|
IEC 61158-6-26
Edition 1.0 2019-06
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 6-26: Application layer protocol specification – Type 26 elements
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 61158-6-26
Edition 1.0 2019-06
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 6-26: Application layer protocol specification – Type 26 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-7016-5
– 2 – IEC 61158-6-26:2019 © IEC 2019
CONTENTS
FOREWORD . 10
INTRODUCTION . 12
1 Scope . 13
1.1 General . 13
1.2 Specifications . 14
1.3 Conformance . 14
2 Normative references . 14
3 Terms, definitions, symbols, abbreviations and conventions . 15
3.1 Terms and definitions from other ISO/IEC standards . 15
3.1.1 Terms and definitions from ISO/IEC 7498-1 . 15
3.1.2 Terms and definitions from ISO/IEC 8822 . 16
3.1.3 Terms and definitions from ISO/IEC 9545 . 16
3.1.4 Terms and definitions from ISO/IEC 8824-1 . 16
3.1.5 Terms and definitions from ISO/IEC 8825-1 . 17
3.2 Type 26 specific terms and definitions . 17
3.3 Abbreviations and symbols . 21
3.4 Conventions . 23
3.4.1 Conventions used in state machines . 23
3.4.2 Convention for abstract syntax description . 24
3.4.3 Convention for reserved bits and octets . 24
3.4.4 Conventions for bit description in octets . 24
4 FAL syntax description . 25
4.1 General . 25
4.2 Overview of Type 26 fieldbus . 26
4.2.1 Application field and Common-memory . 26
4.2.2 Structure of Type 26 protocol . 27
4.2.3 Structure of Type 26 FAL . 28
4.2.4 Data link layer . 29
4.3 Operating principle . 29
4.3.1 Overview . 29
4.3.2 Logical ring maintenance . 30
4.3.3 Node addition . 33
4.3.4 Node in a logical ring . 36
4.3.5 Node drop-out . 36
4.3.6 Data transmission . 37
4.3.7 Data transmission frames . 46
4.4 FAL PDU abstract syntax . 49
4.4.1 Basic abstract syntax . 49
4.4.2 Transparent-msg- PDU . 51
4.4.3 Token-PDU . 51
4.4.4 Participation-req-PDU . 51
4.4.5 Byte-block-read PDUs . 51
4.4.6 Byte-block-write PDUs . 52
4.4.7 Word-block-read PDUs . 52
4.4.8 Word-block-write PDUs . 52
4.4.9 Network-parameter-read PDUs . 52
4.4.10 Network-parameter-write PDUs. 53
4.4.11 Stop-command PDUs . 53
4.4.12 Operation-command PDUs . 53
4.4.13 Profile-read PDUs . 53
4.4.14 Trigger-PDU . 54
4.4.15 Log-data-read PDUs . 54
4.4.16 Log-data-clear PDUs . 54
4.4.17 Message-return PDUs . 54
4.4.18 Vendor-specific-msg PDUs . 55
4.4.19 Start-TK-hld-time-mrmt PDUs . 55
4.4.20 Terminate-TK-hld-time-mrmt PDUs . 55
4.4.21 Start-GP_Comm-sndr-log PDUs . 56
4.4.22 Terminate-GP_Comm-sndr-log PDUs . 56
4.4.23 Set-remote-node-config-para PDUs . 56
4.4.24 Read-rmt-partici-node-mgt-info-para PDUs . 56
4.4.25 Read-rmt- node-mgt-info-para PDUs . 57
4.4.26 Read-rmt-node-set-info-para PDUs . 57
4.4.27 Reset-node PDUs . 57
4.4.28 Cyclic-data PDUs . 57
4.5 Data type assignments . 57
5 Transfer syntax . 59
5.1 Encoding rules . 59
5.1.1 Basic encoding . 59
5.1.2 Fixed length Unsigned encoding . 59
5.1.3 Fixed length BitString encoding . 59
5.1.4 OctetString encoding . 59
5.1.5 SEQUENCE encoding . 60
5.2 PDU elements encoding . 60
5.2.1 FALARHeader . 60
5.2.2 Transparent-msg PDU . 63
5.2.3 Token-PDU . 64
5.2.4 Participation-req-PDU . 65
5.2.5 Byte-block-read PDUs . 66
5.2.6 Byte-block-write PDUs . 67
5.2.7 Word-block-read PDUs . 69
5.2.8 Word-block-write PDUs . 71
5.2.9 Network-parameter-read PDUs . 73
5.2.10 Network-parameter-write PDUs. 76
5.2.11 Stop-command PDUs . 79
5.2.12 Operation-command PDUs . 81
5.2.13 Profile-read PDUs . 83
5.2.14 Trigger-PDU . 85
5.2.15 Log-data-read PDUs . 86
5.2.16 Log-data-clear PDUs . 92
5.2.17 Message-return PDUs . 94
5.2.18 Vendor-specific-msg PDUs . 96
5.2.19 Start-TK-hld-time-mrmt PDUs . 98
5.2.20 Terminate-TK-hld-time-mrmt PDUs . 100
5.2.21 Start-GP_Comm-sndr-log PDUs . 103
5.2.22 Terminate-GP_Comm-sndr-log PDUs . 104
– 4 – IEC 61158-6-26:2019 © IEC 2019
5.2.23 Set-remote-node-config-para PDUs . 107
5.2.24 Read-rmt-partici-node-mgt-info-para PDUs .
...