IEC 60034-2-3:2020

Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors

IEC 60034-2-3:2020

Name:IEC 60034-2-3:2020   Standard name:Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors
Standard number:IEC 60034-2-3:2020   language:English and French language
Release Date:18-Mar-2020   technical committee:TC 2 - Rotating machinery
Drafting committee:WG 28 - TC 2/WG 28   ICS number:01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION

IEC 60034-2-3
Edition 1.0 2020-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Rotating electrical machines –
Part 2-3: Specific test methods for determining losses and efficiency of
converter-fed AC motors
Machines électriques tournantes –
Partie 2-3: Méthodes d'essai spécifiques pour la détermination des pertes
et du rendement des moteurs à courant alternatif alimentés par convertisseur





your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.

IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et Définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues depuis 2002. Plus certaines entrées
antérieures extraites des publications des CE 37, 77, 86 et
Service Clients - webstore.iec.ch/csc CISPR de l'IEC.

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[email protected] .
IEC 60034-2-3
Edition 1.0 2020-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Rotating electrical machines –

Part 2-3: Specific test methods for determining losses and efficiency of

converter-fed AC motors
Machines électriques tournantes –

Partie 2-3: Méthodes d'essai spécifiques pour la détermination des pertes

et du rendement des moteurs à courant alternatif alimentés par convertisseur

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.160.01 ISBN 978-2-8322-7842-0

– 2 – IEC 60034-2-3:2020 © IEC 2020
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 Symbols and abbreviated terms . 9
5 Basic requirements . 10
5.1 Instrumentation . 10
5.1.1 General . 10
5.1.2 Power analyser and transducers . 10
5.1.3 Mechanical output of the motor . 11
5.2 Converter set-up . 11
5.2.1 General . 11
5.2.2 Comparable converter set-up for rated voltages up to 1 kV . 11
5.2.3 Testing with converters with rated voltages above 1 kV . 12
5.2.4 Testing with other converters . 12
6 Test method for the determination of the efficiency of converter-fed motors . 12
6.1 Selection of determination method . 12
6.2 Method 2-3-A – Direct measurement of input and output . 13
6.2.1 Test set-up . 13
6.2.2 Test procedure . 13
6.2.3 Efficiency determination. 13
6.2.4 Measurement at seven standardized operating points . 14
6.3 Method 2-3-B – Summation of losses with determination of additional high
frequency loss at converter supply at no-load operation . 14
6.3.1 General . 14
6.3.2 Test set-up . 14
6.3.3 Test procedure . 14
6.3.4 Efficiency determination. 15
6.4 2-3-C – Alternate Efficiency Determination Method (AEDM) . 15
6.5 2-3-D – Determination of efficiency by calculation . 15
7 Interpolation of losses at any operating point . 16
7.1 General . 16
7.2 Interpolation procedure . 16
7.3 Analytical determination of relative losses at any operating point . 16
7.4 Additional losses due to frequency converter voltage drop . 18
7.5 Alternate operating points to determine interpolation coefficients . 18
7.6 Optional determination of interpolation error . 19
Annex A (informative) Losses of AC motors . 21
A.1 General . 21
A.2 Stator and rotor winding I R losses P (P + P ) . 21
LSR LS LR
A.3 Iron losses (P ) . 21
Lfe
A.4 Additional load losses (P ) . 22
LL
A.5 Friction and windage losses (P ) . 22
Lfw
A.6 Additional high frequency losses (P ) . 23
LHL
Annex B (informative) Exemplary determination of losses and efficiency at various
load points . 24
B.1 General . 24
B.2 Determination of the interpolation coefficients . 24
B.3 Calculation of losses and efficiency for certain operating points . 25
Bibliography . 27

Figure 1 – Standardized operating points . 17

Table 1 – Preferred test methods . 12
Table 2 – Other test methods . 13
Table 3 – Normative operating points . 17
Table 4 – Non-normative alternate operating points . 19
Table A.1 – Recommended split of windage and friction losses for IC 411 self-
ventilated motors . 22
Table B.1 – Name plate data . 24
Table B.2 – Reference values . 24
Table B.3 – Losses for the 7 operating points . 25
Table B.4 – Interpolation coefficients . 25
Table B.5 – User-defined operating points . 26
Table B.6 – Calculated losses for the user-defined operating points . 26

– 4 – IEC 60034-2-3:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ROTATING ELECTRICAL MACHINES –

Part 2-3: Specific test methods for determining losses and
efficiency of converter-fed AC motors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27