|
IEC TS 63163
Edition 1.0 2021-09
TECHNICAL
SPECIFICATION
Terrestrial photovoltaic (PV) modules for consumer products – Design
qualification and type approval
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
.
IEC TS 63163
Edition 1.0 2021-09
TECHNICAL
SPECIFICATION
Terrestrial photovoltaic (PV) modules for consumer products – Design
qualification and type approval
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 27.160 ISBN 978-2-8322-1024-3
– 2 – IEC TS 63163:2021 © IEC 2021
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 7
4 Selection of test samples . 9
5 Marking and documentation . 10
5.1 Nameplate . 10
5.2 Documentation . 11
5.2.1 Minimum requirements . 11
5.2.2 Information to be given in the documentation . 11
5.2.3 Assembly instructions . 12
6 Testing . 12
6.1 General . 12
6.2 Qualification test sequence – Category 1 . 13
6.3 Qualification test sequence – Category 2 . 13
6.4 Qualification test sequence – Category 3 . 15
6.5 Test conditions . 16
7 Pass criteria . 17
7.1 General . 17
7.2 Major visual defects . 18
8 Report . 18
9 Modifications . 19
10 Test procedures . 19
10.1 Visual inspection (CMQT 01) . 19
10.2 Performance at STC (CMQT 06.1) . 19
10.3 Maximum power determination (CMQT 02) . 19
10.4 Outdoor exposure test (CMQT 10.4) . 19
10.5 Hot-spot endurance test (CMQT 10.5) . 19
10.6 UV preconditioning test (CMQT 10.6) . 20
10.7 Thermal cycling test (CMQT 10.7) . 20
10.8 Humidity-freeze test (CMQT 10.8) . 20
10.9 Damp heat test (CMQT 10.9) . 20
10.10 Robustness of terminations test (CMQT 10.10) . 20
10.11 Wet leakage current test (CMQT 10.11) . 20
10.12 Static mechanical load test (CMQT 10.12) . 20
10.13 Bypass diode thermal test (CMQT 13) . 21
10.14 Stabilization (CMQT 10.14) . 21
10.15 Bending test (CMQT 10.15) . 21
10.16 Folding test (CMQT 10.16) . 21
10.16.1 Purpose . 21
10.16.2 Procedure for foldable module . 21
10.16.3 Final inspection . 21
10.16.4 Requirements . 21
10.17 Drop test (CMQT 10.17) . 21
10.17.1 General . 21
10.17.2 Drop the module from 1 m height onto a concrete floor. . 21
10.17.3 Final measurements . 22
10.17.4 Requirements . 22
10.18 Hail test (CMQT 10.18) . 22
10.19 Insulation test (CMQT 10.19) . 22
Annex A (informative) Overview of categories and potential applications . 23
Figure 1 – Geometry that shows radius of curvature of a flexible module . 8
Figure 2 – Qualification test sequence – Category 1 . 13
Figure 3 – Qualification test sequence – Category 2 . 14
Figure 4 – Qualification test sequence – Category 3 . 16
Figure 5 – Drop test . 22
Table 1 – Summary of test levels . 16
Table A.1 – Overview of categories and potential applications . 23
– 4 – IEC TS 63163:2021 © IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
TERRESTRIAL PHOTOVOLTAIC (PV) MODULES FOR CONSUMER
PRODUCTS – DESIGN QUALIFICATION AND TYPE APPROVAL
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC TS 63163 has been prepared by IEC technical committee 82: Solar photovoltaic energy
systems.
The text of this document is based on the following documents:
Draft Report on voting
82/1899/DTS 82/1931/RVDTS
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this Technical Specification is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at /members_experts/refdocs. The main document types developed by IEC are
described in greater detail at /standardsdev/publications.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
...