IEC 61158-3-2:2014

Industrial communication networks - Fieldbus specifications - Part 3-2: Data-lonk layer service definition - Type 2 elements

IEC 61158-3-2:2014

Name:IEC 61158-3-2:2014   Standard name:Industrial communication networks - Fieldbus specifications - Part 3-2: Data-lonk layer service definition - Type 2 elements
Standard number:IEC 61158-3-2:2014   language:English language
Release Date:17-Apr-2019   technical committee:SC 65C - Industrial networks
Drafting committee:   ICS number:25.040.40 - Industrial process measurement and control

IEC 61158-3-2
Edition 2.1 2019-04
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Fieldbus specifications –
Part 3-2: Data-link layer service definition – Type 2 elements








your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

.
IEC 61158-3-2
Edition 2.1 2019-04
CONSOLIDATED VERSION
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Fieldbus specifications –

Part 3-2: Data-link layer service definition – Type 2 elements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.20; 35.110 ISBN 978-2-8322-6856-8

IEC 61158-3-2
Edition 2.1 2019-04
CONSOLIDATED VERSION
REDLINE VERSION
colour
inside
Industrial communication networks – Fieldbus specifications –
Part 3-2: Data-link layer service definition – Type 2 elements

– 2 – IEC 61158-3-2:2014+AMD1:2019 CSV

© IEC 2019
CONTENTS
FOREWORD . 4

INTRODUCTION . 6

INTRODUCTION to the Amendment . 6

1 Scope . 7

1.1 General . 7

1.2 Specifications . 7

1.3 Conformance . 7

2 Normative references . 8
3 Terms, definitions, symbols, abbreviations and conventions . 8
3.1 Reference model terms and definitions . 8
3.2 Service convention terms and definitions . 10
3.3 Common data-link service terms and definitions . 11
3.4 Additional Type 2 data-link specific definitions . 12
3.5 Common symbols and abbreviations . 15
3.6 Additional Type 2 symbols and abbreviations . 15
3.7 Common conventions . 15
4 Connection-mode and connectionless-mode data-link service . 16
4.1 Overview . 16
4.2 Facilities of the data-link service . 20
4.3 Model of the data-link service . 21
4.4 Sequence of primitives . 23
4.5 Connection-mode data transfer . 25
4.6 Connectionless-mode data transfer . 27
4.7 Queue maintenance . 30
4.8 Tag filter . 32
5 DL-management services . 33
5.1 Sequence of primitives . 33
5.2 Link synchronization . 34
5.3 Synchronized parameter change . 35
5.4 Event reports . 37
5.5 Bad FCS . 39
5.6 Current moderator . 39

5.7 Enable moderator . 40
5.8 Power-up and online . 41
5.9 Listen only . 42
5.10 Time distribution . 43
Bibliography . 45

Figure 1 – Relationships of DLSAPs, DLSAP-addresses and group DL-addresses . 11
Figure 2 – NUT structure . 18
Figure 3 – Medium access during scheduled time . 18
Figure 4 – Medium access during unscheduled time . 19
Figure 5 – Queue model for the peer and multipoint DLS, DLSAPs and their DLCEPs . 20
Figure 6 – Queue model of a multipoint DLS between a sending DLS-user and one or
more receiving DLS-users . 22

© IEC 2019
Figure 7 – DLS primitive time-sequence diagram . 24

Figure 8 – State transition diagram for sequences of DLS primitives at one DLSAP . 25

Figure 9 – Sequence of primitives for a successful connection-mode transfer . 27

Figure 10 – Sequence of primitives for an unsuccessful connection-mode transfer . 27

Figure 11 – Sequence of primitives for a successful connectionless-mode transfer . 30

Figure 12 – Sequence of primitives for an unsuccessful connectionless-mode transfer . 30

Figure 13 – Sequence of primitives for a queue maintenance request . 32

Figure 14 – Sequence of primitives for a tag filter request. 33

Figure 15 – Sequence of primitives for a local link synchronization . 35
Figure 16 – Sequence of primitives for a DLM-get/set parameters request . 37
Figure 17 – Sequence of primitives for a DLM-tMinus change request . 37
Figure 18 – Sequence of primitives for a DLM-event indication . 39
Figure 19 – Sequence of primitives for a DLM-bad-FCS indication . 39
Figure 20 – Sequence of primitives for a DLM-current-moderator indication . 40
Figure 21 – Sequence of primitives for a DLM-enable-moderator request . 41
Figure 22 – Sequence of primitives for a DLM-power-up indication . 42
Figure 23 – Sequence of primitives for a DLM-online request. 42
Figure 24 – Sequence of primitives for a DLM-listen-only request . 42

Table 1 – Summary of connection-mode and connectionless-mode primitives and
parameters . 24
Table 2 – DL-connection-mode transfer primitives and parameters . 26
Table 3 – DL-connectionless-mode transfer primitives and parameters . 28
Table 4 – Fixed tag services available to the DLS-user . 29
Table 5 – DL-queue maintenance primitives and parameters . 31
Table 6 – DL-connectionless-mode tag filter primitives and parameters . 32
Table 7 – Summary of DL-management primitives and parameters . 34
Table 8 – Link synchronization primitives and parameters . 35
Table 9 – Synchronized parameter change primitives and parameters . 36
Table 10 – DLMS-configuration-data . 36
Table 11 – Event report primitives and parameters . 38

Table 12 – DLMS events being reported . 38
Table 13 – Bad FCS primitives and parameters . 39
Table 14 – Current moderator primitives and parameters . 40
Table 15 – Enable moderator primitives and parameters . 40
Table 16 – Power-up and online primitives and parameters . 41
Table 17 – Listen-only primitives and parameters . 42
Table 18 – DLMS time and time quality parameters . 43
Table 19 – Time distribution source quality . 44

– 4 – IEC 61158-3-2:2014+AMD1:2019 CSV

© IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION

____________
INDUSTRIAL COMMUNICATION NETWORKS –

FIELDBUS SPECIFICATIONS –
Part 3-2: Data-link layer service definition –

Type 2 elements
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27