|
SLOVENSKI STANDARD
01-november-2022
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v
katalogih procesne opreme - 32. del: Seznam lastnosti za I/O module za
elektronsko izmenjavo podatkov
Industrial-process measurement and control - Data structures and elements in process
equipment catalogues - Part 32: Lists of properties (LOP) for I/O modules for electronic
data exchange
Mesure et commande des processus industriels - Structures de données et éléments
dans les catalogues d’équipement de processus - Partie 32: Listes des propriétés (LOP)
pour les modules d'E/S pour l'échange électronique des données
Ta slovenski standard je istoveten z: prEN IEC 61987-32:2022
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
65E/934/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61987-32 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-09-16 2022-12-09
SUPERSEDES DOCUMENTS:
65E/869/CD, 65E/896A/CC
IEC SC 65E : DEVICES AND INTEGRATION IN ENTERPRISE SYSTEMS
SECRETARIAT: SECRETARY:
United States of America Mr Donald (Bob) Lattimer
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 65,SC 65A,SC 65B,SC 65C
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Industrial-process measurement and control - Data structures and elements in process
equipment catalogues - Part 32: Lists of properties (LOP) for I/O modules for electronic data
exchange
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
– 2 – IEC 61987-32 CDV © IEC 2022
1 CONTENTS
3 FOREWORD . 3
4 INTRODUCTION . 5
5 1 Scope . 6
6 2 Normative references . 6
7 3 Terms and definitions . 6
8 4 General . 7
9 4.1 Overview . 7
10 4.2 Examples of DLOP block usage . 7
11 4.2.1 DLOP for I/O modules . 7
12 Annex A (normative) Operating list of properties for I/O modules . 10
13 Annex B (normative) Device lists of properties for I/O modules . 11
14 B.1 I/O module . 11
15 Annex C (normative) Property library . 12
16 Annex D (normative) Block library for considered device types . 13
Internal
IEC 61987-32 CDV IEC: 2022 – 3 –
20 INTERNATIONAL ELECTROTECHNICAL COMMISSION
21 ____________
23 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL –
24 DATA STRUCTURES AND ELEMENTS
25 IN PROCESS EQUIPMENT CATALOGUES –
27 Part 32: Lists of properties (LOP) for I/O modules for electronic data
28 exchange
31 FOREWORD
32 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
33 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
34 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
35 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
36 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
37 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
38 in the subject dealt with may participate in this preparatory work. International, governmental and non-
39 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
40 with the International Organization for Standardization (ISO) in accordance with conditions determined by
41 agreement between the two organizations.
42 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
43 consensus of opinion on the relevant subjects since each technical committee has representation from all
44 interested IEC National Committees.
45 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
46 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
47 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
48 misinterpretation by any end user.
49 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
50 transparently to the maximum extent possible in their national and regional publications. Any divergence
51 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
52 the latter.
53 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
54 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
55 services carried out by independent certification bodies.
56 6) All users should ensure that they have the latest edition of this publication.
57 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
58 members of its technical committees and IEC National Committees for any personal injury, property damage or
59 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
60 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
61 Publications.
62 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
63 indispensable for the correct application of this publication.
64 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
65 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
66 International Standard IEC 61987-32 has been prepared by subcommittee 65E: Devices and
67 integration in enterprise systems, of IEC technical committee 65: Industrial-process
68 measurement, control and automation.
69 The text of this standard is based on the following documents:
CDV Report on voting
65E/XX/CDV 65B/XX/RVD
71 Full information on the voting for the approval of this standard can be found in the report on
72 voting indicated in the above table.
Internal
– 4 – IEC 61987-32 CDV © IEC 2022
73 The List of Properties (LOPs) given in this standard are published in the Common Data
74 Dictionary of IEC as stated in the appendices A to D. In the event that the LOPs are not yet
75 available in the CDD, they may be found temporarily in the CDD maintenance area
76 (http://std.iec.ch/cdd/iec61987/cdddev.nsf/TreeFrameset?OpenFrameSet)
77 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
78 A list of all parts in the IEC 61987 series, published under the general title Industrial-process
79 measurement and control – Data structures and elements in process equipment catalogues,
80 can be found on the IEC website.
81 The committee has decided that the contents of this publication will remain unchanged until
82 the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data
83 related to the specific publication. At this date, the publication will be
84 • reconfirmed,
85 • withdrawn,
86 • replaced by a revised edition, or
87 • amended.
89 The National Committees are requested to note that for this publication the stability date
90 is xxxx-xx.
91 THIS TEXT IS INCLUDED FOR THE INFORMATION OF THE NATIONAL COMMITTEES AND WILL BE
92 DELETED AT THE PUBLICATION STAGE.
Internal
IEC 61987-32 CDV IEC: 2022 – 5 –
95 INTRODUCTION
96 The exchange of product data between companies, business systems, engineering tools, data
97 systems within companies and, in the future, control systems (electrical, measuring and
98 control technology) can run smoothly only when both the information to be exchanged and the
99 use of this information has been clearly defined.
100 Prior to this standard, requirements on process control devices and systems were specified by
101 customers in various ways when suppliers or manufacturers were asked to quote for suitable
102 equipment. The suppliers in their turn described the devices according to their own
103 documentation schemes, often using different terms, structures and media (paper, databases,
104 CDs, e-catalogues, etc.). The situation was similar in the planning and development process,
105 with device information frequently being duplicated in a number of different information
106 technology (IT) systems.
107 Any method that is capable of recording all existing information only once during the planning
108 and ordering process and making it available for further processing, gives all parties involved
109 an opportunity to concentrate on the essentials. A precondition for this is the standardization
110 of both the descriptions of the objects and the exchange of information.
111 This standard series proposes a method for standardization which will help both suppliers and
112 users of measuring equipment to optimize workflows both within their own companies and in
113 their exchanges with other companies. Depending on their role in the process, engineering
114 firms may be considered here to be either users or suppliers.
115 The method specifies measuring equipment by means of blocks of properties. These blocks
116 are compiled into lists of properties (LOPs), each of which describes a specific equipment
117 (device) type. This standard series covers both properties that may be used in an inquiry or a
118 proposal and detailed properties required for integration of the equipment in computer
119 systems for other tasks.
120 IEC 61987-10 defines structure elements for constructing lists of properties for electrical and
121 process control equipment in order to facilitate automatic data exchange between any two
122 computer systems in any possible workflow, for example engineering, maintenance or
123 purchasing workflow and to allow both the customers and the suppliers of the equipment to
124 optimize their processes and workflows. IEC 61987-10 also provides the data model for
125 assembling the LOPs.
126 IEC 61987-11 specifies the generic structure for operating and device lists of properties
127 (OLOPs and DLOPs) It lays down the framework for further parts of IEC 61987 in which
128 complete LOPs for device types measuring a given physical variable and using a particular
129 measuring principle will be specified. The generic structure may also serve as a basis for the
130 specification of LOPs for other industrial-process control instrument types such as control
131 valves and signal processing equipment.
132 IEC 61987-31 concerns infrastructure devices, i.e. devices mostly to be found in the switching
133 room and the control room. It provides a classification, a generic DLOP and an OLOP for a
134 range of device types of this device group.
135 IEC 61987-32 concerns I/O modules. It provides an OLOP for I/O modules that can also be
136 used for other infrastructure devices and a DLOP for I/O modules that can be used for input
137 modules, output modules and combined input/output modules of various types.
Internal
– 6 – IEC 61987-32 CDV © IEC 2022
139 INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL –
140 DATA STRUCTURES AND ELEMENTS
141 IN PROCESS EQUIPMENT CATALOGUES –
143 Part 32: Lists of properties (LOP) for I/O modules for electronic data
144 exchange
146 1 Scope
147 This part of IEC 61987 provides
...