|
ISO/IEC 14543-5-12
Edition 1.0 2019-04
INTERNATIONAL
STANDARD
Information technology – Home electronic system (HES) architecture –
Part 5-12: Intelligent grouping and resource sharing for HES Class 2 and Class 3 –
Remote access test and verification
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about
ISO/IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address
below or your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
ISO/IEC 14543-5-12
Edition 1.0 2019-04
INTERNATIONAL
STANDARD
Information technology – Home electronic system (HES) architecture –
Part 5-12: Intelligent grouping and resource sharing for HES Class 2 and Class 3 –
Remote access test and verification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 35.240.67 ISBN 978-2-8322-6796-7
– 2 – ISO/IEC 14543-5-12:2019
© ISO/IEC 2019
CONTENTS
FOREWORD . 4
INTRODUCTION . 5
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 8
4 Conformance . 8
5 Overview . 8
5.1 Purpose . 8
5.2 Test configuration . 8
5.3 Requirement of verification . 9
5.4 Test environment . 9
6 IGRS RA test suite structure . 9
6.1 Structure overview . 9
6.2 IGRS RA user conformance test suite . 10
6.3 IGRS RA device conformance test suite . 10
6.4 Rules of the test suite . 11
7 IGRS RA user conformance test suite . 11
7.1 User register conformance test suite . 11
7.1.1 Message and flow . 11
7.1.2 Test case set . 11
7.2 User login conformance test suite . 12
7.2.1 Message and flow . 12
7.2.2 Test case set . 12
7.3 Relationship establishment conformance test suite . 12
7.3.1 Message and flow . 12
7.3.2 Test case set . 13
7.4 Relationship releasing conformance test suite . 13
7.4.1 Message and flow . 13
7.4.2 Test case . 13
7.5 Device verification code management conformance test suite . 14
7.5.1 Message and flow . 14
7.5.2 Test case . 14
7.6 Device access rights configuration conformance test suite . 15
7.6.1 Message and flow . 15
7.6.2 Test case . 15
7.7 Message exchange conformance test suite . 16
7.7.1 Message and flow . 16
7.7.2 Test case set . 16
7.8 User logout conformance test suite . 17
7.8.1 Message and flow . 17
7.8.2 Test case set . 18
8 IGRS RA device conformance test suite . 18
8.1 Device registration conformance test suite . 18
8.1.1 Message and flow . 18
© ISO/IEC 2019
8.1.2 Test case set . 18
8.2 Device login conformance test suite . 19
8.2.1 Message and flow . 19
8.2.2 Test case set . 19
8.3 Relationship releasing conformance test suite . 19
8.3.1 Message and flow . 19
8.3.2 Test case set . 20
8.4 Device verification code management conformance test suite . 20
8.4.1 Message and flow . 20
8.4.2 Test case . 20
8.5 Message exchange conformance test suite . 21
8.5.1 Message and flow . 21
8.5.2 Test case set . 21
8.6 Device logout conformance test suite . 23
8.6.1 Message and flow . 23
8.6.2 Test case . 23
Bibliography . 24
Figure 1 – Environment configuration for IGRS RA conformance test . 9
Figure 2 – Structure of IGRS conformance test suite. 10
Table 1 – Test conditions under normal environment . 9
– 4 – ISO/IEC 14543-5-12:2019
© ISO/IEC 2019
INFORMATION TECHNOLOGY –
HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE –
Part 5-12: Intelligent grouping and resource sharing
for HES Class 2 and Class 3 – Remote access test and verification
FOREWORD
1) ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission)
form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC
participate in the development of International Standards through technical committees established by the
respective organization to deal with particular fields of technical activity. ISO and IEC technical committees
collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in
liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have
established a joint technical committee, ISO/IEC JTC 1.
2) The formal decisions or agreements of IEC and ISO on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested IEC National Committees and ISO member bodies.
3) IEC, ISO and ISO/IEC publications have the form of recommendations for international use and are accepted
by IEC National Committees and ISO member bodies in that sense. While all reasonable efforts are made to
ensure that the technical content of IEC, ISO and ISO/IEC publications is accurate, IEC or ISO cannot be held
responsible for the way in which they are used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees and ISO member bodies undertake to
apply IEC, ISO and ISO/IEC publications transparently to the maximum extent possible in their national and
regional publications. Any divergence between any ISO, IEC or ISO/IEC publication and the corresponding
national or regional publication should be clearly indicated in the latter.
5) ISO and IEC do not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. ISO or IEC are not responsible
for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or ISO or its directors, employees, servants or agents including individual experts
and members of their technical committees and IEC National Committees or ISO member bodies for any
personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for
costs (including legal fees) and expenses arising out of the publication of, use of, or reliance upon, this ISO/IEC
publication or any other IEC, ISO or ISO/IEC publications.
8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this ISO/IEC publication may be the subject of
patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent rights.
International Standard ISO/I
...