|
IEC TS 62196-3-1
Edition 1.0 2020-03
TECHNICAL
SPECIFICATION
colour
inside
Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive
charging of electric vehicles –
Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging
intended to be used with a thermal management system
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC TS 62196-3-1
Edition 1.0 2020-03
TECHNICAL
SPECIFICATION
colour
inside
Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive
charging of electric vehicles –
Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging
intended to be used with a thermal management system
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.120.30; 43.120 ISBN 978-2-8322-8022-5
– 2 – IEC TS 62196-3-1:2020 © IEC 2020
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 General . 10
5 Ratings . 18
6 Connection between the power supply and the electric vehicle . 19
7 Classification of accessories . 20
8 Marking . 21
9 Dimensions. 21
10 Protection against electric shock . 21
11 Size and colour of protective earthing conductors . 21
12 Provision for protective earthing . 22
13 Terminals . 22
14 Interlocks . 22
15 Resistance to ageing of rubber and thermoplastic material . 22
16 General construction . 22
17 Construction of socket-outlets . 25
18 Construction of plugs and vehicle connectors . 25
19 Construction of vehicle inlets . 26
20 Degrees of protection . 26
21 Insulation resistance and dielectric strength . 26
22 Breaking capacity . 26
23 Normal operation . 26
24 Temperature rise . 26
25 Flexible cables and their connection . 31
26 Mechanical strength . 32
27 Screws, current-carrying parts and connections . 33
28 Creepage distances, clearances and distances . 33
29 Resistance to heat, to fire and to tracking . 33
30 Corrosion and resistance to rusting . 33
31 Conditional short-circuit current withstand test . 33
32 Electromagnetic compatibility . 33
33 Vehicle driveover . 33
101 Liquid coolants . 34
Annex A (normative) Specific information for configuration AA . 36
Annex B (informative) Specific information for configuration BB . 44
Annex C (normative) Specific information for configuration EE . 45
Annex D (normative) Specific information for configuration FF . 53
Annex E (informative) Recommended data . 61
Bibliography . 62
Figure 101 – DC EV supply equipment with thermal sensing . 17
Figure 102 – DC EV supply equipment with thermal sensing, thermal transport and
thermal exchange . 18
Figure A.1 – Reference device AA_0 . 36
Figure A.2 – Test setup AA_0 . 37
Figure A.3 – Test setup AA_1 . 38
Figure A.4 – Test setup AA_2 . 39
Figure A.5 – Reference device AA_1 . 39
Figure A.6 – Test setup AA_3 . 40
Figure A.7 – Reference device AA_2 . 41
Figure A.8 – Test setup AA_4 . 42
Figure A.9 – General test setup for temperature rise tests and thermal sensing device
tests (configuration AA) . 42
Figure A.10 – Plating of contacts for configuration AA . 43
Figure C.1 – Reference device EE_0 . 46
Figure C.2 – Test setup EE_0 . 47
Figure C.3 – Test setup EE_1 . 47
Figure C.4 – Test setup EE_2 . 48
Figure C.5 – Reference device EE_1 . 48
Figure C.6 – Test setup EE_3 . 49
Figure C.7 – Reference device EE_2 . 49
Figure C.8 – Test setup EE_4 . 50
Figure C.9 – General test setup for temperature rise tests and thermal sensing device
tests (configuration EE) . 50
Figure C.10 – Plating of contacts for configuration EE . 52
Figure D.1 – Reference device FF_0 . 54
Figure D.2 – Test setup FF_0 . 55
Figure D.3 – Test setup FF_1 . 55
Figure D.4 – Test setup FF_2 . 56
Figure D.5 – Reference device FF_1 . 57
Figure D.6 – Test setup FF_3 . 57
Figure D.7 – Reference device FF_2 . 58
Figure D.8 – Test setup FF_4 . 58
Figure D.9 – General test setup for temperature rise tests and thermal sensing device
tests (configuration FF) . 59
Figure D.10 – Plating of contacts for configuration FF . 60
Table 101 – Overview of applicable tests for different classifications of accessories . 11
Table 102 – Test sequence A . 15
Table 103 – Test sequence B . 15
Table 104 – Test sequence C . 16
Table 105 – Test sequence D . 16
Table 106 – Overview of the DC vehicle interface . 19
Table 107 – Overview of the combined AC/DC vehicle interface . 20
– 4 – IEC TS 62196-3-1:2020 © IEC 2020
Table 108 – Interface overview . 21
Table 109 – Short-time test currents . 22
Table 110 – Properties of DC accessory contact plating for pin . 25
Table 111 – Normal operation . 26
Table 112 – Pull for
...