|
SLOVENSKI STANDARD
01-junij-2021
Nadomešča:
SIST EN 60793-2-40:2016
Optična vlakna - 2-40. del: Specifikacije izdelka - Področna specifikacija za
mnogorodovna vlakna kategorije A4 (IEC 60793-2-40:2021)
Optical fibres - Part 2-40: Product specifications - Sectional specification for category A4
multimode fibres (IEC 60793-2-40:2021)
Lichtwellenleiter - Teil 2-40: Produktspezifikationen - Rahmenspezifikation für
Mehrmodenfasern der Kategorie A4 (IEC 60793-2-40:2021)
Fibres optiques - Partie 2-40: Spécifications de produits - Spécification intermédiaire
pour les fibres multimodales de la catégorie A4 (IEC 60793-2-40:2021)
Ta slovenski standard je istoveten z: EN IEC 60793-2-40:2021
ICS:
33.180.10 (Optična) vlakna in kabli Fibres and cables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60793-2-40
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 33.180.10 Supersedes EN 60793-2-40:2016 and all of its
amendments and corrigenda (if any)
English Version
Optical fibres - Part 2-40: Product specifications - Sectional
specification for category A4 multimode fibres
(IEC 60793-2-40:2021)
Fibres optiques - Partie 2-40: Spécifications de produits - Lichtwellenleiter - Teil 2-40: Produktspezifikationen -
Spécification intermédiaire pour les fibres multimodales de Rahmenspezifikation für Mehrmodenfasern der Kategorie
catégorie A4 A4
(IEC 60793-2-40:2021) (IEC 60793-2-40:2021)
This European Standard was approved by CENELEC on 2021-04-01. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60793-2-40:2021 E
European foreword
The text of document 86A/1943/CDV, future edition 5 of IEC 60793-2-40, prepared by SC 86A "Fibres
and cables" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 60793-2-40:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-01-01
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-04-01
document have to be withdrawn
This document supersedes EN 60793-2-40:2016 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60793-2-40:2021 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60793-1-1 NOTE Harmonized as EN 60793-1-1
IEC 60793-2 NOTE Harmonized as EN IEC 60793-2
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-1 - Environmental testing - Part 1: General EN 60068-1 -
and guidance
IEC 60793-1-20 - Optical fibres - Part 1-20: Measurement EN 60793-1-20 -
methods and test procedures - Fibre
geometry
IEC 60793-1-22 - Optical fibres - Part 1-22: Measurement EN 60793-1-22 -
methods and test procedures - Length
measurement
IEC 60793-1-40 2019 Optical fibres - Part 1-40: Attenuation EN IEC 60793-1-40 2019
measurement methods
IEC 60793-1-41 - Optical fibres - Part 1-41: Measurement EN 60793-1-41 -
methods and test procedures - Bandwidth
IEC 60793-1-42 - Optical fibres - Part 1-42: Measurement EN 60793-1-42 -
methods and test procedures - Chromatic
dispersion
IEC 60793-1-43 - Optical fibres - Part 1-43: Measurement EN 60793-1-43 -
methods and test procedures - Numerical
aperture measurement
IEC 60793-1-46 - Optical fibres - Part 1-46: Measurement EN 60793-1-46 -
methods and test procedures - Monitoring
of changes in optical transmittance
IEC 60793-1-47 - Optical fibres – Part 1-47: Measurement EN IEC 60793-1-47 -
methods and test procedures –
Macrobending loss
IEC 60793-1-50 - Optical fibres - Part 1-50: Measurement EN 60793-1-50 -
methods and test procedures - Damp heat
(steady state) tests
IEC 60793-1-51 - Optical fibres - Part 1-51: Measurement EN 60793-1-51 -
methods and test procedures - Dry heat
(steady state) tests
Publication Year Title EN/HD Year
IEC 60793-1-52 - Optical fibres - Part 1-52: Measurement EN 60793-1-52 -
methods and test procedures - Change of
temperature tests
IEC 60793-2-40
Edition 5.0 2021-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Optical fibres –
Part 2-40: Product specifications – Sectional specification for category A4
multimode fibres
Fibres optiques –
Partie 2-40: Spécifications de produits – Spécification intermédiaire pour les
fibres multimodales de catégorie A4
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.10 ISBN 978-2-8322-9437-6
– 2 – IEC 60793-2-40:2021 © IEC 2021
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 8
3 Terms and definitions . 8
4 Specifications . 9
4.1 Dimensional requirements . 9
4.2 Mechanical requirements . 10
4.2.1 General . 10
4.2.2 Tensile load test . 10
4.3 Transmission requirements . 11
4.4 Environmental requirements . 12
4.4.1 General . 12
4.4.2 Mechanical environmental requirements . 13
4.4.3 Transmission environmental requirements . 13
Annex A (normative) Family specifications for subcategory A4a multimode fibres . 15
A.1 General . 15
A.2 Dimensional requirements . 15
A.3 Mechanical requirements . 15
A.4 Transmission requirements . 15
A.5 Environmental requirements . 16
Annex B (normative) Family specifications for subcategory A4b multimode fibres . 17
B.1 General . 17
B.2 Dimensional requirements . 17
B.3 Mechanical requirements . 17
B.4 Transmission requirements . 17
B.5 Environmental requirements . 18
Annex C (normative) Family specifications for subcategory A4c multimode fibres . 19
C.1 General . 19
C.2 Dimensional requirements . 19
C.3 Mechanical requirements . 19
C.4 Transmission requirements . 19
C.5 Environmental requirements . 20
Annex D (normative) Family specifications for subcategory A4d multimode fibres . 21
D.1 General . 21
D.2 Dimensional requirements . 21
D.3 Mechanical requirements . 21
D.4 Transmission requirements . 21
D.5 Environmental requirements . 22
Annex E (normative) Family specifications for subcategory A4e multimode fibres . 23
E.1 General . 23
E.2 Dimensional requirements . 23
E.3 Mechanical requirements . 23
E.4 Transmission requirements . 23
E.5 Environmental requirements . 24
Annex F (normative) Family specifications for subcategory A4f multimode fibres . 25
IEC 60793-2-40:2021 © IEC 2021 – 3 –
Annex G (normative) Family specifications for subcategory A4g multimode fibres . 26
G.1 General . 26
G.2 Dimensional requirements . 26
G.3 Mechanical requirements . 26
G.4 Transmission requirements . 26
G.5 Environmental requirements . 27
Annex H (normative) Family specifications for subcategory A4h multimode fibres . 28
H.1 General . 28
H.2 Dimensional requirements . 28
H.3 Mechanical requirements . 28
H.4 Transmission requirements .
...