|
SLOVENSKI STANDARD
01-julij-2018
Specifikacije za posebne vrste navijalnih žic - 73. del: Aluminijasta žica s
pravokotnim prerezom, emajlirana s poliamidimidom, prekrita s poliestrom ali
poliesterimidom, razred 200 (IEC 60317-73:2018)
Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide
overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200 (IEC
60317-73:2018)
Ta slovenski standard je istoveten z: EN IEC 60317-73:2018
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60317-73
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2018
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 73:
Polyester or polyesterimide overcoated with polyamide-imide
enamelled rectangular aluminium wire, class 200
(IEC 60317-73:2018)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 73: Fil de section rectangulaire émaillé en aluminium Wickeldrähten - Teil 73: Polyester oder Polyesterimid
revêtu de polyester ou de polyesterimide ainsi que de beschichteter, mit Polyamidimid lackierter Flachdraht aus
polyamide-imide, de classe 200 Aluminium, Klasse 200
(IEC 60317-73:2018) (IEC 60317-73:2018)
This European Standard was approved by CENELEC on 2018-04-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60317-73:2018 E
European foreword
The text of document 55/1634/FDIS, future edition 1 of IEC 60317-73, prepared by IEC/TC 55
"Winding wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be (dop) 2019-01-03
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-04-03
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60317-73:2018 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60264 series NOTE Harmonized as EN 60264 series.
IEC 60317 series NOTE Harmonized as EN 60317 series.
IEC 60851 series NOTE Harmonized as EN 60851 series.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60317-0-9 2015 Specifications for particular types of EN 60317-0-9 2015
winding wires - Part 0-9: General
requirements - Enamelled rectangular
aluminium wire
IEC 60317-73
Edition 1.0 2018-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Specifications for particular types of winding wires –
Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled
rectangular aluminium wire, class 200
Spécifications pour types particuliers de fils de bobinage –
Partie 73: Fil de section rectangulaire émaillé en aluminium revêtu de polyester
ou de polyesterimide ainsi que de polyamide-imide, de classe 200
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10 ISBN 978-2-8322-5416-5
– 2 – IEC 60317-73:2018 © IEC 2018
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, general notes and appearance . 6
3.1 Terms and definitions . 6
3.2 General notes . 7
3.2.1 Methods of test . 7
3.2.2 Winding wire . 7
3.3 Appearance . 7
4 Dimensions. 7
5 Electrical resistance . 7
6 Elongation . 7
7 Springiness . 7
8 Flexibility and adherence . 7
9 Heat shock . 7
10 Cut-through . 7
11 Resistance to abrasion . 7
12 Resistance to solvents . 8
13 Breakdown voltage . 8
14 Continuity of insulation . 8
15 Temperature index . 8
16 Resistance to refrigerants . 8
17 Solderability . 8
18 Heat or solvent bonding . 8
19 Dielectric dissipation factor . 8
20 Resistance to transformer oil . 8
21 Loss of mass .
...