maintenance after extraordinary operating conditions . 20
A.4 Reliability-centred maintenance . 20
A.5 Risk-based maintenance . 21
Annex B (informative) Condition assessment of equipment and installations . 22
B.1 Information for use . 22
B.2 Selection catalogue for activities to determine the actual condition of
equipment/installations of electrical supply systems . 23
B.2.1 Substations/installations . 23
B.2.2 Low voltage installations . 29
B.2.3 Fuses . 31
B.2.4 Power transformers and reactors . 31
B.2.5 Surge arrester . 32
B.2.6 Overhead lines . 32
B.2.7 Cable systems, power cables and insulated power lines . 33
B.2.8 Protection, measuring relays and protective devices . 34
B.2.9 Telecontrol systems and network technology . 35
Bibliography . 36
Figure 1 – Influence of maintenance actions with different strategies on the availability
of equipment . 12
Table 1 – Structure of maintenance management . 13
– 4 – IEC TS 63060:2019 © IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC ENERGY SUPPLY NETWORKS – GENERAL ASPECTS
AND METHODS FOR THE MAINTENANCE OF INSTALLATIONS
AND EQUIPMENT
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote interna-
tional co-operation on all questions concerning standardization in the electrical and electronic fields. To this
end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Tech-
nical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publica-
tion(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the
subject dealt with may participate in this preparatory work. International, governmental and non-governmental
organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the Interna-
tional Organization for Standardization (ISO) in accordance with conditions determined by agreement between
the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all inter-
ested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinter-
pretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence be-
tween any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and ex-
penses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publica-
tions.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. In excep-
tional circumstances, a technical committee may propose the publication of a Technical
Specification when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development or where, for any other reason, there is the
future but no immediate possibility of an agreement on an International Standard.
Technical Specifications are subject to review within three years of publication to decide
whether they can be transformed into International Standards.
IEC TS 63060, which is a Technical Specification, has been prepared by IEC technical com-
mittee 8: System aspects of electrical energy supply.
The text of this Technical Specification is based on the following documents:
Enquiry draft Report on voting
8/1470/DTS 8/1488/RVDTS
Full information on the voting for the approval of this Technical Specification can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• transformed into an International Standard,
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
– 6 – IEC TS 63060:2019 © IEC 2019
INTRODUCTION
Maintenance (MA) and maintenance support provide an important contribution to ensure the
reliability of components and electric installations throughout their operating life cycle. The
correct functionality, performance, and reliability will be achieved by providing t
...