|
IEC TS 63042-202
Edition 1.0 2021-10
TECHNICAL
SPECIFICATION
colour
inside
UHV AC transmission systems –
Part 202: UHV AC Transmission line design
your local IEC member National Committee for further information.
IEC Central Office Tel.: +41 22 919 02 11
3, rue de
CH-1211 Geneva 20
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigendum or an amendment might have been published.
IEC publications search - webstore.iec.ch/advsearchform IEC online collection - oc.iec.ch
The advanced search enables to find IEC publications by a Discover our powerful search engine and read freely all the
variety of criteria (reference number, text, technical publications previews. With a subscription you will always
committee, …). It also gives information on projects, replaced have access to up to date content tailored to your needs.
and withdrawn publications.
Electropedia - www.electropedia.org
IEC Just Published - webstore.iec.ch/justpublished
The world's leading online dictionary on electrotechnology,
Stay up to date on all new IEC publications. Just Published
containing more than 22 000 terminological entries in English
details all new publications released. Available online and
and French, with equivalent terms in 18 additional languages.
once a month by email.
Also known as the International Electrotechnical Vocabulary
(IEV) online.
IEC Customer Service Centre - webstore.iec.ch/csc
If you wish to give us your feedback on this publication or
need further assistance, please contact the Customer Service
.
IEC TS 63042-202
Edition 1.0 2021-10
TECHNICAL
SPECIFICATION
colour
inside
UHV AC transmission systems –
Part 202: UHV AC Transmission line design
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 29.240.20 ISBN 978-2-8322-1035-7
– 2 – IEC TS 63042-202:2021 © IEC 2021
CONTENTS
FOREWORD . 10
1 Scope . 12
2 Normative references . 12
3 Terms and definitions . 13
4 Symbols and abbreviations . 13
5 UHV AC transmission line requirements . 14
5.1 General requirements . 14
5.2 Reliability requirements. 14
5.3 Electrical requirements . 14
5.4 Security requirements . 14
5.5 Safety requirements . 14
5.6 Environmental impact. 14
5.7 Economy . 14
6 Selection of clearance . 15
6.1 General . 15
6.2 Air gap, tower clearances (strike distance) . 15
6.2.1 Power frequency voltage . 15
6.2.2 Switching overvoltage . 15
6.2.3 Lightning overvoltage . 15
6.3 Phase to phase spacing (Horizontal, Vertical) . 16
6.4 Ground clearances – Statutory requirements, electric and magnetic field
limits . 16
6.5 Conductor-earth wire spacing, shielding angle – Lightning performance
criteria . 16
7 Insulation coordination, insulator and insulator string design . 17
7.1 General . 17
7.2 Insulation requirements – electrical design considerations . 17
7.3 Insulating materials, type of insulators . 17
7.4 Insulator string configurations for disc type insulators . 18
7.5 Mechanical design criteria of insulator strings and associated hardware
fittings . 19
8 Bundle-conductor selection . 19
8.1 General . 19
8.2 Conductor types . 19
8.3 Bundle conductor configurations . 20
8.3.1 Number of sub-conductors . 20
8.3.2 Bundle spacing . 20
8.4 Conductor bundle selection process . 20
8.4.1 Cross-section of conductor . 20
8.4.2 Conductor ampacity . 20
8.4.3 Requirements for electromagnetic environment . 21
8.4.4 Capital cost and loss evaluation . 21
8.5 Mechanical strength . 21
8.6 Conductor accessories . 22
8.6.1 General requirements for fittings . 22
8.6.2 Type and design features of link fittings, vibration dampers, spacers . 22
9 Earth wire/OPGW selection . 23
9.1 General . 23
9.2 Type of earth wire/OPGW . 23
9.3 Design Criteria/Requirements Specific to UHV Lines. 23
9.4 Induced voltages on earth wire . 23
10 Tower and foundation design . 24
10.1 General . 24
10.2 Tower classification . 24
10.2.1 General . 24
10.2.2 Conductor configuration . 24
10.2.3 Constructional features . 29
10.2.4 Line deviation angle . 29
10.2.5 Tower extensions . 30
10.2.6 Specific requirements . 30
10.3 Tower design . 30
10.3.1 General . 30
10.3.2 Selection of tower geometry based on electrical clearances . 30
10.3.3 Calculation of loads on tower . 31
10.3.4 Analysis using software . 31
10.3.5 Full scale tower testing . 32
10.3.6 Tower design methodology . 32
10.4 Foundation design . 33
10.4.1 General . 33
10.4.2 Open cast type foundations . 34
10.4.3 Raft type foundations . 34
10.4.4 Deep foundations (Pile/Well/Pier/Steel Anchor type) . 35
11 Environmental considerations . 35
11.1 General . 35
11.2 Electric field . 35
11.2.1 General . 35
11.2.2 Reference level of electric field . 35
11.2.3 Prediction of electric field . 36
11.2.4 Mitigation measures of electric field . 36
11.3 Magnetic field . 36
11.3.1 General . 36
11.3.2 Reference level of magnetic field . 36
11.3.3 Prediction of magnetic field . 36
11.3.4 Mitigation measures of magnetic field . 37
11.4 Corona noise (audible noise with corona discharge) . 37
11.4.1 General . 37
11.4.2 Characteristics of corona noise . 37
11.4.3 Reference level of corona noise . 37
11.4.4 Prediction of corona noise . 38
11.4.5 Mitigation measures of corona noise . 38
11.5 Radio interference with corona discharge . 38
11.5.1 General . 38
11.5.2 Characteristics of radio interference . 38
11.5.3 Reference level of radio interference . 39
11.5.4 Prediction of radio interference . 39
11.5.5 Mitigation measures of radio interference . 39
– 4 – IEC TS 63042-202:2021 © IEC 2021
11.6 Wind noise . 39
Annex A (informative) Experimental results and c
...