IEC 63056:2020/COR1:2021

Corrigendum 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems

IEC 63056:2020/COR1:2021

Name:IEC 63056:2020/COR1:2021   Standard name:Corrigendum 1 - Secondary cells and batteries containing alkaline or other non-acid electrolytes - Safety requirements for secondary lithium cells and batteries for use in electrical energy storage systems
Standard number:IEC 63056:2020/COR1:2021   language:English and French language
Release Date:23-Jun-2021   technical committee:SC 21A - Secondary cells and batteries containing alkaline or other non-acid electrolytes
Drafting committee:WG 5 - TC 21/SC 21A/WG 5   ICS number:29.220.30 - Alkaline secondary cells and batteries

 IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE
____________
IEC 63056 IEC 63056
Edition 1.0  2020-03 Édition 1.0  2020-03

Secondary cells and batteries containing Accumulateurs alcalins et autres accumulateurs
alkaline or other non-acid electrolytes – Safety à électrolyte non acide – Exigences de sécurité
requirements for secondary lithium cells and pour les accumulateurs au lithium pour
batteries for use in electrical energy storage utilisation dans des systèmes de stockage
systems d'énergie électrique
CO RRI G E NDUM 1
Corrections to the French version appear after the English text.
Les corrections à la version française sont données après le texte anglais.
5.3 The peak voltage of charging
Replace "battery system manufacturer" with "cell manufacturer" at the end of the existing
paragraph, as follows:
"When a charging current has an alternating component, a battery system manufacturer shall
ensure that the peak voltage of the charging current is under the upper limit charging voltage,
specified by the cell manufacturer, by monitoring the voltage of every single cell or cell block."
Replace the existing Table 1 with the following new Table 1:
Table 1 – Type test
Test items DUT
7.2 Resistance to abnormal heat minimum of 1
7.6 Protection for short circuit during transport and installation minimum of 1
7.4 Electric insulati
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27