|
IEC 62505-3-2
Edition 2.0 2020-03
INTERNATIONAL
STANDARD
Railway applications – Fixed installations – Particular requirements for AC
switchgear –
Part 3-2: Measurement, control and protection devices for specific use in AC
traction systems – Current transformers
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC 62505-3-2
Edition 2.0 2020-03
INTERNATIONAL
STANDARD
Railway applications – Fixed installations – Particular requirements for AC
switchgear –
Part 3-2: Measurement, control and protection devices for specific use in AC
traction systems – Current transformers
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 45.060.01 ISBN 978-2-8322-7851-2
– 2 – IEC 62505-3-2:2020 © IEC 2020
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms . 8
4 Service conditions . 8
5 Rating. 8
5.1 General . 8
5.2 Nominal voltage (U ) . 8
n
5.3 Rated voltage (U ) . 9
Ne
5.4 Insulation coordination . 9
5.4.1 General . 9
5.4.2 Rated insulation level . 9
5.5 Rated frequency . 10
5.6 Rated accuracy classes . 10
6 Design and construction . 11
6.1 General . 11
6.2 Transformer construction . 11
6.3 Requirements for the external insulation . 11
6.4 Electromagnetic compatibility (EMC) . 11
6.5 Nameplates. 11
7 Tests . 11
7.1 General . 11
7.2 Electromagnetic compatibility tests (EMC) . 12
7.3 Partial discharge test . 12
8 Rules for transport, storage, erection, operation and maintenance . 12
9 Safety . 12
10 Influence of the product on the environment . 12
11 Information to be given with enquiries, tenders and orders . 12
Bibliography . 13
Table 1 – Nominal voltages (U ), rated voltages (U ), rated impulse voltages (U )
n Ne Ni
and power-frequency withstand voltages (U ) for circuits connected to the contact line . 10
d
Table 2 – Partial discharge test voltages and permissible levels . 12
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RAILWAY APPLICATIONS – FIXED INSTALLATIONS –
PARTICULAR REQUIREMENTS FOR AC SWITCHGEAR –
Part 3-2: Measurement, control and protection devices for
specific use in AC traction systems – Current transformers
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62505-3-2 has been prepared by IEC technical committee 9:
Electrical equipment and systems for railways.
This second edition cancels and replaces the first edition published in 2009. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
– this standard was revised to reflect the latest versions of standards referenced and to
remove text already included in the IEC 61869 series.
– the structure of the document was adapted to that of IEC 62505-1 and IEC 62505-2.
– ratings have been added to provide designations in line with other railway standards, for
example IEC 62497.
– 4 – IEC 62505-3-2:2020 © IEC 2020
– test requirements have been detailed to meet operating conditions of railway applications.
– partial discharge voltages have been specified in Table 2.
The text of this International Standard is based on the following documents:
FDIS Report on voting
9/2564/FDIS 9/2576/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
This standard is to be read in conjunction with IEC 61869-1:2007 and IEC 61869-2:2012 (see
Introduction).
A list of all parts in the IEC 62505 series, published under the general title Railway
applications – Fixed installations – Particular requirements for AC switchgear, can be found
on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
INTRODUCTION
Where a particular clause/subclause of IEC 61869-2 is not mentioned in this standard, that
clause/subclause applies as far as reasonable. Where requirements relate exclusively to
three-phase systems or to voltages outside those in use in traction systems, they are not
applicable. Where this standard states “addition” or “replacement”, the relevant text of
IEC 61869-2 is to be adapted accordingly.
The numbering of clauses in the IEC 61869 series is similar to that in the IEC 62505 series.
Where terms defined in IEC 61869-1 and IEC 61869-2 conflict with definitions of the same
terms as given in IEC 60050-811:2017 or of the other railway applications documents listed in
the normative references, the definitions in IEC 61869-1 and IEC 61869-2 are to be used.
NOTE The suffix N which appears in this document for rated values is not present in IEC 61869-1 and
IEC 61869-2.
References in subclauses of IEC 61869-1 and IEC 61869-2 have to be replaced by references
to applicable subclauses in this document as far as reasonably possible.
– 6 – IEC 62505-3-2:2020 © IEC 2020
RAILWAY APPLICATIONS – FIXED INSTALLATIONS –
PARTICULAR REQUIREMENTS FOR AC SWITCHGEAR –
Part 3-2: Measurement, control and protection devices for
specific use in AC tr
...