|
IEC TS 63164-1
Edition 1.0 2020-02
TECHNICAL
SPECIFICATION
colour
inside
Reliability of industrial automation devices and systems –
Part 1: Assurance of automation devices reliability data and specification
of their source
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC TS 63164-1
Edition 1.0 2020-02
TECHNICAL
SPECIFICATION
colour
inside
Reliability of industrial automation devices and systems –
Part 1: Assurance of automation devices reliability data and specification
of their source
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040 ISBN 978-2-8322-7809-3
– 2 – IEC TS 63164-1:2020 IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, symbols and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 10
4 Form to present reliability data . 10
5 Conformance . 10
6 Requirements on the assurance of reliability data . 10
6.1 Assurance of reliability data derived from calculation . 10
6.1.1 General requirements . 10
6.1.2 Method based on calculation . 11
6.1.3 Data information . 11
6.2 Assurance of reliability data derived from observations of devices in the field . 11
6.2.1 General requirements . 11
6.2.2 Method based on observations of devices in the field . 11
6.2.3 Data information . 11
6.3 Assurance of reliability data derived from laboratory tests . 12
6.3.1 General requirements . 12
6.3.2 Method based on durability test results . 12
6.3.3 Data information . 12
Annex A (informative) Methods to collect reliability data from the field . 13
A.1 General . 13
A.2 Objectives of reliability data collection . 13
A.3 Specification of the type of data collected . 14
A.4 Data sources . 15
A.5 Analysis methods and their required data . 15
A.6 Planning . 16
A.7 Approaches to data collection . 16
A.8 Methods of condition monitoring and required resources . 16
Annex B (informative) Calculation of MTTF and MTBF derived from λ for a device or
subsystem . 17
B.1 General . 17
B.2 Determination of the failure rate λ under operating conditions . 17
B.3 Determination of MTBF . 17
B.4 Example of electronic circuit . 18
Annex C (informative) Differentiation between systematic failure and random hardware
failure . 20
C.1 General . 20
C.2 Criteria for failure classification . 20
C.3 Examples . 22
C.3.1 Fatigue . 22
C.3.2 Installation fault . 22
Bibliography . 24
Figure A.1 – Exemplary definition of automation device . 14
Figure B.1 – Example of electronic circuit . 18
Figure C.1 – Example of fatigue . 22
Figure C.2 – Example of installation fault . 23
Table A.1 – Data requirements for dependability methods, why they should be used,
and IEC reference . 16
Table C.1 – Classification of failures by cause . 20
Table C.2 – Classification of failures by phenomenon . 21
Table C.3 – Example for failure collection and evaluation . 21
– 4 – IEC TS 63164-1:2020 IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RELIABILITY OF INDUSTRIAL AUTOMATION
DEVICES AND SYSTEMS –
Part 1: Assurance of automation devices
reliability data and specification of their source
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. In
exceptional circumstances, a technical committee may propose the publication of a Technical
Specification when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development or where, for any other reason, there is the
future but no immediate possibility of an agreement on an International Standard.
Technical Specifications are subject to review within three years of publication to decide
whether they can be transformed into International Standards.
Technical Specification IEC TS 63164-1 has been prepared by IEC technical committee 65:
Industrial-process measurement, control and automation.
The text of this technical specification is based on the following documents:
DTS Report on voting
65/744/DTS 65/767/RVDTS
Full information on the voting for the approval of this technical specification can be found in
the report on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts of the IEC 63164 series, published under the general title, Reliability of
industrial automation devices and sy
...