|
IEC 62848-2
Edition 1.0 2019-06
INTERNATIONAL
STANDARD
Railway applications – DC surge arresters and voltage limiting devices –
Part 2: Voltage limiting devices
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 62848-2
Edition 1.0 2019-06
INTERNATIONAL
STANDARD
Railway applications – DC surge arresters and voltage limiting devices –
Part 2: Voltage limiting devices
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 45.060.01 ISBN 978-2-8322-6884-1
– 2 – IEC 62848-2:2019 © IEC 2019
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Classes of VLD . 9
5 Characteristics and requirements of the VLDs . 10
5.1 Marking . 10
5.2 Service requirements . 11
5.2.1 Normal outdoor service conditions . 11
5.2.2 Normal indoor service conditions . 11
5.2.3 Abnormal service conditions . 11
5.3 General characteristics . 12
5.4 Minimum requirements . 12
5.4.1 Response time . 12
5.4.2 Additional requirements for VLDs of Class 1 . 12
5.4.3 Additional requirements for VLDs of Classes 3 and 4 . 12
5.5 Electrical characteristics and thermal rating . 12
5.6 Protection of VLDs against lightning. 13
5.7 Command and control (Classes 3 and 4 only) . 13
5.7.1 Local control . 13
5.7.2 Remote signalling . 13
5.7.3 Operation and alarm recordings . 14
6 Type tests . 14
6.1 General . 14
6.2 Nominal triggering voltage U and non-triggering voltage U . 15
Tn W
6.2.1 Procedure for welding shut spark gap VLDs (Class 1) . 15
6.2.2 Procedure for thyristor type VLDs (Class2) . 16
6.2.3 Procedure for mechanical switching VLDs and for combined thyristors
with mechanical switching devices VLDs (Class 3 and Class 4) . 17
6.3 Leakage current . 17
6.4 DC current withstand . 18
6.4.1 General . 18
6.4.2 DC rated current test . 18
6.4.3 Short time withstand current test . 19
6.5 AC current withstand characteristics (optional). 20
6.6 Response time characteristics . 20
6.6.1 Response time for DC voltage . 20
6.6.2 Response time for combined AC-DC voltage . 22
6.7 Lightning current impulse withstand characteristics for VLDs exposed to
direct lightning strikes . 24
6.8 Recovery voltage test (Classes 3, 4) . 25
6.9 Reverse voltage test (Class 2.1) . 26
6.10 Dielectric tests for panel type voltage limiting devices (Classes 3 and 4) . 27
6.10.1 Test conditions . 27
6.10.2 Power-frequency voltage withstand test . 27
6.11 Degree of protection of enclosures. 27
6.12 Environmental tests for outdoor equipment . 28
6.13 Determination of minimum current for safe short circuiting of Class 1 VLDs . 28
7 Routine tests . 29
7.1 General . 29
7.2 VLDs of Classes 3 and 4 . 29
7.3 Dielectric tests for panel type voltage limiting devices . 29
Annex A (informative) Preferred ranges of the principal properties of the VLDs. 30
Bibliography . 34
Figure 1 – Test circuit for testing of response time . 21
Figure 2 – T evaluation . 22
R
Figure 3 – Response time characteristic . 22
Figure 4 – Test circuit for testing of response time T for combined AC-DC voltage . 24
R
Figure 5 – Evaluation of response time T for combined AC-DC voltage . 24
R
Figure 6 – Circuit for the recovery voltage test . 26
Table 1 – Classes of voltage-limiting device. 10
Table 2 – Type tests . 15
Table 3 – Maximum response time as a function of DC voltages . 20
Table 4 – Response time for combined AC-DC voltages . 23
Table A.1 – Nominal triggering voltage U . 30
Tn
Table A.2 – Instantaneous triggering voltage U . 30
TI
Table A.3 – Rated current I . 30
r
Table A.4 – Short time withstand current I . 31
W
Table A.5 – Leakage current I . 31
L
Table A.6 – Making and breaking capacity . 31
Table A.7 – Lightning current impulse (8/20 µs) I . 31
imp-n
Table A.8 – High current impulse 8/20 μs and 4/10 μs I . 32
imp-high
Table A.9 – High charge impulse I . 32
imp-hc
Table A.10 – Current-time characteristic for safe short circuiting of Class 1 VLDs . 32
Table A.11 – Preferred parameters for high charge impulse I . 32
imp-hc
Table A.12 – Applicable tolerances according to IEC 61643-11:2011 . 33
– 4 – IEC 62848-2:2019 © IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RAILWAY APPLICATIONS –
DC SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES –
Part 2: Voltage limiting devices
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach
...