|
IEC 60747-5-11
Edition 1.0 2019-12
INTERNATIONAL
STANDARD
colour
inside
Semiconductor devices –
Part 5-11: Optoelectronic devices – Light emitting diodes – Test method of
radiative and nonradiative currents of light emitting diodes
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 60747-5-11
Edition 1.0 2019-12
INTERNATIONAL
STANDARD
colour
inside
Semiconductor devices –
Part 5-11: Optoelectronic devices – Light emitting diodes – Test method of
radiative and nonradiative currents of light emitting diodes
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.080.99 ISBN 978-2-8322-7657-0
– 2 – IEC 60747-5-11:2019 © IEC:2019
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions and abbreviated terms . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms . 6
4 Measuring methods . 7
4.1 Basic requirements . 7
4.1.1 Measuring conditions . 7
4.1.2 Measuring instruments and equipment . 7
4.2 Radiative current (I ) measurement . 7
rad
4.2.1 Purpose . 7
4.2.2 Measurement procedure . 7
4.3 Nonradiative current (I ) measurement . 7
nonrad
4.3.1 Purpose . 7
4.3.2 Measurement procedure . 7
4.4 Measurement sequence . 8
5 Test report . 8
Annex A (informative) Test example. 9
Annex B (informative) Background information . 12
Bibliography . 13
Figure 1 – Sequence of the radiative and nonradiative current measurements . 8
Figure A.1 – IQE and forward voltage as a function of forward current . 9
Figure A.2 – Radiative current and forward voltage as a function of forward current . 10
Figure A.3 – Nonradiative current and forward voltage as a function of forward current . 10
Figure A.4 – Total forward current, radiative current, and nonradiative current plotted
as a function of forward voltage . 11
Table A.1 – Summary of test report . 11
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SEMICONDUCTOR DEVICES –
Part 5-11: Optoelectronic devices – Light emitting diodes –
Test method of radiative and nonradiative currents
of light emitting diodes
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60747-5-11 has been prepared by subcommittee 47E: Discrete
semiconductor devices, of IEC technical committee 47: Semiconductor devices.
The text of this International Standard is based on the following documents:
CDV Report on voting
47E/653/CDV 47E/678/RVC
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
– 4 – IEC 60747-5-11:2019 © IEC:2019
A list of all parts in the IEC 60747 series, published under the general title Semiconductor
devices, can be found on the IEC website.
Future standards in this series will carry the new general title as cited above. Titles of existing
standards in this series will be updated at the time of the next edition.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
SEMICONDUCTOR DEVICES –
Part 5-11: Optoelectronic devices – Light emitting diodes –
Test method of radiative and nonradiative currents
of light emitting diodes
1 Scope
This part of IEC 60747 specifies the measuring methods of radiative and nonradiative currents
of single light emitting diode (LED) chips or packages without phosphor. White LEDs for
lighting applications are out of the scope of this document. This document utilizes the internal
quantum efficiency (IQE) as a function of current, whose measurement methods are
discussed in other documents.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document (including
any amendments) applies.
IEC 60747-5-6:2016, Semiconductor devices – Part 5-6: Optoelectronic devices – Light
emitting diodes
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1.1
internal quantum efficiency
η
IQE
ratio of the number of photons emitted from the active region per unit time to the number of
electrons injected into the LED per unit time
Φ hν
e,active
η =
IQE
Iq
F
where
Φ is the radiant power emitted from the active region
e,active
hν is the mean photon energy
I is the forward current
F
q is the elementary charge
[SOURCE: IEC 60747-5-8:2019, 3.2.4]
– 6 – IEC 60747-5-11:2019 © IEC:2019
3.1.2
radiative current
I
rad
current that is consumed by the radiative recombination process in the LED
3.1.3
nonradiative current
I
nonrad
current that is consumed by the nonradiative processes in the LED
Note 1 to entry: The nonradiative processes in the LED include the nonradiative recombination in the active
region and the carrier leakage outside the active region.
Note 2 to entry: The total forward current I supplied to the LED can be decomposed into radiative and
F
nonradiative currents:
II+ I .
F rad nonrad
Using the radiative and nonradiative currents, the IQE can be re-expressed as follows:
II
rad rad
η .
IQE
I II+
F rad nonrad
Using the above relations, the radiative and nonradiative currents can be expressed as follows:
I =ηI ;
rad IQE F
I =II−=(1−η )I .
nonrad F rad IQE F
Electrical power consumed by the radiative process (P ) in the LED can be expressed as follows:
rad
P IV η IV
rad rad F IQE
...