IEC 60095-2:2021

Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals

IEC 60095-2:2021

Name:IEC 60095-2:2021   Standard name:Lead-acid starter batteries - Part 2: Dimensions of batteries and dimensions and marking of terminals
Standard number:IEC 60095-2:2021   language:English language
Release Date:08-Aug-2021   technical committee:TC 21 - Secondary cells and batteries
Drafting committee:WG 2 - TC 21/WG 2   ICS number:29.220.20 - Acid secondary cells and batteries

IEC 60095-2
Edition 5.0 2021-08
INTERNATIONAL
STANDARD
colour
inside
Lead-acid starter batteries –
Part 2: Dimensions of batteries and dimensions and marking of terminals




your local IEC member National Committee for further information.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.

IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary

(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc

If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
.
IEC 60095-2
Edition 5.0 2021-08
INTERNATIONAL
STANDARD
colour
inside
Lead-acid starter batteries –
Part 2: Dimensions of batteries and dimensions and marking of terminals

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.220.20; 43.040.10 ISBN 978-2-8323-0000-8

– 2 – IEC 60095-2:2021 © IEC 2021
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 General requirements . 8
4.1 General . 8
4.2 Marking . 8
4.2.1 Safety labelling . 8
4.2.2 Marking of the polarity of terminals . 8
4.3 Recycling . 9
4.3.1 Recycling of lead . 9
4.3.2 Recycling of plastic material . 9
4.4 Dimensions and design . 9
4.5 Dimensions of tapered battery terminals . 9
5 Recommended types used in Europe (EU) . 10
5.1 General . 10
5.2 Main dimensions of batteries. 10
5.3 Handles . 14
5.3.1 General . 14
5.3.2 Mounting of handles . 14
5.4 Mounting of batteries . 15
5.4.1 General . 15
5.4.2 Dimensions and arrangement of ledges and notches . 15
5.5 Terminals . 16
5.5.1 Position of terminals . 16
5.5.2 Dimensions of battery terminals . 16
5.5.3 Marking of polarity . 16
5.6 Special features of the battery lid . 17
5.6.1 General . 17
5.6.2 Semi bloc lid . 17
5.6.3 Central degassing . 17
5.6.4 Recessed holes . 17
5.6.5 Removable cell plugs . 18
5.6.6 Position of sensor openings . 18
5.7 Handling of starter batteries by robot-equipment . 19
5.8 Bulging and reinforcement of battery side walls . 21
6 Other battery types used in Europe (EU) . 22
6.1 General . 22
6.2 Main dimensions of batteries. 23
6.3 Handles . 28
6.4 Mounting of batteries . 28
6.4.1 General . 28
6.4.2 Dimensions and arrangement of ledges and notches . 28
6.5 Terminals . 28
6.5.1 Position of terminals . 28
6.5.2 Dimensions of battery terminals . 28

6.5.3 Marking of polarity . 28
6.6 Handling of starter batteries by robot-equipment . 28
7 Recommended types used in North America (AM) . 31
7.1 General . 31
7.2 Terminals and terminal configuration . 31
7.2.1 Tapered terminals . 31
7.2.2 Side terminals. 31
7.2.3 Terminal configuration . 32
7.3 Standard fastening on the bottom . 32
7.3.1 General . 32
7.3.2 Design of ledges . 32
7.3.3 Design of recesses . 33
7.4 Main dimensions of the battery group sizes AM. 37
8 Recommended types used in East Asia (AS) . 42
8.1 General . 42
8.2 Terminals and terminal configuration . 42
8.2.1 Design of terminals . 42
8.2.2 Dimensions and classification of terminals . 42
8.2.3 Configuration of terminals . 42
8.3 Main dimensions of the battery group sizes AS . 42

Figure 1 – Marking of polarity . 8
Figure 2 – Marking of polypropylene-polyethylene copolymer battery components . 9
Figure 3 – Dimensions of positive (on the right) and negative (on the left) terminal . 10
Figure 4 – Main dimensions of batteries of standard series LN and LBN – Top view . 11
Figure 5 – Details of Figure 4 . 12
Figure 6 – Main dimensions of batteries of standard series LN – Front view . 13
Figure 7 – Main dimensions of batteries of standard series LN – Side view . 14
Figure 8 – Details of ledges of Figure 6 and Figure 7 . 16
Figure 9 – Detail X – Notch on ledge. 16
Figure 10 – Degassing outlet . 17
Figure 11 – Recessed holes "M" for optional terminal protection . 18
Figure 12 – Removable cell plugs and sensor positions . 19
Figure 13 – Grips for handling by robot equipment . 20
Figure 14 – Section P-P of Figure 13 and Figure 22 . 20
Figure 15 – Detail U of Figure 13 and Figure 22 . 21
Figure 16 – Maximum allowed bulging on short sides . 21
Figure 17 – Reinforcement by thicker walls on short sides . 22
Figure 18 – Reinforcement by additional ribs on short sides. 22
Figure 19 – Main dimensions of batteries of series L, LB, E, EB . 26
Figure 20 – Main dimensions of batteries of series LS, LBS, ES, EBS . 27
Figure 21 – Details of Figure 19 and Figure 20 . 27
Figure 22 – Grips for handling by robot equipment for LBN series . 29
Figure 23 – Grips for handling by robot equipment for L and LS series . 29
Figure 24 – Detail V of Figure 23 . 30

– 4 – IEC 60095-2:2021 © IEC 2021
Figure 25 – Grips for handling by robot equipment for LB and LBS series – Option 1 . 30
Figure 26 – Grips for handling by robot equipment for LB and LBS series – Option 2 . 30
Figure 27 – Detail Y of Figure 25 and Figure 26 . 31
Figure 28 – Side terminal groove description . 32
Figure 29 – Side terminal groove dimensions in mm and (in) . 32
Figure 30 – Design for batteries with ledges on long sides for hold-down-devices in mm
and (in) .
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27