IEC TR 61340-1:2012/AMD1:2020

Amendment 1 - Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements

IEC TR 61340-1:2012/AMD1:2020

Name:IEC TR 61340-1:2012/AMD1:2020   Standard name:Amendment 1 - Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements
Standard number:IEC TR 61340-1:2012/AMD1:2020   language:English language
Release Date:09-Jun-2020   technical committee:TC 101 - Electrostatics
Drafting committee:MT 8 - TC 101/MT 8   ICS number:01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION

IEC TR 61340-1
Edition 1.0 2020-06
TECHNICAL
REPORT
AMENDMENT 1
Electrostatics –
Part 1: Electrostatic phenomena – Principles and measurements

IEC TR 61340-1:2012-06/AMD1:2020-06(en)





your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.

need further assistance, please contact the Customer Service

.
IEC TR 61340-1
Edition 1.0 2020-06
TECHNICAL
REPORT
AMENDMENT 1
Electrostatics –
Part 1: Electrostatic phenomena – Principles and measurements

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 17.220.99; 29.020 ISBN 978-2-8322-8394-3

– 2 – IEC TR 61340-1:2012/AMD1:2020
© IEC 2020
FOREWORD
This amendment has been prepared by IEC technical committee 101: Electrostatics.
The text of this amendment is based on the following documents:
Draft TR Report on voting
101/598/DTR 101/604/RVDTR
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
2 Normative references
Add the following new references:
IEC TS 60079-32-1:2013, Explosive atmospheres – Part 32-1: Electrostatic hazards, guidance
IEC 60079-32-2, Explosive atmospheres – Part 32-2: Electrostatic hazards – Tests
IEC 61340-6-1, Electrostatics – Part 6-1: Electrostatic control for healthcare – General
requirements for facilities
ISO/IEC 80079-20-2, Explosive atmospheres – Part 20-2: Material characteristics –
Combustible dusts test methods
ISO 80079-36:2016, Explosive atmospheres – Part 36: Non-electrical equipment for explosive
atmospheres – Basic method and requirements
Replace the reference to IEC 61340-5-2 with the following reference:
IEC TR 61340-5-2, Electrostatics – Part 5-2: Protection of electronic devices from
electrostatic phenomena – User guide
Delete the references to IEC 61241-2-3 and BS EN 1
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27