|
IEC TR 63238-1
Edition 1.0 2019-07
TECHNICAL
REPORT
colour
inside
Process management for avionics – Electronics design –
Part 1: Electrical signal properties, naming conventions and interface control
document (ICD)
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC TR 63238-1
Edition 1.0 2019-07
TECHNICAL
REPORT
colour
inside
Process management for avionics – Electronics design –
Part 1: Electrical signal properties, naming conventions and interface control
document (ICD)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 03.100.50; 31.020; 49.060 ISBN 978-2-8322-7187-2
– 2 – IEC TR 63238-1:2019 IEC 2019
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
Terms and definitions . 5
Abbreviated terms . 6
4 ICD description . 6
General . 6
Electrical interface . 7
ICD specification format . 7
General . 7
Format of the ICD specification . 7
ICD content . 8
Annex A (informative) Example of an ICD . 13
Bibliography . 15
Figure 1 – Example of an electronic schematic including an electrical interface . 7
Figure 2 – Signal “Sig1”: Sinusoidal wave . 10
Figure 3 – Signal “Sig2”: Rectangular wave . 11
Figure 4 – Signal “Sig3”: Symmetrical triangular wave . 11
Figure 5 – Signal “Sig4”: Trapezoidal cut wave . 11
Figure 6 – Signal “Sig5”: Upper half sine wave . 11
Figure 7 – Signal “Sig6”: Triangular align right . 11
Figure A.1 – Example of an ICD . 13
Table 1 – Examples for sources and loads . 7
Table 2 – Typical ICD specification table header . 8
Table 3 – Typical ICD file . 8
Table 4 – Source or load type “L1” . 10
Table 5 – Shape of signal “L2” . 10
Table 6 – Columns for describing the characteristics of each signal shape . 12
Table A.1 – Example for ICD data . 14
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
PROCESS MANAGEMENT FOR AVIONICS –
ELECTRONICS DESIGN –
Part 1: Electrical signal properties, naming conventions and interface
control document (ICD)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a Technical Report when it has collected
data of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC TR 63238-1, which is a Technical Report, has been prepared by IEC technical
committee 107: Process management for avionics.
The text of this Technical Report is based on the following documents:
Draft TR Report on voting
107/351/DTR 107/356/RVDTR
Full information on the voting for the approval of this Technical Report can be found in the
report on voting indicated in the above table.
– 4 – IEC TR 63238-1:2019 IEC 2019
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 63238 series, published under the general title Process
management for avionics – Electronics design, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
PROCESS MANAGEMENT FOR AVIONICS –
ELECTRONICS DESIGN –
Part 1: Electrical signal properties, naming conventions and interface
control document (ICD)
1 Scope
This part of IEC 63238 provides information and a template to create an interface control
document (ICD) for any project which includes electronic assemblies, such as electronic
circuit card assemblies (CCAs) or electronic devices, connected together. This document
proposes electrical signal naming conventions when interfacing electronic assemblies, and an
example containing seven signal naming conventions is included. This document supports
original equipment manufacturers (OEMs) in the preparation and maintenance of their
electronic assemblies interfaces and integration specifications to avoid misunderstanding of
signals which can cause unnecessary design and/or integration errors, and testing
complications.
2 Normative references
There are no normative references in this document.
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1.1
interface control document
ICD
document which defines for each electronic signal its electrical properties value and naming
Note 1 to entry Typical electronic signal examples include DC voltage, 5 V, 3,3 V.
Note 2 to entry Typical electrical property values include sine wave, rectangular wave.
3.1.2
electronic assembly
electrical or electronic device that is not subject to disassembly without destruction or
impairment of design use
EXAMPLE Electronic circuit cards or modules, displays, storage devices, printers, laptop computer, electro/optical
devices, etc.
[SOURCE: IEC TS 62239-2:2017, 3.1.20]
– 6 – IEC TR 63238-1:2019 IEC 2019
3.1.3
circuit card assembly
CCA
functional electronic product based on a printed circuit board (PCB) which supports and
connects electronic or electrical components
Note 1 to entry: Components are generally soldered onto the PCB to both electrically connect and mechanically
fasten them to it.
Note
...