|
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stecker, Steckdosen und Schiffssteckvorrichtungen für Hochspannungs-Landanschlusssysteme (HVSC-Systeme) - Teil 2: Anforderungen an die Austauschbarkeit von Steckvorrichtungen, die an verschiedenen Schiffstypen anzuwenden sindPrises de courant et connecteurs de navires pour les systèmes haute tension de raccordement des navires à quai - Partie 2: Règles dimensionnelles de compatibilité et d’interchangeabilité pour les appareils destinés à être utilisés par divers types de naviresPlugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships29.120.30Plugs, socket-outlets, couplersICS:Ta slovenski standard je istoveten z:EN IEC 62613-2:2018SIST EN 62613-2:2018en,fr,de01-junij-2018SIST EN 62613-2:2018SLOVENSKI
STANDARD
SIST EN 62613-2:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN IEC 62613-2
March 2018 ICS 29.120.30
English Version
Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) - Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships (IEC 62613-2:2016)
Prises de courant et connecteurs de navires pour les systèmes haute tension de raccordement des navires à quai - Partie 2: Règles dimensionnelles de compatibilité et d'interchangeabilité pour les appareils destinés à être utilisés par divers types de navires (IEC 62613-2:2016)
Stecker, Steckdosen und Schiffssteckvorrichtungen für Hochspannungs-Landanschlusssysteme (HVSC-Systeme) - Teil 2: Anforderungen an die Austauschbarkeit von Steckvorrichtungen, die an verschiedenen Schiffstypen anzuwenden sind (IEC 62613-2:2016) This European Standard was approved by CENELEC on 2018-03-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62613-2:2018 E SIST EN 62613-2:2018
The following dates are fixed:
• latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-03-05 • latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2021-03-05
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association.
Endorsement notice The text of the International Standard IEC 62613-2:2016 was approved by CENELEC as a European Standard without any modification. SIST EN 62613-2:2018
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2
Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Annex ZA of EN 62613-1:2018 applies, except as follows:
Publication Year Title EN/HD Year Addition: IEC 62613-1 2011
Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-Systems) -
Part 1: General requirements EN 62613-1 2018
SIST EN 62613-2:2018
SIST EN 62613-2:2018
IEC 62613-2 Edition 2.0 2016-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Plugs, socket-outlets and ship couplers for high-voltage shore connection systems (HVSC-systems) –
Part 2: Dimensional compatibility and interchangeability requirements for accessories to be used by various types of ships
Prises de courant et connecteurs de navires pour les systèmes haute tension de raccordement des navires à quai –
Partie 2: Règles dimensionnelles de compatibilité et d’interchangeabilité pour les appareils destinés à être utilisés par divers types de navires
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 29.120.30
ISBN 978-2-8322-3715-1
– 2 – IEC 62613-2:2016 © IEC 2016 CONTENTS FOREWORD . 4 INRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms and definitions . 7 4 General . 7 5 Standard ratings . 7 6 Classification . 7 7 Marking . 7 8 Dimensions. 7 9 Protection against electric shock . 8 10 Provision for Earthing . 8 11 Terminals and terminations . 8 12 Locking devices and interlocks . 8 13 Resistance to ageing of rubber and thermoplastic material . 8 14 General construction . 8 15 Construction of socket-outlets and ship inlets . 8 16 Construction of ship connectors . 8 17 Construction of plugs . 8 18 Degrees of protection . 8 19 Insulation resistance, dielectric withstand and partial discharge tests . 8 20 Normal operation . 9 21 Temperature rise . 9 22 Flexible cables and their connection . 9 23 Mechanical strength . 9 24 Screws, current-carrying parts and connections . 9 25 Resistance to heat, to fire and to tracking . 9 26 Corrosion and resistance to rusting . 9 27 Conditional short-circuit current withstand test . 9 28 Electromagnetic compatibility . 9 Annex A (normative)
Standard sheets A: 7,2 kV 350A three-phase accessories with two IP0 pilot contacts . 10 A.1 Socket-outlet. 10 A.2 Plug top . 11 A.3 Ship connector top . 12 A.4 Ship inlet . 13 Annex B (normative)
Standard sheets B:
7,2 kV 350A three-phase accessories with two IP2X pilot contacts . 14 B.1 Socket-outlet. 14 B.2 Plug top . 15 B.3 Ship connector top . 16 B.4 Ship inlet . 17 SIST EN 62613-2:2018
IEC 62613-2:2016 © IEC 2016 – 3 – Annex C (normative)
Standard sheets C: 7,2 kV 350 A three-phase accessories with three IP2X pilot contacts . 18 C.1 Socket-outlet. 18 C.2 Plug top . 19 C.3 Ship connector top . 20 C.4 Ship inlet . 21 Annex D (normative)
Standard sheets D: 12 kV 500 A three-phase accessories with two IP0 pilot contacts . 22 D.1 Socket-outlet. 22 D.2 Plug top . 23 D.3 Ship connector top . 24 D.4 Ship inlet . 25 Annex E (normative)
Standard sheets E:
12 kV 500 A three-phase accessories with two IP2X Pilot contacts . 26 E.1 Socket-outlet. 26 E.2 Plug top . 27 E.3 Ship connector top . 28 E.4 Ship inlet . 29 Annex F (normative)
Standard sheets F 12 kV 500 A three-phase accessories with three IP2X pilot contacts . 30 F.1 Socket-outlet. 30 F.2 Plug top . 31 F.3 Ship connector top . 32 F.4 Ship inlet . 33 Annex G (normative)
Standard sheets G: 12 kV 500 A three-phase accessories with two pilot contacts .
...