|
IEC 61636
Edition 2.0 2021-06
™
IEEE Std 1636
INTERNATIONAL
STANDARD
colour
inside
Software Interface for Maintenance Information Collection and Analysis
(SIMICA)
All rights reserved. IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by the Institute of
Electrical and Electronics Engineers, Inc. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the IEC Central Office. Any questions about IEEE copyright should be addressed to the
IEEE. Enquiries about obtaining additional rights to this publication and other information requests should be
addressed to the IEC or your local IEC member National Committee.
IEC Central Office Institute of Electrical and Electronics Engineers, Inc.
3, rue de Varembé 3 Park Avenue
CH-1211 Geneva 20 New York, NY 10016-5997
Switzerland United States of America
Tel.: +41 22 919 02 11 [email protected]
[email protected] www.ieee.org
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
.
IEC 61636
Edition 2.0 2021-06
IEEE Std 1636™
INTERNATIONAL
STANDARD
colour
inside
Software Interface for Maintenance Information Collection and Analysis
(SIMICA)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 25.040.01; 35.060 ISBN 978-2-8322-9804-6
IEEE Std 1636™-2018 – i –
Contents
1. Overview . 9
General . 9
1.1 Scope . 9
1.2 Application . 10
1.3 Precedence . 11
1.4 Conventions used in this document . 11
2. Normative references . 11
3. Definitions, acronyms, and abbreviations . 12
3.1 Definitions . 12
3.2 Acronyms and abbreviations . 12
4. Diagnostic maturation . 12
5. The SIMICA family component standards . 13
5.1 Common elements . 13
5.2 Test results and session information—IEEE Std 1636.1 . 14
5.3 Maintenance action information—IEEE Std 1636.2 . 14
6. Conformance . 14
7. XML schema extensibility . 14
8. OWL ontology and XML schema names and locations . 15
9. Use of the OWL ontologies, XML schemas, and EXPRESS models associated with the SIMICA
family of standards and their publication revisions . 16
Annex A (normative) XML schema and OWL ontology . 18
Annex B (informative) Bibliography . 43
Annex C (informative) IEEE List of participants . 44
Published by IEC under licence from IEEE. © 2018 IEEE. All rights reserved.
– ii – IEEE Std 1636™-2018
SOFTWARE INTERFACE FOR MAINTENANCE INFORMATION
COLLECTION AND ANALYSIS (SIMICA)
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC document(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation.
IEEE Standards documents are developed within IEEE Societies and Standards Coordinating Committees of the
IEEE Standards Association (IEEE SA) Standards Board. IEEE develops its standards through a consensus
development process, approved by the American National Standards Institute, which brings together volunteers
representing varied viewpoints and interests to achieve the final product. Volunteers are not necessarily members
of IEEE and serve without compensation. While IEEE administers the process and establishes rules to promote
fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the
accuracy of any of the information contained in its standards. Use of IEEE Standards documents is wholly
voluntary. IEEE documents are made available for use subject to important notices and legal disclaimers (see
http://standards.ieee.org/ipr/disclaimers.html for more information).
IEC collaborates closely with IEEE in accordance with conditions determined by agreement between the two
organizations. This Dual Logo International Standard was jointly developed by the IEC and IEEE under the terms
of that agreement.
2) The formal decisions of IEC on technical matters express, as nearly as possible, an international consensus of
opinion on the relevant subjects since each technical committee has representation from all interested IEC
National Committees. The formal decisions of IEEE on technical matters, once consensus within IEEE Societies
and Standards Coordinating Committees has been reached, is determined by a balanced ballot of materially
interested parties who indicate interest in reviewing the proposed standard. Final approval of the IEEE standards
document is given by the IEEE Standards Association (IEEE SA) Standards Board.
3) IEC/IEEE Publications have the form of recommendations for international use and are accepted by IEC National
Committees/IEEE Societies in that sense. While all reasonable efforts are made to ensure that the technical
content of IEC/IEEE Publications is accurate, IEC or IEEE cannot be held responsible for the way in which they
are used or for any misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
(including IEC/IEEE Publications) transparently to the maximum extent possible in their national and regional
publications. Any divergence between any IEC/IEEE Publication and the corresponding national or regional
publication shall be clearly indicated in the latter.
5) IEC and IEEE do not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC and IEEE are not responsible
for any services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or IEEE or their directors, employees, servants or agents including individual
experts and members of technical committees and IEC National Committees, or volunteers of IEEE Societies and
the Standards Coordinating Committees of the IEEE Standards Association (IEEE SA) Standards Board, for any
personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for
costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC/IEEE
Publication or any other IEC or IEEE Publications.
8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that implementation of this IEC/IEEE Publication may require use of material
covered by patent rights. By publication of this standard, no position is taken with respect to the existence or
validity of any patent rights in connection therewith. IEC or IEEE shall not be held responsible for identifying
Essential Patent Claims for which a license may be required, for conducting inquiries into the legal validity or
scope of Patent Claims or determining whether any licensing terms or conditions provided in connection with
submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory.
Users of this standard are expressly advised that determination of the validity of any patent rights, and the risk
of infringement of such rights, is entirely their own responsibility.
IEC 61636/IEEE Std 1636 was processed through IEC technical committee 91: Electronics
assembly technology, under the IEC/IEEE Dual Logo Agreement. It is an International Standard.
Published by IEC under licence from IEEE. © 2018 IEEE. All rights reserved.
IEEE Std 1636™-2018 – iii –
The text of this International Standard is based on the following documents:
IEEE Std FDIS Report on voting
1636 (2018) 91/1716/FDIS 91/1728/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard, is English.
The IEC Technical Committee and IEEE Technical Committee have decided that the contents
of this document will remain unchanged until the stability date indicated on the IEC website
under webstore.iec.ch in the data related to the specific document. At this date, the document
will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
Published by IEC under licence from IEEE. © 2018 IEEE. All rights reserved.
IEEE Std 1636™-2018
(Revision of IEEE Std 1636-2009)
IEEE Standard for Software Interface
for Maintenance Information
Collection and Analysis (SIMICA)
Sponsor
IEEE Standards Coordinating Committee 20 on
Test and Diagnosis for Electronic Systems
Approved 27 September 2018
IEEE-SA Standards Board
Published by IEC under licence from IEEE. © 2018 IEEE. All rights reserved.
Abstract: Promoting and facilitating interoperability between components of automatic test systems
where test results and/or maintenance actions need to be shared is addressed in this standard. The
standard defines the common elements between both test results data and maintenance action
data. The common schema becomes a class of information that shall be used within the SIMICA
family of standards.
Keywords: automate
...