|
IEC 63260
Edition 1.0 2020-05
™
IEEE Std 1082
INTERNATIONAL
STANDARD
Guide for incorporating human reliability analysis into probabilistic risk
assessments for nuclear power generating stations and other nuclear facilities
IEC 60320:2020-05(en) IEEE Std 1082-2017
All rights reserved. IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by the Institute of
Electrical and Electronics Engineers, Inc. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the IEC Central Office. Any questions about IEEE copyright should be addressed to the
IEEE. Enquiries about obtaining additional rights to this publication and other information requests should be
addressed to the IEC or your local IEC member National Committee.
IEC Central Office Institute of Electrical and Electronics Engineers, Inc.
3, rue de Varembé 3 Park Avenue
CH-1211 Geneva 20 New York, NY 10016-5997
Switzerland United States of America
Tel.: +41 22 919 02 11 [email protected]
[email protected] www.ieee.org
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and definitions clause of
IEC publications issued between 2002 and 2015. Some
IEC Customer Service Centre - webstore.iec.ch/csc entries have been collected from earlier publications of IEC
If you wish to give us your feedback on this publication or TC 37, 77, 86 and CISPR.
need further assistance, please contact the Customer Service
.
IEC 63260
Edition 1.0 2020-05
IEEE Std 1082™
INTERNATIONAL
STANDARD
Guide for incorporating human reliability analysis into probabilistic risk
assessments for nuclear power generating stations and other nuclear facilities
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 27.120.20 ISBN 978-2-8322-7547-4
Contents
1. Overview . 11
1.1 Scope . 11
1.2 Purpose . 11
2. Definitions, acronyms, and abbreviations . 11
2.1 Definitions . 11
2.2 Acronyms and abbreviations . 13
3. Overview of an integrated HRA . 13
3.1 General . 13
3.2 Overall evaluation issues . 14
3.3 HRA process . 15
4. Details of the HRA process . 17
4.1 General . 17
4.2 Steps in the human reliability analysis (HRA) process . 17
5. Documentation . 26
5.1 Purpose . 26
5.2 Structure . 26
Annex A (informative) An example for documenting HRA data . 28
Annex B (informative) Bibliography . 32
Annex C (informative) IEEE list of participants . 34
Published by IEC under license from IEEE. © 2017 IEEE. All rights reserved.
IEEE Std 1082-2017
Guide for Incorporating Human Reliability Analysis into
Probabilistic Risk Assessments for Nuclear Power Generating Stations
and Other Nuclear Facilities
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation.
IEEE Standards documents are developed within IEEE Societies and Standards Coordinating Committees of the
IEEE Standards Association (IEEE-SA) Standards Board. IEEE develops its standards through a consensus
development process, which brings together volunteers representing varied viewpoints and interests to achieve
the final product. Volunteers are not necessarily members of IEEE and serve without compensation. While IEEE
administers the process and establishes rules to promote fairness in the consensus development process, IEEE
does not independently evaluate, test, or verify the accuracy of any of the information contained in its
standards. Use of IEEE Standards documents is wholly voluntary. IEEE documents are made available for use
subject to important notices and legal disclaimers (see http://standards.ieee.org/IPR/disclaimers.html for more
information).
IEC collaborates closely with IEEE in accordance with conditions determined by agreement between the two
organizations.
2) The formal decisions of IEC on technical matters express, as nearly as possible, an international consensus of
opinion on the relevant subjects since each technical committee has representation from all interested IEC
National Committees. The formal decisions of IEEE on technical matters, once consensus within IEEE Societies
and Standards Coordinating Committees has been reached, is determined by a balanced ballot of materially
interested parties who indicate interest in reviewing the proposed standard. Final approval of the IEEE
standards document is given by the IEEE Standards Association (IEEE-SA) Standards Board.
3) IEC/IEEE Publications have the form of recommendations for international use and are accepted by IEC
National Committees/IEEE Societies in that sense. While all reasonable efforts are made to ensure that the
technical content of IEC/IEEE Publications is accurate, IEC or IEEE cannot be held responsible for the way in
which they are used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
(including IEC/IEEE Publications) transparently to the maximum extent possible in their national and regional
publications. Any divergence between any IEC/IEEE Publication and the corresponding national or regional
publication shall be clearly indicated in the latter.
5) IEC and IEEE do not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC and IEEE are not responsible
for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or IEEE or their directors, employees, servants or agents including individual
experts and members of technical committees and IEC National Committees, or volunteers of IEEE Societies
and the Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board,
for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect,
or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this
IEC/IEEE Publication or any other IEC or IEEE Publications.
8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that implementation of this IEC/IEEE Publication may require use of
material covered by patent rights. By publication of this standard, no position is taken with respect to the
existence or validity of any patent rights in connection therewith. IEC or IEEE shall not be held responsible for
identifying Essential Patent Claims for which a license may be required, for conducting inquiries into the legal
validity or scope of Patent Claims or determining whether any licensing terms or conditions provided in
connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or
non-discriminatory. Users of this standard are expressly advised that determination of the validity of any patent
rights, and the risk of infringement of such rights, is entirely their own responsibility.
Published by IEC under license from IEEE. © 2017 IEEE. All rights reserved.
– vi – IEC 63260:2020
IEEE Std 1082-2017
International Standard IEC 63260/IEEE Std 1082 has been processed through IEC technical
committee 45A: Instrumentation, control and electrical power systems of nuclear facilities,
under the IEC/IEEE Dual Logo Agreement.
The text of this standard is based on the following documents:
IEEE Std FDIS Report on voting
IEEE Std 1082-2017 45A/1285/FDIS 45A/1293/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
The IEC Technical Committee and IEEE Technical Committee have decided that the contents
of this publication will remain unchanged until the stability date indicated on the IEC web site
under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
Published by IEC under license from IEEE. © 2017 IEEE. All rights reserved.
– vii – IEEE Std 1082™-2017
IEEE Std 1082-2017
(Revision of IEEE Std 1082-1997)
IEEE Guide for Incorporating
Human Reliability Analysis into
Probabilistic Risk Assessments for
Nuclear Power Generating Stations
and Other Nuclear Facilities
Sponsor
Nuclear Power Engineering Committee
of the
IEEE Power and Energy Society
Approved 6 December 2017
IEEE-SA Standards Board
Published by IEC under license from IEEE. © 2017 IEEE. All rights reserved.
– viii –
IEEE Std 1082-2017
Abstract: A structured framework for the incorporation of human reliability analysis (HRA) into
probabilistic risk assessments (PRAs) is provided in this guide. To enhance the analysis of human/
system interactions in PRAs, to help ensure reproducible conclusions, and to standardize the
documentation of such assessments are the purposes of this guide. To do this, a specific HRA
framework is developed from standard practices. The HRA framework is neutral with respect to
specific HRA methods.
Keywords: HRA, human reliability analysis, IEEE 1082™, PRA, probabilistic risk assessment
Published by IEC under license from IEEE. © 2017 IEEE. All rights reserved.
– ix –
IEEE Std 1082-2017
,(((Introduction
This introduction is not part of IEEE Std 1082-2017, Guide for Incorporating Human Reliability Analysis into
Probabilistic Risk Assessments for Nuclear Power Generating Stations and Other Nuclear
...