|
IEC 62271-106
Edition 2.0 2021-04
INTERNATIONAL
STANDARD
High-voltage switchgear and controlgear –
Part 106: Alternating current contactors, contactor-based controllers and motor-
starters
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
.
IEC 62271-106
Edition 2.0 2021-04
INTERNATIONAL
STANDARD
High-voltage switchgear and controlgear –
Part 106: Alternating current contactors, contactor-based controllers and motor-
starters
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.130.10 ISBN 978-2-8322-9635-6
– 2 – IEC 62271-106:2021 IEC 2021
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 7
3 Terms and definitions . 8
4 Normal and special service conditions . 23
5 Ratings . 24
6 Design and construction . 38
7 Type tests . 42
8 Routine tests . 70
9 Guide to the selection of contactors and motor-starters for service (informative) . 72
10 Information to be given with enquiries, tenders and orders (informative) . 76
11 Transport, storage, installation, operating instructions and maintenance. 78
12 Safety . 78
13 Influence of the product on the environment . 78
Annex A (normative) Identification of test objects . 79
Annex B (informative) Determination of the equivalent RMS value of a short-time
current during a short-circuit of a given duration . 80
Annex C (normative) Method for weatherproofing test for outdoor switchgear and
controlgear . 81
Annex D (informative) References for auxiliary and control circuit components . 82
Annex E (normative) Tolerances on test quantities during tests . 83
Annex F (informative) Information and technical requirements to be given with
enquires, tenders and orders . 88
Annex G (informative) List of symbols and abbreviations . 89
Annex H (informative) Electromagnetic compatibility on site . 90
Annex I (informative) List of notes concerning certain countries . 91
Annex J (informative) Extension of validity type tests . 92
Annex K (informative) Exposure to pollution . 93
Annex AA (normative) Records and reports of type tests for making, breaking and
short-time current performance . 94
Annex BB (normative) Disconnectors and earthing switches used in controllers . 98
Bibliography . 100
Figure 1 – Examples of speed/time curves . 32
Figure 2 – Representation by two parameters of a prospective TRV of a circuit . 60
Figure 3 – Representation of the specified TRV by a two-parameter reference line and
a delay line . 60
Figure 4 – Determination of power-frequency recovery voltage . 61
Figure 5 – Test duties A and B – preferred earth point . 63
Figure 6 – Test duties A and B – alternative earth point . 64
Figure 7 – Test duty C – preferred earth point . 64
Figure 8 – Test duty C – alternative earth point . 65
Figure 9 – Characteristics for determining take-over current . 66
Figure BB.1 – Disconnector and earthing switch locations . 98
Table 1 – Ratings and characteristics . 25
Table 2 – Utilization categories . 31
Table 3 – Characteristics dependent on starter type . 37
Table 4 – Applicable type tests . 44
Table 5 – Intermittent duty operating cycles . 48
Table 6 – Verification of rated making and breaking capacities – Conditions for making
and breaking corresponding to the several utilization categories at rated voltage U . 52
r
Table 7 – Relationship between current broken I and OFF time . 55
c
Table 8 – Overload current withstand requirements . 56
Table 9 – Transient recovery voltage characteristics . 63
Table 10 – Verification of the number of on-load operating cycles – Conditions for
making and breaking corresponding to the several utilization categories . 68
Table E.101 – Tolerances on test quantities for type test . 83
Table G.101 – Additional list of symbols and abbreviations . 89
– 4 – IEC 62271-106:2021 IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR –
Part 106: Alternating current contactors,
contactor-based controllers and motor-starters
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62271-106 has been prepared by subcommittee 17A: Switching
devices, of IEC technical committee 17: High-voltage switchgear and controlgear.
This second edition cancels and replaces the first edition published in 2011. It constitutes a
technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
• document numbered to correspond to IEC 62271-1 2017.
The text of this International Standard is based on the following documents:
FDIS Report on voting
17A/1296/FDIS 17A/1301/RVD
Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
This standard is to be read in conjunction with IEC 62271-1:2017. In order to simplify the
indication of corresponding requirements, the same numbering of clauses and subclauses is
used as in IEC 62271-1. Modifications to these clauses and subclauses are given under the
same numbering, whilst additional subclauses are numbered from 101.
A list of all parts of the IEC 62271 series under the general title, High-voltage switchgear and
controlgear,
...