|
IEC 62680-1-2
Edition 4.0 2019-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Universal serial bus interfaces for data and power
Part 1-2: Common components – USB Power Delivery specification
Interfaces de bus universel en série pour les données et l'alimentation électrique
Partie 1-2: Composants communs – Spécification de l'alimentation électrique
par port USB
IEC, or USB-IF at the respective address given below. Any questions about USB-IF copyright should be addressed to
the USB-IF. Enquiries about obtaining additional rights to this publication and other information requests should be
addressed to t he IEC or your local IEC member National Committee.
IEC Central Office USB Implementers Forum, Inc.
3, rue de Varembé 3855 S.W. 153rd Drive
CH-1211 Geneva 20 Beaverton, OR 97003
Switzerland United States of America
Tel.: +41 22 919 02 11 Tel. +1 503-619-0426
[email protected] [email protected]
www.usb.org
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 62680-1-2
Edition 4.0 2019-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Universal serial bus interfaces for data and power
Part 1-2: Common components – USB Power Delivery specification
Interfaces de bus universel en série pour les données et l'alimentation électrique
Partie 1-2: Composants communs – Spécification de l'alimentation électrique
par port USB
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.220; 33.120; 35.200 ISBN 978-2-8322-7646-4
– 2 – IEC 62680-1-2:2019
© USB IF:2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER
Part 1-2: Common components – USB Power Delivery specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition
to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly
Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted
to technical committees; any IEC National Committee interested in the subject dealt with may participate in this
preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate
in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance
with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC
National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees
in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate,
IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently
to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication
and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services
carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members
of its technical committees and IEC National Committees for any personal injury, property damage or other damage of
any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the
publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.
IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62680-1-2 has been prepared by technical area 18: Multimedia home
systems and applications for end-user networks, of IEC technical committee 100: Audio, video and
multimedia systems and equipment.
The text of this standard was prepared by the USB Implementers Forum (USB-IF). The structure and
editorial rules used in this publication reflect the practice of the organization which submitted it.
The text of this International Standard is based on the following documents:
CDV Report on voting
100/3189/CDV 100/3251/RVC
Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
© USB IF:2018
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
– 4 – IEC 62680-1-2:2019
© USB IF:2018
INTRODUCTION
The IEC 62680 series is based on a series of specifications that were originally developed by the
USB Implementers Forum (USB-IF). These specifications were submitted to the IEC under the
auspices of a special agreement between the IEC and the USB-IF.
This standard is the USB-IF publication Universal Serial Bus Power Delivery Specification Revision
3.0, Version 1.2.
The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of
companies that developed the Universal Serial Bus specification. The USB-IF was formed to provide
a support organization and forum for the advancement and adoption of Universal Serial Bus
technology. The Forum facilitates the development of high-quality compatible USB peripherals
(devices), and promotes the benefits of USB and the quality of products that have passed
compliance testing.
ANY USB SPECIFICATIONS ARE PROVIDED TO YOU "AS IS", WITH NO WARRANTIES
WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT,
OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE
AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY
FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR
IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON.
THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY
LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL
PROPERTY RIGHTS.
Entering into USB Adopters Agreements may, however, allow a signing company to participate in a
reciprocal, RAND-Z licensing arrangement for compliant products. For more information, please see:
https://www.usb.org/documents
IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER
INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB IMPLEMENTERS
FORUM.”
© USB IF:2018
Universal Serial Bus
Power Delivery Specification
Revision: 3.0
Version: 1.2
Release date: 21 June 2018
– 6 – IEC 62680-1-2:2019
© USB IF:2018
LIMITED COPYRIGHT LICENSE
THE USB 3.0 PROMOTERS GRANT A CONDITIONAL COPYRIGHT LICENSE UNDER THE
COPYRIGHTS EMBODIED IN THE USB POWER DELIVERY SPECIFICATION TO USE AND
REPRODUCE THE SPECIFICATION FOR THE SOLE PURPOSE OF, AND SOLELY TO THE EXTENT
NECESSARY FOR, EVALUATING WHETHER TO IMPLEMENT THE SPECIFICATION IN PRODUCTS
THAT WOULD COMPLY WITH THE SPECIFICATION. WITHOUT LIMITING THE FOREGOING, USE
THE OF SPECIFICATION FOR THE PURPOSE OF FILING OR MODIFYING ANY PATENT
APPLICATION TO TARGET THE SPECIFICATION OR USB COMPLIANT PRODUCTS IS NOT
AUTHORIZED. EXCEPT FOR THIS EXPRESS COPYRIGHT LICENSE, NO OTHER RIGHTS OR
LICENSES ARE GRANTED, INCLUDING WITHOUT LIMITATION ANY PATENT LICENSES. IN ORDER
TO OBTAIN ANY ADDITIONALY INTELLECTUAL PROPERTY LICENSES OR LICENSING
COMMITMENTS ASSOCIATED WITH THE SPECIFICATION A PARTY MUST EXECUTE THE USB 3.0
ADOPTERS AGREEMENT. NOTE: BY USING THE SPECIFICATION, YOU ACCEPT THESE LICENSE
TERMS ON YOUR OWN BEHALF AND, IN THE CASE WHERE YOU ARE DOING THIS AS AN
EMPLOYEE, ON BEHALF OF YOUR EMPLOYER.
INTELLECTUAL PROPERTY DISCLAIMER
THIS SPECIFICATION IS PROVIDED TO YOU “AS IS” WITH NO WARRANTIES WHATSOEVER,
INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR
ANY PARTICULAR PURPOSE. THE AUTHORS OF THIS SPECIFICATION DISCLAIM ALL LIABILITY,
INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE
OR IMPLEMENTATION OF INFORMATION IN THIS SPECIFICATION. THE PROVISION OF THIS
SPECIFICATION TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY
ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS.
Please send comments via electronic mail to [email protected]
For industry information, refer to the USB Implementers Forum web page at
http://www.usb.org
All product names are trademarks, registered trademarks, or service marks of their respective
owners.
Corporation, Microsoft Corporation, Renesas, STMicroelectronics, and Texas Instruments.
All rights reserved.
© USB IF:2018
Chairs
Alvin Cox Cabling Sub-Chair
Bob Dunstan Specification Chair/Protocol Subgroup Chair
Deric Waters PHY Chair
Ed Berrios Power Supply Chair
Rahman Ismail System Policy Chair
Richard Petrie Specification Chair/Device Policy Chair
Editors
Bob Dunstan
Richard Petrie
Contributors
– 8 – IEC 62680-1-2:2019
© USB IF:2018
Charles Wang ACON, Advanced-Connectek, Inc. Sathish Kumar Cadence Design Systems, Inc.
Ganesan
Conrad Choy ACON, Advanced-Connectek, Inc.
Alessandro Canova Tech
Dennis Chuang ACON, Advanced-Connectek, Inc.
Ingrassia
Steve Sedio ACON, Advanced-Connectek, Inc.
Andrea Colognese Canova Tech
Sunney Yang ACON, Advanced-Connectek, Inc.
Antonio Orzelli Canova Tech
Vicky Chuang ACON, Advanced-Connectek, Inc.
Davide Ghedin Canova Tech
Joseph Scanlon Advanced Micro Devices
Matteo Casalin Canova Tech
Caspar Lin Allion Labs, Inc.
Michael Marioli Canova Tech
Casper Lee Allion Labs, Inc.
Nicola Canova Tech
Danny Shih Allion Labs, Inc.
Scantamburlo
Howard Chang Allion Labs, Inc.
Paolo Pilla Canova Tech
Greg Stewart Analogix Semiconductor, Inc.
Yi-Feng Lin Canyon Semiconductor
Mehran Badii Analogix Semiconductor, Inc.
YuHung Lin Canyon Semiconductor
Alexei Kosut Apple
David Tsai Chrontel, Inc.
Bill Cornelius Apple
Anshul Gulati Cypress Semiconductor
Carlos Colderon Apple
Anup Nayak Cypress Semiconductor
Chris Uiterwijk Apple
Benjamin Kropf Cypress Semicond
...