|
IEC 60092-354
Edition 4.0 2020-02
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Electrical installations in ships –
Part 354: Single- and three-core power cables with extruded solid insulation for
rated voltages 6 kV (U = 7,2 kV) up to 30 kV (U = 36 kV)
m m
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 60092-354
Edition 4.0 2020-02
REDLINE VERSION
INTERNATIONAL
STANDARD
colour
inside
Electrical installations in ships –
Part 354: Single- and three-core power cables with extruded solid insulation for
rated voltages 6 kV (U = 7,2 kV) up to 30 kV (U = 36 kV)
m m
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.060.20; 47.020.60 ISBN 978-2-8322-7863-5
– 2 – IEC 60092-354:2020 RLV © IEC 2020
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 General requirements . 7
4.1 Rated voltage . 7
4.2 Markings . 7
4.2.1 Indication of origin and voltage identification . 8
4.2.2 Continuity of marking . 8
4.2.3 Core identification for three-cores . 8
5 Constructional requirements . 8
5.1 General cable description . 8
5.1.1 Overview . 8
5.1.2 Armoured single-sheathed cable with outer sheath only . 8
5.1.3 Armoured double-sheathed cable with inner and outer sheath . 8
5.1.4 Armoured single-sheathed cable with inner sheath only . 9
5.1.5 Unarmoured single-sheathed cable . 9
5.2 Conductors . 9
5.3 Insulation . 10
5.3.1 Material . 10
5.3.2 Application . 10
5.3.3 Thickness of insulation . 10
5.4 Screening of cores . 10
5.4.1 General . 10
5.4.2 Conductor screening . 10
5.4.3 Insulation screening . 11
5.5 Metallic screen . 11
5.5.1 Construction . 11
5.5.2 Requirements . 11
5.6 Assembly of three-core cables, inner coverings and fillers . 11
5.7 Inner covering . 11
5.7.1 General . 11
5.7.2 Thickness of inner covering . 11
5.8 Inner sheath . 12
5.8.1 Material . 12
5.8.2 Application . 12
5.8.3 Thickness of inner sheath . 12
5.9 Braid armour . 12
5.9.1 General . 12
5.9.2 Braid wire armour . 13
5.9.3 Braid wire diameter . 13
5.10 Outer sheath . 13
5.10.1 Material . 13
5.10.2 Application . 13
5.10.3 Thickness of outer sheath . 13
5.10.4 Colour of outer sheath . 14
6 Tests – Methods and requirements . 14
Annex A (informative normative) Electrical tests after installation . 17
Bibliography . 18
Table 1 – Insulation thickness . 10
Table 2 – Thickness of extruded inner covering for calculation of fictious diameters . 12
Table 3 –Tests applicable to all cables . 14
Table 4 – Additional tests for halogen-free cables . 16
Table 5 – Additional test for low smoke cables . 16
Table 6 – Additional tests when required. 16
– 4 – IEC 60092-354:2020 RLV © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL INSTALLATIONS IN SHIPS –
Part 354: Single- and three-core power cables
with extruded solid insulation for rated voltages
6 kV (U = 7,2 kV) up to 30 kV (U = 36 kV)
m m
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
This redline version of the official IEC Standard allows the user to identify the changes
made to the previous edition. A vertical bar appears in the margin wherever a change
has been made. Additions are in green text, deletions are in strikethrough red text.
International Standard IEC 60092-354 has been prepared by subcommittee 18A: Electric
cables for ships and mobile and fixed offshore units, of IEC technical committee 18: Electrical
installations of ships and of mobile and fixed offshore units.
This fourth edition cancels and replaces the third edition published in 2014. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) Editorial adaptations have been made.
The text of this International Standard is based on the following documents:
CDV Report on voting
18A/419/CDV 18A/424/RVC
Fu
...