|
IEC 60747-18-3
Edition 1.0 2019-12
INTERNATIONAL
STANDARD
colour
inside
Semiconductor devices –
Part 18-3: Semiconductor bio sensors – Fluid flow characteristics of lens-free
CMOS photonic array sensor package modules with fluidic system
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 60747-18-3
Edition 1.0 2019-12
INTERNATIONAL
STANDARD
colour
inside
Semiconductor devices –
Part 18-3: Semiconductor bio sensors – Fluid flow characteristics of lens-free
CMOS photonic array sensor package modules with fluidic system
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.080.99 ISBN 978-2-8322-7673-0
– 2 – IEC 60747-18-3:2019 © IEC 2019
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Measurement setup . 8
4.1 General . 8
4.2 Measurement system . 9
4.3 Measurement parameters of sensor . 9
4.4 Evaluation process. 10
5 Measurement and calculation at initial state flow in fluidic system . 11
5.1 General . 11
5.2 Measurement and calculation of the flow propagation characteristics . 12
5.3 Calculation of horizontal flow velocity for global shutter system . 15
5.4 Calculation of horizontal flow velocity for rolling shutter system . 17
5.5 Calculation of vertical flow velocity for rolling shutter system . 18
5.6 Criteria for quality assurance of fluidic system . 19
6 Measurement and calculation at steady-state flow in fluidic system . 19
6.1 General . 19
6.2 Measurement and calculation of all pixels at every frame . 20
6.3 Calibration of lens-free CMOS photonic array sensor package modules with
fluidic system . 20
6.3.1 General . 20
6.3.2 Calibration for planarization of non-uniform fluidic system . 20
6.3.3 Final evaluation of calibrated sensor package modules with fluidic
system . 21
7 Test report . 21
Bibliography . 22
Figure 1 – Example of lens-free CMOS photonic array sensor package modules with
fluidic system of porous media . 8
Figure 2 – Example of measurement setup for lens-free CMOS photonic array sensor
package module with fluidic system . 9
Figure 3 – Example of photoelectric measurement schematics . 9
Figure 4 – Example of measurement parameters of sensor . 10
Figure 5 – Evaluation process of fluid flow characteristics of lens-free CMOS photonic
array sensor package modules with fluidic system . 11
Figure 6 – Example of frame capture performed at every frame . 13
Figure 7 – Flow propagation profile in the early stage of the initial state flow . 13
Figure 8 – Flow propagation profile in the intermediate stage of the initial state flow . 14
Figure 9 – Flow propagation profile in the final stage of the initial state flow . 15
Figure 10 – Example of exposure and horizontal flow in global shutter system . 16
Figure 11 – Example of exposure and horizontal flow in horizontal rolling shutter
system . 17
Figure 12 – Example of exposure and vertical flow in vertical rolling shutter system . 18
Figure 13 – Example on box plot of column pixels at every frame from sensor output
values of all pixel arrays . 20
Figure 14 – Example on boxplot of all pixels at every frame from sensor output values
of all pixel arrays . 20
– 4 – IEC 60747-18-3:2019 © IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SEMICONDUCTOR DEVICES –
Part 18-3: Semiconductor bio sensors – Fluid flow characteristics
of lens-free CMOS photonic array sensor package modules
with fluidic system
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60747-18-3 has been prepared by subcommittee 47E: Discrete
semiconductor devices, of IEC technical committee 47: Semiconductor devices.
The text of this International Standard is based on the following documents:
FDIS Report on voting
47E/682/FDIS 47E/690/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 60747 series, published under the general title Semiconductor
devices, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
– 6 – IEC 60747-18-3:2019 © IEC 2019
INTRODUCTION
The IEC 60747-18 series on semiconductor bio sensors is composed of the following parts:
• IEC 60747-18-1 defines the test method and data analysis for calibration of lens-free
CMOS photonic array sensors
• IEC 60747-18-2 defines the evaluation process of lens-free CMOS photonic array sensor
package modules
• IEC 60747-18-3 defines the fluid flow characteristics of lens-free CMOS photonic array
sensor package modules with fluidic system
The IEC 60747-18 series includes subjects such as noise analysis, long-term reliability tests,
test methods for lens-free CMOS photonic array sensor package modules under patchable
environments, test methods under implantable environments, etc.
The International Electrotechnical Commission (IEC) draws attention to the fact that it is
claimed that
...