IEC 60127-3:2015/AMD1:2020

Amendment 1 - Miniature fuses - Part 3: Sub-miniature fuse-links

IEC 60127-3:2015/AMD1:2020

Name:IEC 60127-3:2015/AMD1:2020   Standard name:Amendment 1 - Miniature fuses - Part 3: Sub-miniature fuse-links
Standard number:IEC 60127-3:2015/AMD1:2020   language:English language
Release Date:21-Jul-2020   technical committee:SC 32C - Miniature fuses
Drafting committee:MT 10 - TC 32/SC 32C/MT 10   ICS number:01 - GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION

IEC 60127-3
Edition 3.0 2020-07
INTERNATIONAL
STANDARD
AMENDMENT 1
Miniature fuses –
Part 3: Sub-miniature fuse-links

IEC 60127-3:2015-01/AMD1:2020-07(en)





your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform Electropedia - www.electropedia.org
The advanced search enables to find IEC publications by a The world's leading online dictionary on electrotechnology,
variety of criteria (reference number, text, technical containing more than 22 000 terminological entries in English
committee,…). It also gives information on projects, replaced and French, with equivalent terms in 16 additional languages.
and withdrawn publications. Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Glossary - std.iec.ch/glossary
details all new publications released. Available online and 67 000 electrotechnical terminology entries in English and
once a month by email. French extracted from the Terms and definitions clause of
IEC publications issued between 2002 and 2015. Some
IEC Customer Service Centre - webstore.iec.ch/csc entries have been collected from earlier publications of IEC
If you wish to give us your feedback on this publication or TC 37, 77, 86 and CISPR.

need further assistance, please contact the Customer Service

.
IEC 60127-3
Edition 3.0 2020-07
INTERNATIONAL
STANDARD
AMENDMENT 1
Miniature fuses –
Part 3: Sub-miniature fuse-links

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.120.50 ISBN 978-2-8322-8652-4

– 2 – IEC 60127-3:2015/AMD1:2020
© IEC 2020
FOREWORD
This amendment has been prepared by subcommittee 32C: Miniature fuses, of IEC technical
committee 32: Fuses.
The text of this amendment is based on the following documents:
FDIS Report on voting
32C/586/FDIS 32C/589/RVD
Full information on the voting for the approval of this amendment can be found in the report on
voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
Add, at the end of Clause 10, the following new text:
Addition of the following new Annex A:

© IEC 2020
Annex A
(normative)
Sub-miniature fuse-links according to standard sheet 3 and 4
with optional DC ratings
A.1 General
This annex supplements the requirements of this standard and is to be applied to already tested
and approved sub-miniature fuse-links.
This annex relates to requirements applicable to sub-miniature fuse-links adapted to printed
circuits and used for the protection of electric appliances, electronic equipment and component
parts thereof, normally intended to be used indoors.
The object of this annex is to define additional test methods for sub-miniature fuse-links
according to standard sheet 3 and 4 with optional DC ratings.
A.2 General notes on tests
In addition to the requirements of Clause 7 of IEC 60127-1:2006, the following criteria shall be
observed.
A.2.1 Type tests
Replacement of 7.2.1:
15 addition
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27