IEC 61169-60:2021

Radio-frequency connectors - Part 60: Sectional specification for RF coaxial connectors with push on mating - Characteristic impedance 50 Ohm (type SMPM)

IEC 61169-60:2021

Name:IEC 61169-60:2021   Standard name:Radio-frequency connectors - Part 60: Sectional specification for RF coaxial connectors with push on mating - Characteristic impedance 50 Ohm (type SMPM)
Standard number:IEC 61169-60:2021   language:English and French language
Release Date:16-Mar-2021   technical committee:SC 46F - RF and microwave passive components
Drafting committee:WG 1 - TC 46/SC 46F/WG 1   ICS number:33.120.30 - RF connectors

IEC 61169-60
Edition 1.0 2021-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Radio-frequency connectors –
Part 60: Sectional specification for RF coaxial connectors with push on mating –
Characteristic impedance 50 Ohm (type SMPM)

Connecteurs pour fréquences radioélectriques –
Partie 60: Spécification intermédiaire relative aux connecteurs coaxiaux pour
fréquences radioélectriques avec couplage par poussée – Impédance
caractéristique 50 Ohm (type SMPM)





your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Recherche de publications IEC - IEC online collection - oc.iec.ch
webstore.iec.ch/advsearchform Découvrez notre puissant moteur de recherche et consultez
La recherche avancée permet de trouver des publications IEC gratuitement tous les aperçus des publications. Avec un
en utilisant différents critères (numéro de référence, texte, abonnement, vous aurez toujours accès à un contenu à jour
comité d’études, …). Elle donne aussi des informations sur adapté à vos besoins.
les projets et les publications remplacées ou retirées.

Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
Le premier dictionnaire d'électrotechnologie en ligne au
Restez informé sur les nouvelles publications IEC. Just
monde, avec plus de 22 000 articles terminologiques en
Published détaille les nouvelles publications parues.
anglais et en français, ainsi que les termes équivalents dans
Disponible en ligne et une fois par mois par email.
16 langues additionnelles. Egalement appelé Vocabulaire

Electrotechnique International (IEV) en ligne.
Service Clients - webstore.iec.ch/csc

Si vous désirez nous donner des commentaires sur cette
publication ou si vous avez des questions contactez-nous:
[email protected] .
IEC 61169-60
Edition 1.0 2021-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Radio-frequency connectors –
Part 60: Sectional specification for RF coaxial connectors with push on mating –

Characteristic impedance 50 Ohm (type SMPM)

Connecteurs pour fréquences radioélectriques –

Partie 60: Spécification intermédiaire relative aux connecteurs coaxiaux pour

fréquences radioélectriques avec couplage par poussée – Impédance

caractéristique 50 Ohm (type SMPM)

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.30 ISBN 978-2-8322-9541-0

– 2 – IEC 61169-60:2021 © IEC 2021
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Mating face and gauge information . 7
4.1 Dimensions – General connectors – Grade 2 . 7
4.1.1 SMPM connector with pin-centre contact . 7
4.1.2 SMPM connector with socket-centre contact (see Figure 3) . 9
4.2 SMPM gauges . 10
4.2.1 SMPM gauge pin for socket-centre contact . 10
4.2.2 Gauges for outer contact of SMPM connector with socket-centre contact. 11
5 Quality assessment procedure . 19
5.1 General . 19
5.2 Rating and characteristics (see Clause 5 of IEC 61169-1:2013) . 19
5.3 Test schedule and inspection requirements. 22
5.3.1 Acceptance tests . 22
5.3.2 Periodic tests . 22
5.4 Procedures for the quality conformance . 24
5.4.1 Quality conformance inspection . 24
5.4.2 Quality conformance and its maintenance . 24
6 Instructions for preparation of detail specifications (DS) . 24
6.1 General . 24
6.2 Identification of the component . 24
6.3 Performances . 25
6.4 Marking, ordering information and related matters . 25
6.5 Selection of tests, test conditions and severities . 25
6.6 Blank detail specification pro-forma for type SMPM connector . 26
7 Marking . 30
7.1 Marking of component . 30
7.2 Marking and contents of package . 30

Figure 1 – SMPM connector with pin-centre contact – Full detent (for dimensions, see
Table 1) . 7
Figure 2 – SMPM connector with pin-centre contact – Smooth bore (for dimensions,
see Table 2) . 8
Figure 3 – SMPM connector with socket-centre contact (for dimensions, see Table 3) . 9
Figure 4 – SMPM gauge pin for socket-centre contact (for dimensions, see Table 4) . 10
Figure 5 – SMPM engagement force gauge – Full detent (for dimensions, see Table 5) . 11
Figure 6 – SMPM Separation force gauge – Full detent (for dimensions, see Table 6) . 13
Figure 7 – SMPM Engagement force gauge – Smooth bore (for dimensions, see Table
7) . 15
Figure 8 – SMPM Separation force gauge – Smooth bore (for dimensions, see Table 8) . 17
Figure 9 – SMPM gauge block (for dimensions, see Table 9) . 18

Table 1 – Dimensions of SMPM connector with pin-centre contact full detent . 7

Table 2 – Dimensions of SMPM connector with pin-centre contact – Smooth bore . 8
Table 3 – Dimensions of SMPM connector with socket-centre contact. 9
Table 4 – Dimensions of SMPM gauge pin for socket-centre contact . 10
Table 5 – Dimensions of SMPM engagement force gauge – Full detent . 12
Table 6 – Dimensions of SMPM separation force gauge – Full detent . 14
Table 7 – Dimensions of SMPM engagement force gauge – Smooth bore . 16
Table 8 – Dimensions of SMPM separation force gauge – Smooth bore . 18
Table 9 – Dimensions of SMPM gauge block . 19
Table 10 – Preferred climatic categories (see IEC 60068-1) . 19
Table 11 – Rating and characteristics . 20
Table 12 – Acceptance tests . 22
Table 13 – Periodic tests . 23

– 4 – IEC 61169-60:2021 © IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO-FREQUENCY CONNECTORS –
Part 60: Sectional specification for RF coaxial connectors with push
on mating – Characteristic impedance 50 Ohm (type SMPM)

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the co
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27