|
IEC TS 62715-5-4
Edition 1.0 2019-05
TECHNICAL
SPECIFICATION
colour
inside
Flexible display devices –
Part 5-4: Measuring method of blur in flexible transparent displays
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC TS 62715-5-4
Edition 1.0 2019-05
TECHNICAL
SPECIFICATION
colour
inside
Flexible display devices –
Part 5-4: Measuring method of blur in flexible transparent displays
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.120 ISBN 978-2-8322-6928-2
– 2 – IEC TS 62715-5-4:2019 IEC 2019
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms . 5
4 Measuring conditions . 6
4.1 Standard measuring environmental conditions . 6
4.2 Standard darkroom conditions . 6
4.3 Standard setup conditions . 6
4.3.1 Display mounting . 6
4.3.2 Measuring configuration . 6
4.3.3 Starting conditions of measurements . 7
4.3.4 Conditions of measuring equipment . 7
5 Blur caused by a flexible transparent display . 8
5.1 Purpose . 8
5.2 Measuring conditions . 9
5.3 Measuring method . 9
Annex A (informative) Example of blur measurement configuration . 13
A.1 Purpose . 13
A.2 Examples of parameters in blur measurement . 13
Bibliography . 16
Figure 1 – Geometric configuration of measuring system . 7
Figure 2 – Layout diagram of measurement setup . 8
Figure 3 – Examples of test pattern with and without blur and luminance
measurements . 9
Figure 4 – Schematic diagram to illustrate the method of calculating the standard
deviation specifying the Gaussian blur model . 11
Figure A.1 – Examples of different levels of blur . 13
Table 1 – Example of test report for blur measure . 12
Table A.1 – Examples of the maximum measurement field diameter for different
values of blur width . 14
Table A.2 – Examples of the maximum measurement field diameter for different
values of blur width . 14
Table A.3 – Examples of PPI for different configurations of a reference display device . 14
Table A.4 – Examples of combinations of measurement field diameter and
corresponding distance from the LMD to the reference display device yielding a
measurement field angle of 1° . 15
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FLEXIBLE DISPLAY DEVICES –
Part 5-4: Measuring method of blur in flexible transparent displays
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. In
exceptional circumstances, a technical committee may propose the publication of a technical
specification when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development or where, for any other reason, there is the
future but no immediate possibility of an agreement on an International Standard.
Technical specifications are subject to review within three years of publication to decide
whether they can be transformed into International Standards.
IEC TS 62715-5-4, which is a technical specification, has been prepared by IEC technical
committee 110: Electronic displays.
– 4 – IEC TS 62715-5-4:2019 IEC 2019
The text of this technical specification is based on the following documents:
Enquiry draft Report on voting
110/1055/DTS 110/1084/RVTDS
Full information on the voting for the approval of this technical specification can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62715 series, published under the general title Flexible display
devices, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
FLEXIBLE DISPLAY DEVICES –
Part 5-4: Measuring method of blur in flexible transparent displays
1 Scope
This part of IEC 62715 specifies the measuring conditions and measuring methods for
determining the blur of objects when viewed through a flexible transparent display. This
document mainly applies to flexible transparent display modules that have a constant radius
curvature about a single axis. The display is measured in a static mechanical state.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 62715-1-1, Flexible display devices – Part 1-1: Terminology and letter symbols
IEC 62715-5-1, Flexible display devices – Part 5-1: Measuring methods of optical
performance
3 Terms, definitions and abbreviated terms
For the purposes of this part of IEC 62715, the terms and definitions in IEC 62715-1-1 and the
following apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1 Terms and definitions
3.1.1
blur
unclear or indistinct outline of objects when they are viewed through a flexible transparent
display
3.1.2
through-screen pr
...