|
IEC 62841-3-1
Edition 1.0 2021-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Electric motor-operated hand-held tools, transportable tools and lawn and
garden machinery – Safety –
Part 3-1: Particular requirements for transportable table saws
Outils électroportatifs à moteur, outils transportables et machines pour jardins
et pelouses – Sécurité –
Partie 3-1: Exigences particulières pour les scies circulaires à table
transportables
IEC 62841-3-1:2014-06/AMD1:2021-03(en-fr)
your local IEC member National Committee for further information.
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.
A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.
Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire
Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc
Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[email protected] .
IEC 62841-3-1
Edition 1.0 2021-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Electric motor-operated hand-held tools, transportable tools and lawn and
garden machinery – Safety –
Part 3-1: Particular requirements for transportable table saws
Outils électroportatifs à moteur, outils transportables et machines pour jardins
et pelouses – Sécurité –
Partie 3-1: Exigences particulières pour les scies circulaires à table
transportables
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.140.20 ISBN 978-2-8322-9399-7
– 2 – IEC 62841-3-1:2014/AMD1:2021
© IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE
TOOLS AND LAWN AND GARDEN MACHINERY – SAFETY –
Part 3-1: Particular requirements for transportable table saws
AMENDMENT 1
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to IEC 62841-3-1:2014 has been prepared by IEC technical committee 116:
Safety of motor-operated electric tools.
The text of this Amendment is based on the following documents:
Draft Report on voting
116/485/FDIS 116/492/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
© IEC 2021
The language used for the development of this Amendment is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,
available at /members_experts/refdocs. The main document types developed by
IEC are described in greater detail at /standardsdev/publications/.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
2 Normative references
Replace the existing normative reference ISO 180 with the following:
ISO 180:2019, Plastics – Determination of Izod impact strength
3 Terms and definitions
Replace the existing definition 3.110 with the following:
3.110
kerf width
maximum distance between two parallel planes that are touching the opposing sides of at
least three saw blade tooth tips
8 Marking and instructions
Add the following new subclause:
8.2 Addition:
NOTE 101 In the United States of America, the following additional requirements apply.
The following statements shall be verbatim:
a) DANGER – Never place your hands in the vicinity or in line with the saw blade.
b) WARNING – “Wear eye protection”.
NOTE 102 It is possible to replace the above verbatim text with symbol M004 of ISO 7010 (2011-05).
c) WARNING – Always use a properly functioning saw-blade guard, riving knife and anti-kickback device for
every operation for which it can be used, including all through sawing.
– 4 – IEC 62841-3-1:2014/AMD1:2021
© IEC 2021
NOTE 103 If an anti-kickback device is not provided, the text is revised as follows:
WARNING – Always use a properly functioning saw-blade guard and riving knife for every operation for which
it can be used, including all through sawing.
NOTE 104 It is possible to replace the term “anti-kickback device” with “anti-kickback pawls” or “anti-kickback
rollers”.
d) WARNING – Use a push-stick or push-block when required.
e) WARNING – Do not perform any operation freehand.
f) WARNING – Pay particular attention to instructions on reducing risk of kickback. (or “Know how to reduce risk
of kickback.”)
g) WARNING – Never reach around or over saw blade. (or “Never reach in back of or over saw blade.”)
h) WARNING – Turn off tool and wait for saw blade to stop before moving workpiece or changing settings.
i) WARNING – Never stand directly in line with the saw blade. Always position your body on the same side of the
saw blade as the fence.
8.14.1.101 Safety instructions for table saws
Replace the existing text of NOTE 1 of 8.14.1.101 1) b) with the following new text:
NOTE 1 If an anti-kickback device is not provided, the warning is revised as follows:
Always use saw blade guard and riving knife for every through-cutting operation. For through-cutting
operations where the saw blade cuts completely through the thickness of the workpiece, the guard and other safety
devices help reduce the risk of injury.
Replace the existing text of 8.14.1.101 1) c) with the following new text:
c) After completing a non-through cut such as rabbeting, resawing, or dadoing, restore
the riving knife to the extended-up position. With the riving knife in the extended-up
position, reattach the blade guard and the anti-kickback device. The guard, riving
knife, and anti-kickback device help to reduce the risk of injury.
Replace the existing text of NOTE 3 of 8.14.1.101 1) c) with the following new text:
NOTE 3 If an anti-kickback device is not provided, the warning is revised as follows:
After completing a non-through cut such as rabbeting, resawing, or dadoing, restore the riving knife to the
extended-up position. With the riving knife in the extended-up position, reattach the blade guard. The
guard and riving knife help to reduce the risk of injury.
Replace the existing text of NOTE 1 of 8.14.1.101 1) f) with the following new text:
NOTE 1 If an anti-kickback device is not provided, the warning is revised as follows:
For the riving knife to work, it must be engaged in the workpiece. The riving knife is ineffective when cutting
workpieces that are too short to be engaged with the riving knife. Under these conditions, a kickback cannot be
prevented by the riving knife.
Replace the existi
...