|
IEC TS 62966-3
Edition 1.0 2021-01
TECHNICAL
SPECIFICATION
colour
inside
Mechanical structures for electrical and electronic equipment – Aisle
containment for it cabinets –
Part 3: Aspects of operational and personal safety
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
.
IEC TS 62966-3
Edition 1.0 2021-01
TECHNICAL
SPECIFICATION
colour
inside
Mechanical structures for electrical and electronic equipment – Aisle
containment for it cabinets –
Part 3: Aspects of operational and personal safety
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 31.240 ISBN 978-2-8322-9318-8
– 2 – IEC TS 62966-3:2021 © IEC 2021
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 7
4 Safety requirements of an aisle containment. 8
4.1 General safety requirements . 8
4.2 Escape routes, emergency exits, escape doors, escape and evacuation plan . 8
4.2.1 Recommended dimensions of escape routes and escape
doors/emergency exits . 8
4.2.2 Functional aspects of escape doors . 11
4.2.3 Lighting and signposting of escape routes . 11
4.2.4 Escape and evacuation plan . 12
4.3 General – Fire protection in an aisle containment . 12
4.3.1 Overview . 12
4.3.2 Fire prevention . 13
4.3.3 Fire and smoke detection . 13
4.3.4 Fire fighting device . 16
4.3.5 Arrangement of extinguishing nozzles . 17
4.4 Lighting conditions . 19
Bibliography . 20
Figure 1 – Minimum width of escape routes in an aisle containment . 10
Figure 2 – Minimum height of escape routes in an aisle containment . 10
Figure 3 – Typical arrangement of an aisle containment representing a walk-in-
equipment solution . 13
Figure 4 – Cold and hot aisle containment (showing air flow and temperature areas) . 14
Figure 5 – Arrangement of aspirating smoke detectors (ASDs) in a cold aisle
containment with or without raised floor . 15
Figure 6 – Arrangement of aspirating smoke detectors (ASDs) in a hot aisle
containment . 16
Figure 7 – Arrangement of extinguishing nozzles in a cold aisle containment with or
without raised floor (showing flow-direction of extinguishing gas) . 18
Table 1 – Minimum width of escape routes and maximum reduction of clearance . 9
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MECHANICAL STRUCTURES FOR ELECTRICAL
AND ELECTRONIC EQUIPMENT –
AISLE CONTAINMENT FOR IT CABINETS –
Part 3: Aspects of operational and personal safety
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. In
exceptional circumstances, a technical committee may propose the publication of a Technical
Specification when
• the required support cannot be obtained for the publication of an International Standard,
despite repeated efforts, or
• the subject is still under technical development or where, for any other reason, there is the
future but no immediate possibility of an agreement on an International Standard.
Technical Specifications are subject to review within three years of publication to decide
whether they can be transformed into International Standards.
– 4 – IEC TS 62966-3:2021 © IEC 2021
IEC TS 62966-3, which is a Technical Specification, has been prepared by subcommittee
48D: Mechanical structures for electrical and electronic equipment, of IEC technical
committee 48: Electrical connectors and mechanical structures for electrical and electronic
equipment.
The text of this Technical Specification is based on the following documents:
DTS Report on voting
48D/725/DTS 48D/731/RVDTS
Full information on the voting for the approval of this Technical Specification can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 62966 series, published under the general title Mechanical
structures for electrical and electronic equipment – Aisle containment for IT cabinets, can be
found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
INTRODUCTION
This Part 3 of IEC 62966 serves as a guide for a consideration from a safety viewpoint of the
dimensional and air conditioning aspects of cold and hot aisle containments in data centres
described in IEC 62966-1 and IEC 62966-2.
Where aspects of this Technical specification conflict with national regulations and laws of the
member states concerned, the provisions of these national regulations shall apply.
Consideration is given to safety-related aspects, such as:
a) escape and evacuation plans;
b) escape routes;
c) emergency exits;
d) functional aspects of escape doors;
e) lighting conditions;
f) lighting and signposting of escape routes;
g) fire protection;
taking into account the existing stringent requirements placed on the protection of IT
equipment and the availability of the data the equipment contains.
– 6 – IEC TS 62966-3:2021 © IEC 2021
MECHANICAL STRUCTURES FOR ELECTRICAL
AND ELECTRONIC EQUIPMENT –
AISLE CONTAINMENT FOR IT CABINETS –
Part 3: Aspects of operational and personal safety
1 Scope
This part of IEC 62966 defines the requirements for operational and personal safety of aisle
containments for IT cabinets.
The aim is to provide physical security for the IT equipment installed in the containment using
the criteria “availability” and “safety”.
The requirements apply to all operational, working and maintenance procedures.
This document does not apply to ordinary persons, when using installations and equipment.
The requirements described herein are also intended to ensure that it is possible for
authorized personnel to enter and remain in the containment (as accessible equipment) and
to maintain or upgrade the systems installed in the containment without risk. It should also be
possible to evacuate the containment quickly and safely at any time, especially in the event of
a fire or any other hazardous situation, whilst reducing the h
...