|
CISPR 16-1-4
Edition 4.0 2020-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INT ERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
C OMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
AMENDMENT 1
AMENDEMENT 1
Specification for radio disturbance and immunity measuring apparatus
and methods –
Part 1-4: Radio disturbance and immunity measuring apparatus – Antennas
and test sites for radiated disturbance measurements
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques –
Partie 1-4: Appareils de mesure des perturbations radioélectriques et de
l'immunité aux perturbations radioélectriques – Antennes et emplacements
d'essai pour les mesures des perturbations rayonnées
CISPR 16-1-4:2019-01/AMD1:2020-06(en-fr)
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni
utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et
les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and once 67 000 electrotechnical terminology entries in English and
a month by email. French extracted from the Terms and definitions clause of IEC
publications issued between 2002 and 2015. Some entries
IEC Customer Service Centre - webstore.iec.ch/csc have been collected from earlier publications of IEC TC 37, 77,
If you wish to give us your feedback on this publication or need 86 and CISPR.
further assistance, please contact the Customer Service
.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - Le premier dictionnaire d'électrotechnologie en ligne au monde,
webstore.iec.ch/advsearchform avec plus de 22 000 articles terminologiques en anglais et en
La recherche avancée permet de trouver des publications IEC français, ainsi que les termes équivalents dans 16 langues
en utilisant différents critères (numéro de référence, texte, additionnelles. Egalement appelé Vocabulaire
comité d’études,…). Elle donne aussi des informations sur les Electrotechnique International (IEV) en ligne.
projets et les publications remplacées ou retirées.
Glossaire IEC - std.iec.ch/glossary
IEC Just Published - webstore.iec.ch/justpublished 67 000 entrées terminologiques électrotechniques, en anglais
Restez informé sur les nouvelles publications IEC. Just et en français, extraites des articles Termes et définitions des
Published détaille les nouvelles publications parues. publications IEC parues entre 2002 et 2015. Plus certaines
Disponible en ligne et une fois par mois par email. entrées antérieures extraites des publications des CE 37, 77,
86 et CISPR de l'IEC.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[email protected] .
Electropedia - www.electropedia.org
CISPR 16-1-4
Edition 4.0 2020-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
INT ERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
C OMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
AMENDMENT 1
AMENDEMENT 1
Specification for radio disturbance and immunity measuring apparatus
and methods –
Part 1-4: Radio disturbance and immunity measuring apparatus – Antennas
and test sites for radiated disturbance measurements
Spécifications des méthodes et des appareils de mesure des perturbations
radioélectriques et de l'immunité aux perturbations radioélectriques –
Partie 1-4: Appareils de mesure des perturbations radioélectriques et de
l'immunité aux perturbations radioélectriques – Antennes et emplacements
d'essai pour les mesures des perturbations rayonnées
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.100.10; 33.100.20 ISBN 978-2-8322-8450-6
– 2 – CISPR 16-1-4:2019/AMD1:2020
© IEC 2020
FOREWORD
This amendment has been prepared by subcommittee CISPR A: Radio-interference
measurements and statistical methods, of IEC technical committee CISPR: International special
committee on radio interference.
The text of this amendment is based on the following documents:
FDIS Report on voting
CIS/A/1316/FDIS CIS/A/1320/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
_____________
3.2 Abbreviated terms
Add the following new abbreviated terms to the existing list:
DRH double ridged horn
XP cross polarization
PDF probability density function
4.5.5 Cross-polar response of antenna
Delete, in the first sentence of the existing last paragraph, the cross-reference to [21].
© IEC 2020
4.7 Special antenna arrangements – large-loop antenna system
Replace the first sentence of the third paragraph with the following new sentence:
The EUT shall be positioned in the centre of the LLAS on a non-conductive support table.
Replace the third sentence of the third paragraph with the following new sentence:
Guidelines for routing of EUT cables are given in C.3 and Figure C.6.
Add, after the existing third paragraph, the following new paragraph:
The LLAS may be placed in any environment. Placement inside a shielded room, SAC, FAR, or
weather-protected OATS is permitted. Placement in a shielded environment is recommended
to eliminate ambient signals allowing for better sensitivity to EUT emissions. A minimum
distance of 0,5 m between the LLAS and any metallic plane is recommended. The validation of
the LLAS shall be performed at the location where the LLAS measurements normally take place
to take into account the effect of the environment (see C.4).
Replace, in the NOTE, "Correction factors" with "Conversion factors".
C.3 Construction of a large-loop antenna (LLA)
Replace the existing third paragraph with the following paragraph:
The standard diameter of each LLA is defined as D = 2 m (i.e. the reference diameter). If
necessary, e.g. in the case of a large EUT, D may be increased. However, in the frequency
range up to 30 MHz, the maximum diameter allowed is 4 m. Further increase of the diameter
can result in non-reproducible resonances of the LLAS response at the high-frequency end of
the measuring range. The validation method specified in C.4 applies for LLAS loops with
diameters of 2 m, 3 m, or 4 m.
Replace the second sentence of the seventh paragraph "The insertion loss of the current probe
shall be sufficiently low (see NOTE 1)." with "The insertion impedance of the current probe
should be sufficiently low (see NOTE)."
Delete the existing NOTE 1 and NOTE 2.
– 4 – CISPR 16-1-4:2019/AMD1:2020
© IEC 2020
Add, between the seventh and eighth paragraphs, the following new NOTE:
NOTE To obtain a flat frequency response for each LLA at the lower end of the 9 kHz to 30 MHz frequency range,
the resistive part of the insertion impedance, R , of the current probe is designed to be much smaller than 2π f L at
c c
f = 9 kHz, where L represents the inductance of the current probe. In addition, R + R is to be less than or equal to
c c i
X /10 = (2π f L)/10 at 9 kHz, where R is the resistance of the inner conductor of the loop and L is the loop inductance.
i i
This inductance is about 1,5 µH/m along the circumference; thus, for each standard LLA whose diameter is 2 m,
X ≈ 0,5 Ω at f = 9 kHz.
i
Add, at the end of the existing text (before Figure C.1), the following new paragraph:
To avoid unwanted capacitive coupling between the EUT and the LLAS, the distance between
the EUT and components of the LLAS shall be at least 0,10 times the loop diameter. Particular
attention should be paid to the leads of an EUT. Cables shall be routed together and leave the
test volume in the same octant of the LLAS, no closer than 0,4 m to any of the LLAS loops (see
Figure C.6).
C.4 Validation of an LLA
Replace the existing title of this clause with the following new title:
C.4 Validation of the LLAS
Replace the first paragraph of this clause with the following three new paragraphs:
The validation of the LLAS shall be carried out by measuring the current induced in each of the
three LLAs by means of the LLAS verification dipole connected to a 50 Ω RF generator, as
described in C.5. The magnetic field emitted by the dipole allows verification of the magnetic
field sensitivity of the LLAS. The electric field emitted by the LLAS verification dipole is intended
to verify that the electric field sensitivity of the LLAS is sufficiently low.
The validation of an LLAS shall be performed at the site where the LLAS measurements
normally take place. This is to account for the effect of the floor, walls, and similar objects or
surfaces in the specific environment of the LLAS.
Validation measurements shall be performed at least at the following frequencies: 9 kHz,
100 kHz, 1 MHz, 2 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz, 20 MHz, 25 MHz, and 30 MHz.
Replace the existing second and third paragraphs with the following new paragraphs:
The induced current shall be measured as a function of frequency in the range of 9 kHz to
30 MHz at the eight positions of the LLAS verification dipole shown in Figure C.7. During this
measurement, the LLAS verification dipole shall be in the plane of the LLA under test.
In each of the eight positions, the measured validation factor, expressed in dB(Ω) as
20 lg(V /I ), where V is the open circuit voltage of the RF generator and I is the measured
go I go I
current, shall not deviate by more than ±3 dB from the applicable reference validation factor
given in Figure C.8 and Table C.1.
© IEC 2020
Delete the existing fourth paragraph.
Add, before Figure C.7, three new paragraphs as follows:
The reference validation factors given in Figure C.8 and Table C.1 are valid for an LLAS with
circular loops having diameters of D = 2 m, 3 m, or 4 m.
Tabular values of the curves presented in Figure C.8 are given in Table C.1. These tabular
values shall be used for the LLAS validation.
Background material and the equations for calculating the reference validation factors are given
in CISPR TR 16-3:2020 [23].
Figure C.7 – The eight positions of the LLAS verification dipole during validation of an
LLA
Replace the existing figure with the following new figure:
Figure C.7 – The eight positions of the LLAS verification
dipole during validation of an LLA
– 6 – CISPR 16-1-4:2019/AMD1:2020
© IEC 2020
Figure C.8 – Validation factor for an LLA of 2 m diameter
Replace the existing figure, including its title, with the following new figure:
Figure C.8 – Reference validation factors for
...