|
IEC 60730-2-9
Edition 4.0 2020-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2
Automatic electrical controls –
Part 2-9: Particular requirements for temperature sensing controls
Dispositifs de commande électrique automatiques –
Partie 2-9: Exigences particulières pour les dispositifs de commande
thermosensibles
IEC 60730-2-9:2015-05/AMD2:2020-04(en-fr)
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and definitions clause of
IEC publications issued between 2002 and 2015. Some
IEC Customer Service Centre - webstore.iec.ch/csc entries have been collected from earlier publications of IEC
If you wish to give us your feedback on this publication or TC 37, 77, 86 and CISPR.
need further assistance, please contact the Customer Service
.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Electropedia - www.electropedia.org
webstore.iec.ch/advsearchform Le premier dictionnaire d'électrotechnologie en ligne au
La recherche avancée permet de trouver des publications IEC monde, avec plus de 22 000 articles terminologiques en
en utilisant différents critères (numéro de référence, texte, anglais et en français, ainsi que les termes équivalents dans
comité d’études,…). Elle donne aussi des informations sur les 16 langues additionnelles. Egalement appelé Vocabulaire
projets et les publications remplacées ou retirées. Electrotechnique International (IEV) en ligne.
IEC Just Published - webstore.iec.ch/justpublished Glossaire IEC - std.iec.ch/glossary
Restez informé sur les nouvelles publications IEC. Just 67 000 entrées terminologiques électrotechniques, en anglais
Published détaille les nouvelles publications parues. et en français, extraites des articles Termes et définitions des
Disponible en ligne et une fois par mois par email. publications IEC parues entre 2002 et 2015. Plus certaines
entrées antérieures extraites des publications des CE 37, 77,
Service Clients - webstore.iec.ch/csc 86 et CISPR de l'IEC.
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[email protected] .
IEC 60730-2-9
Edition 4.0 2020-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 2
AM ENDEMENT 2
Automatic electrical controls –
Part 2-9: Particular requirements for temperature sensing controls
Dispositifs de commande électrique automatiques –
Partie 2-9: Exigences particulières pour les dispositifs de commande
thermosensibles
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 97.120 ISBN 978-2-8322-8066-9
– 2 – IEC 60730-2-9:2015/AMD2:2020
© IEC 2020
FOREWORD
This amendment has been prepared by IEC technical committee 72: Automatic electrical
controls.
The text of this amendment is based on the following documents:
FDIS Report on voting
72/1225/FDIS 72/1236/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
11.4 Actions
Add the following new subclauses:
11.4.11 Type 1.H or 2.H action
Additional subclauses:
11.4.11.101 For this test, the reset mechanism of the control will be held in the reset position
for the duration of the test from 11.4.11.102 to 11.4.11.104. The verification of the automatic
non-resetting above –35 °C will be carried out by 11.4.11.105 to 11.4.11.106. For SOD, the
verification of the automatic non-resetting above either +0 °C or –35 °C will be carried out by
11.4.11.105 to 11.4.11.106, as declared in item 103 of Table 1.
11.4.11.102 With the reset mechanism held in the reset position at room temperature,
continuity across contacts is observed by a low-energy circuit, 0,05 A maximum.
11.4.11.103 The control’s sensing element is then installed in an air circulating chamber or
an oil bath and the control’s switch head is installed as in 14.5.1. When the whole control is
declared as the sensing element, the whole control is placed in an air-circulating chamber.
The control or the control’s sensing element is adjusted for the maximum set point
temperature. The chamber or oil bath temperature shall be determined by positioning a
thermocouple wire adjacent to the control under test. The chamber or oil bath temperature is
then raised from room temperature and held at approximately 10 K below the set point until
temperatures stabilize. The chamber or oil bath temperature is then raised at a rate of not more
than 0,5 K per minute until the contact operates. Indication of contact separation is observed
by applying the method of 11.4.11.102.
IEC 60730-2-9:2015/AMD2:20 – 3 –
© IEC 2020
11.4.11.104 After the control has operated and with the reset mechanism still held in the reset
position, the temperature of the chamber or oil bath is then reduced to determine if the control
automatically resets. Verification of contact closure is done by applying the method in
11.4.11.102.
11.4.11.105 The whole control or the control’s sensing element is then installed in an air
circulating chamber or oil bath again and the control’s switch head (if applicable) is installed
as in 14.5.1 with the reset mechanism in its normal condition. The chamber or oil bath
temperature shall be determined by positioning a thermocouple wire adjacent to the control
under test. The chamber or coil bath temperature is raised from room temperature and held at
approximately 10 K below the set point until temperatures stabilize. The chamber or oil bath
temperature is then raised at a rate of not more than 0,5 K per minute until the contact operates.
Indication of contact separation is observed by applying the method of 11.4.11.102.
11.4.11.106 After the control has operated, the temperature of the chamber is allowed to cool
down to either +0 °C or –35 °C. Indication of contact separation is observed by applying the
method of 11.4.11.102.
11.4.12 Type 1.J or 2.J action
Additional subclauses:
11.4.12.101 For this test, the reset mechanism of the control will be held in the reset position
for the duration of the test from 11.4.12.102 to 11.4.12.104. The verification of the automatic
non-resetting above –35 °C will be carried out by 11.4.12.105 to 11.4.12.106. For SOD, the
verification of the automatic non-resetting above either +0 °C or –35 °C will be carried out by
11.4.12.105 to 11.4.12.106, as declared in item 103 of Table 1.
11.4.12.102 With the reset mechanism held in the reset position at room temperature, contact
separation is observed by a low-energy circuit, 0,05 A maximum.
11.4.12.103 The control’s sensing element is then installed in an air circulating chamber or
oil bath and the control’s switch head is installed as in 14.5.1. When th
...