|
SLOVENSKI STANDARD
01-oktober-2021
Nadomešča:
SIST EN 60799:2000
Električni pribor - Priključni kabli in povezava priključnih kablov (IEC 60799:2018)
Electrical accessories - Cord sets and interconnection cord sets (IEC 60799:2018)
Elektrisches Installationsmaterial - Geräteanschlußleitungen und Weiterverbindungs-
Geräteanschlußleitungen (IEC 60799:2018)
Petit appareillage électrique - Cordons-connecteurs et cordons d'interconnexion (IEC
60799:2018)
Ta slovenski standard je istoveten z: EN IEC 60799:2021
ICS:
29.060.20 Kabli Cables
29.120.30 Vtiči, vtičnice, spojke Plugs, socket-outlets,
couplers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60799
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2021
ICS 29.060.20; 29.120.30 Supersedes EN 60799:1998 and all of its amendments
and corrigenda (if any)
English Version
Electrical accessories - Cord sets and interconnection cord sets
(IEC 60799:2018)
Petit appareillage électrique - Cordons-connecteurs et Elektrisches Installationsmaterial - Geräteanschlußleitungen
cordons d'interconnexion und Weiterverbindungs-Geräteanschlußleitungen
(IEC 60799:2018) (IEC 60799:2018)
This European Standard was approved by CENELEC on 2018-04-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60799:2021 E
European foreword
The text of document 23G/393/FDIS, future edition 3 of IEC 60799, prepared by IEC/TC 23G
"Appliance couplers, of IEC technical committee 23: Electrical accessories" was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN IEC 60799:2021.
The following dates are fixed:
• latest date by which this document has to be (dop) 2021-09-19
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2024-03-19
conflicting with this document have to be
withdrawn
This document supersedes EN 60799:1998 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60799:2018 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC/TR 60083 - Plugs and socket-outlets for domestic - -
and similar general use standardized in
member countries of IEC
-
IEC 60227 series Polyvinyl chloride insulated cables of
-
rated voltages up to and including
450/750 V
IEC 60245 series Rubber insulated cables - Rated voltages -
-
up to and including 450/750
IEC 60320-1 - EN 60320-1 -
Appliance couplers for household and
similar general purposes - Part 1:
General requirements
IEC 60320-2-3 - Appliance couplers for household EN IEC 60320-2-3 -
and similar general purposes -- Part
2-3: Appliance coupler with a degree
of protection higher than IPX0
IEC 60884-1 - Plugs and socket-outlets for household - -
and similar purposes -- Part 1: General
requirements
IEC 61140 - Protection against electric shock - EN 61140 -
Common aspects for installation and
equipment
IEC 60799
Edition 3.0 2018-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electrical accessories – Cord sets and interconnection cord sets
Petit appareillage électrique – Cordons-connecteurs et cordons-connecteurs
d’interconnexion
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.20; 29.120.30 ISBN 978-2-8322-5419-6
– 2 – IEC 60799:2018 © IEC 2018
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 6
5 Requirements . 7
5.1 Requirements for component parts . 7
5.2 Requirements for the assembly . 7
5.2.1 Rated voltage . 7
5.2.2 Rated current . 7
5.2.3 Class of equipment . 7
5.2.4 Marking . 7
5.2.5 Type of cord . 8
6 Continuity and polarity . 8
7 EMC requirements . 9
7.1 Immunity for cord sets and interconnection cord sets not incorporating
electronic components . 9
7.2 Emission for cord sets and interconnection cord sets not incorporating
electronic components . 9
Annex A (normative) Routine tests for factory-wired cord sets and interconnection
cord sets related to safety (protection against electric shock and correct polarity) . 10
A.1 General . 10
A.2 Polarized systems: phase (L) and neutral (N) – Correct connection . 10
A.3 Earth (PE) continuity . 11
A.4 Short-circuit/wrong connection and reduction in creepage distance and
clearance . 11
A.4.1 Accessible surface safety check . 11
A.4.2 Short-circuit/wrong connection . 11
Table 1 – Types of cords for cord sets and interconnection cord sets . 8
Table A.1 – Test overview . 10
IEC 60799:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL ACCESSORIES – CORD SETS
AND INTERCONNECTION CORD SETS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60799 has been prepared by subcommittee 23G: Appliance
couplers, of IEC technical committee 23: Electrical accessories.
This third edition cancels and replaces the second edition published in 1998. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) alignment with IEC 60320-1:2015;
b) extension to include appliance couplers in accordance with IEC 60320-2-3:– .
__________
Under preparation. Stage at the time of publication: IEC/FDIS 60320-2-3:2018.
– 4 – IEC 60799:2018 © IEC 2018
The text of this International Standard is based on the following documents:
FDIS Report on voting
23G/393/FDIS 23G/397/RVD
Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This document has been drafted in accordance wit
...