|
IEC TS 62788-5-2
Edition 1.0 2020-06
TECHNICAL
SPECIFICATION
colour
inside
Measurement procedures for materials used in photovoltaic modules –
Part 5-2: Edge seals – Durability evaluation guideline
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and Definitions clause of
IEC publications issued since 2002. Some entries have been
IEC Customer Service Centre - webstore.iec.ch/csc collected from earlier publications of IEC TC 37, 77, 86 and
If you wish to give us your feedback on this publication or CISPR.
need further assistance, please contact the Customer Service
.
IEC TS 62788-5-2
Edition 1.0 2020-06
TECHNICAL
SPECIFICATION
colour
inside
Measurement procedures for materials used in photovoltaic modules –
Part 5-2: Edge seals – Durability evaluation guideline
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 27.160 ISBN 978-2-8322-8387-5
– 2 – IEC TS 62788-5-2:2020 IEC 2020
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Testing . 7
4.1 General . 7
4.2 Material level tests . 7
4.2.1 Moisture ingress . 7
4.2.2 Adhesion . 7
4.2.3 Dielectric strength . 7
4.2.4 Material specimen UV exposure conditions . 7
4.2.5 Volume resistivity . 8
4.3 Mini-module testing . 9
4.4 Full-size module testing . 11
5 Test report . 12
Annex A (informative) Example of breakthrough time extrapolation . 14
Figure 1 – Material specimen test flow diagram . 8
Figure 2 – Mini-module test flow diagram . 10
Figure 3 – Module test flow diagram . 12
Figure A.1 – Example plot of transient WVTR through a 1 mm thick film of a desiccant
filled polyisobutylene based edge seal at 100 % RH at 85 °C and at 60 °C . 15
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MEASUREMENT PROCEDURES FOR MATERIALS
USED IN PHOTOVOLTAIC MODULES –
Part 5-2: Edge seals –
Durability evaluation guideline
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. In exceptional
circumstances, a technical committee may propose the publication of a Technical Specification
when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development or where, for any other reason, there is the
future but no immediate possibility of an agreement on an International Standard.
Technical Specifications are subject to review within three years of publication to decide
whether they can be transformed into International Standards.
IEC TS 62788-5-2, which is a Technical Specification, has been prepared by IEC technical
committee 82: Solar photovoltaic energy systems.
– 4 – IEC TS 62788-5-2:2020 IEC 2020
The text of this Technical Specification is based on the following documents:
DTS Report on voting
82/1665/DTS 82/1712A/RVDTS
Full information on the voting for the approval of this Technical Specification can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62788 series, published under the general title Measurement
procedures for materials used in photovoltaic modules, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific publication. At this date, the publication will be
• transformed into an International standard,
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
MEASUREMENT PROCEDURES FOR MATERIALS
USED IN PHOTOVOLTAIC MODULES –
Part 5-2: Edge seals –
Durability evaluation guideline
1 Scope
This part of IEC TS 62788 provides guidelines to assess the ability of an edge seal to prevent
moisture ingress from the edges of PV modules. This document does not cover frame adhesives
(sometimes colloquially referred to as edge seals) which by design do not serve to prevent
moisture ingress to a meaningful degree. Edge seals should keep moisture out, remain adhered,
and maintain electrically insulation from the environment. Much of the testing can be done on
the material level, but given the fact that there are multiple surfaces, materials interactions, and
mechanical stresses, testing on mini modules or modules is necessary. To accomplish this, this
document contains three types of test sample types, materials, mini-modules, and full-size
modules. It is intended that a quick evaluation and comparison can be made using materials
only. This would be followed up by more rigorous tests using mini-modules where all the
interfaces are correctly represented. And finally, full-size module tests are used to evaluate the
actual construction process to allow unanticipated concerns to be addressed.
This document is structured to evaluate the ability of an edge seal and the overall packaging
design to prevent moisture ingress and to provide sufficient electrical insulation according to
accepted qualification standards. It seeks to uncover inadequacies in the permeation properties
of the edge seal, electrical safety issues, or delamination resulting in moisture ingress. Here it
is implied that mini-modules and full-size modules are constructed in accordance with
IEC 61730 series This document does not attempt to evaluate the predicted service life of a
module with respect to overall performance. It is designed to determine at the material level if
the edge seal can keep moisture out, and then to uncover potential failure modes and/or
evaluate the probable effect of manufacturing changes on the performance of edge seals. Test
conditions focus on stresses likely to produce safety, moisture ingress, and debonding related
failure modes.
For the purposes of this document, an edge seal is defined as a polymeric material designed to
be placed between two impermeable (or extremely low permeability) frontsheet and backsheet
materials to restrict moisture ingress from the sides. In some cases, an encapsulant with a
diffusivity much lower than is found in polyethylene-co-vinyl acetate (EVA) may also serve the
purpose of an edge seal and may be evaluated according to this document for comparison.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60904 (all parts), Photovoltaic devices
IEC 61215-1:2016, Terrestrial photovoltaic (PV) modules – Design qualification and type
approval – Part 1: Test requirements
IEC 61215-2:2016, Terrestrial photov
...