|
IEC 61950
Edition 3.0 2019-09
INTERNATIONAL
STANDARD
Cable management systems –
Specifications for extra-heavy-duty electrical steel conduit fittings and
accessories
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 61950
Edition 3.0 2019-09
INTERNATIONAL
STANDARD
Cable management systems –
Specifications for extra-heavy-duty electrical steel conduit fittings and
accessories
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.120.10 ISBN 978-2-8322-7373-9
– 2 – IEC 61950:2019 © IEC 2019
CONTENTS
FOREWORD . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 General requirements . 12
4.1 Tests . 12
4.2 Metallic materials . 12
4.2.1 General . 12
4.2.2 Corrosion protection . 12
4.3 Non-metallic materials . 13
4.3.1 Flammability . 13
4.3.2 Materials for bushings and insulating liners . 13
4.3.3 Elastomeric materials . 14
4.3.4 Gasket materials. 14
4.4 Construction . 15
4.4.1 Threads for fittings and conduit bodies . 15
4.4.2 Offset and angle fittings . 15
4.5 Screws . 16
4.6 Locknuts . 16
4.6.1 Construction . 16
4.6.2 Functional requirements for fitting locknuts . 17
4.7 Classifications . 17
4.7.1 Concrete-tight type . 17
4.7.2 Wet-location type . 19
4.7.3 Expansion, expansion-deflection, deflection fitting . 20
5 Fittings for EHDERS systems . 20
5.1 Types. 20
5.2 Fittings for threaded EHDERS conduit . 20
5.2.1 End stop . 20
5.2.2 Torque test . 20
5.2.3 Earth fault . 21
5.2.4 Threaded reducers . 22
5.3 Fittings for unthreaded EHDERS conduit . 22
5.3.1 Electrical continuity and mechanical strength . 22
5.3.2 Earth fault . 23
5.3.3 Construction . 23
5.4 Bushings . 24
5.4.1 General . 24
5.4.2 Thermoplastic or thermosetting materials . 24
5.5 Service-entrance heads . 24
5.5.1 End stops for service-entrance heads . 24
5.5.2 Assembly . 24
5.5.3 Openings . 24
5.5.4 Continuity test . 25
5.5.5 Wet-location test . 25
5.6 Nipples . 25
6 Cast metal conduit bodies and covers. 25
6.1 General . 25
6.1.1 Applicability . 25
6.1.2 Openings . 25
6.2 Materials . 25
6.2.1 Wall thickness . 25
6.2.2 Coatings on metallic surfaces . 25
6.3 Integral bushings . 25
6.4 Threads . 26
6.5 Threadless connections . 26
6.6 External thread construction . 26
6.7 Wet-location type . 26
7 Conduit bodies and covers . 30
7.1 Cross-sectional area . 30
7.2 Connection to conduit . 30
7.3 Straight conduit bodies . 32
7.4 Angle conduit bodies . 32
7.5 Short conduit bodies . 33
8 Marking . 35
8.1 All fittings . 35
8.1.1 Permanence and legibility . 35
8.1.2 Manufacturer identification . 35
8.1.3 Location of marking . 35
8.1.4 Specific conditions of installation . 35
8.1.5 Specific instructions . 35
8.2 Insulating bushings or parts . 36
8.2.1 Colour coding . 36
8.2.2 Temperature rating . 36
8.2.3 Unthreaded bushings . 36
8.3 Conduit bodies . 36
8.3.1 Manufacturer identification . 36
8.3.2 Specific conditions of installation . 37
8.3.3 Short conduit bodies . 37
8.3.4 Angle conduit bodies . 37
8.3.5 Conduit bodies requiring pulling compound . 37
8.4 Fittings for threaded hubs . 37
8.5 Expansion, expansion-deflection and deflection fittings . 37
9 Type tests . 38
9.1 General . 38
9.1.1 Samples under test . 38
9.1.2 Mechanical connection . 38
9.1.3 Number of samples . 38
9.1.4 Locknuts . 38
9.1.5 Temperature . 38
9.1.6 Assembly . 38
9.2 Concrete-tightness test . 38
9.3 Wet locations test . 39
9.4 Flammability test . 42
9.5 Electrical continuity test .
...