EN 60320-1:2015/A1:2021

Appliance couplers for household and similar general purposes - Part 1: General requirements

EN 60320-1:2015/A1:2021

Name:EN 60320-1:2015/A1:2021   Standard name:Appliance couplers for household and similar general purposes - Part 1: General requirements
Standard number:EN 60320-1:2015/A1:2021   language:English language
Release Date:18-Mar-2021   technical committee:CLC/SR 23G - Appliance couplers
Drafting committee:IEC/SC 23G - IEC_SC_23G   ICS number:29.120.30 - Plugs, socket-outlets, couplers

SLOVENSKI STANDARD
01-oktober-2021
Aparatne spojke za gospodinjstva in podobne splošne namene - 1. del: Splošne
zahteve (IEC 60320-1:2015/A1:2018)
Appliance couplers for household and similar general purposes - Part 1: General
requirements (IEC 60320-1:2015/A1:2018)
Gerätesteckvorrichtungen für den Hausgebrauch und ähnliche allgemeine Zwecke –Teil
1: Allgemeine Anforderungen (IEC 60320-1:2015/A1:2018)
Connecteurs pour usages domestiques et usages généraux analogues - Partie 1:
Exigences générales (IEC 60320-1:2015/A1:2018)
Ta slovenski standard je istoveten z: EN 60320-1:2015/A1:2021
ICS:
29.120.30 Vtiči, vtičnice, spojke Plugs, socket-outlets,
couplers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60320-1:2015/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2021
ICS 29.120.30
English Version
Appliance couplers for household and similar general purposes -
Part 1: General requirements
(IEC 60320-1:2015/A1:2018)
Connecteurs pour usages domestiques et usages généraux Gerätesteckvorrichtungen für den Hausgebrauch und
analogues - Partie 1: Exigences générales ähnliche allgemeine Zwecke -Teil 1: Allgemeine
(IEC 60320-1:2015/A1:2018) Anforderungen
(IEC 60320-1:2015/A1:2018)
This amendment A1 modifies the European Standard EN 60320-1:2015; it was approved by CENELEC on 2018-10-10. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60320-1:2015/A1:2021 E

European foreword
The text of document 23G/405/FDIS, future IEC 60320-1:2015/A1, prepared by SC 23G "Appliance
couplers" of IEC/TC 23 "Electrical accessories" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60320-1:2015/A1:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-09-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-03-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60320-1:2015/A1:2018 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27