|
SLOVENSKI STANDARD
01-december-2018
1DGRPHãþD
SIST EN 62199:2005
Skoznjiki za enosmerne aplikacije
Bushings for DC application
Durchführungen für Gleichspannungsanwendungen
Traversées pour application en courant continu
Ta slovenski standard je istoveten z: EN IEC/IEEE 65700:2018
ICS:
29.080.20 Skoznjiki Bushings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC/IEEE 65700
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2018
ICS 29.080.20 Supersedes EN 62199:2004
English Version
Bushings for DC application
(IEC/IEEE 65700-19-03:2014)
Traversées pour application en courant continu Durchführungen für Gleichspannungsanwendungen
(IEC/IEEE 65700-19-03:2014) (IEC/IEEE 65700-19-03:2014)
This European Standard was approved by CENELEC on 2018-02-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC/IEEE 65700:2018 E
EN IEC/IEEE 65700:2018 (E)
European foreword
This document EN IEC/IEEE 65700:2018 consists of the text of IEC/IEEE 65700-19-03:2014 prepared
by IEC/SC 36A "Insulated bushings, of IEC technical committee 36: Insulators and Bushing
subcommittee of the IEEE-PES transformer committee".
The following dates are fixed:
• latest date by which this document has to be (dop) 2019-02-20
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2021-02-20
conflicting with this document have to be
withdrawn
This document supersedes EN 62199:2004.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC/IEEE 65700-19-03:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60296 NOTE Harmonized as EN 60296.
IEC 60376 NOTE Harmonized as EN 60376.
IEC 60480 NOTE Harmonized as EN 60480.
IEC 60836 NOTE Harmonized as EN 60836.
IEC 60867 NOTE Harmonized as EN 60867.
EN IEC/IEEE 65700:2018 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60050 Series International Electrotechnical Vocabulary - -
IEC 60060-1 2010 High-voltage test techniques - EN 60060-1 2010
Part 1: General definitions and test
requirements
IEC 60071-1 - Insulation co-ordination - EN 60071-1 -
Part 1: Definitions, principles and rules
IEC 60071-5 - Insulation co-ordination - EN 60071-5 -
Part 5: Procedures for high-voltage direct
current (HVDC) converter stations
IEC 60076-1 - Power transformers - Part 1: General EN 60076-1 -
IEC 60076-2 - Power transformers - Part 2: Temperature EN 60076-2 -
rise for liquid-immersed transformers
IEC 60076-7 - Power transformers - Part 7: Loading guide - -
for oil-immersed power transformers
IEC 60137 2008 Insulated bushings for alternating voltages EN 60137 2008
above 1 000 V
IEC 60270 - High-voltage test techniques - Partial EN 60270 -
discharge measurements
IEC 60296 - Fluids for electrotechnical applications - EN 60296 -
Unused mineral insulating oils for
transformers and switchgear
Specification of technical grade sulfur
IEC 60376 - EN 60376 -
hexafluoride (SF6) for use in electrical
equipment
IEC 60480 - Guidelines for the checking and treatment EN 60480 -
of sulphur hexafluoride (SF6) taken from
electrical equipment and specification for
its re-use
EN IEC/IEEE 65700:2018 (E)
Publication Year Title EN/HD Year
IEC 60836 - Specifications for unused silicone EN 60836 -
insulating liquids for electrotechnical
purposes
IEC 60867 - Insulating liquids - Specifications for EN 60867 -
unused liquids based on synthetic aromatic
hydrocarbons
IEC 61245 - Artificial pollution tests on high-voltage - -
insulators to be used on d.c. systems
IEC 61378-2 - Convertor transformers - Part 2: EN 61378-2 -
Transformers for HVDC applications
IEC 61462 - Composite hollow insulators - Pressurized EN 61462 -
and unpressurized insulators for use in
electrical equipment with rated voltage
greater than 1 000 V - Definitions, test
methods, acceptance criteria and design
recommendations
IEC 62155 - Hollow pressurized and unpressurized EN 62155 -
ceramic and glass insulators for use in
electrical equipment with rated voltages
greater than 1 000 V
CISPR 16-1 Series Specification for radio disturbance and EN 55016-1 Series
immunity measuring apparatus and
methods
CISPR 18-2 - Radio interference characteristics of - -
overhead power lines and high-voltage
equipment - Part 2: Methods of
measurement and procedure for
determining limits
IEEE Std 2004 IEEE General Requirements and Test - -
TM
C57.19.00 Procedures for Outdoor Apparatus
Bushings (ANSI)
IEEE Standards Dictionary Online
IEC/IEEE 65700-19-03
Edition 1.0 2014-07
INTERNATIONAL
STANDARD
Bushings for DC application
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XA
ICS 29.080.20 ISBN 978-2-8322-1691-0
– 2 – IEC/IEEE 65700-19-03:2014
© IEC/IEEE 2014
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and symbols . 10
3.1 Terms and definitions . 10
3.2 List of variables . 12
4 Ratings . 13
4.1 Rated voltages . 13
4.1.1 Rated continuous DC voltage . 13
4.1.2 Rated peak voltage . 13
4.2 Insulation levels . 13
4.3 Rated currents . 13
4.3.1 Pure DC applications . 13
4.3.2 Combined voltage applications . 14
4.4 Rated frequency . 14
4.5 Pollution parameters . 14
5 Operating conditions . 15
5.1 General . 15
5.2 Factors affecting the design, testing and application . 16
5.3 Altitude correction . 16
5.4 Interchangeability . 18
6 General requirements . 18
6.1 Electrical requirements . 18
6.2 Mechanical requirements . 18
6.3 Nameplate markings . 18
7 Test requirements . 19
7.1 General requirements . 19
7.2 Test Conditions . 19
7.2.1 Air temperature . 19
7.2.2 Humidity . 19
7.2.3 Correction factors . 19
7.3 Test classification . 20
7.3.1 Type (or design) tests . 20
7.3.2 Routine tests . 21
7.3.3 Special tests . 21
8 Type tests . 21
8.1 Dry power-frequency voltage withstand test with partial discharge
measurement . 21
8.1.1 Applicability . 21
8.1.2 Test method and requirements . 22
8.1.3 Acceptance . 22
8.2 Dry lightning impulse voltage withstand test (BIL) . 22
8.2.1 Applicability . 22
8.2.2 Test method and requirements . 22
IEC/IEEE 65700-19-03:2014 – 3 –
© IEC/IEEE 2014
8.2.3 Acceptance . 22
8.3 Dry or wet switching impulse voltage withstand test (SIL) . 22
8.3.1 Applicability . 22
8.3.2 Test method and requirements . 23
8.3.3 Acceptance . 23
8.4 Electromagnetic compatibility tests (EMC) . 23
8.4.1 Emission test . 23
8.4.2 Immunity test .
...