|
SLOVENSKI STANDARD
01-junij-2021
Nadomešča:
SIST EN 61215-2:2017
SIST EN 61215-2:2017/AC:2017
SIST EN 61215-2:2017/AC:2018
Prizemni fotonapetostni (PV) moduli - Ocena zasnove in odobritev tipa - 2. del:
Preskusni postopki
Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 2:
Test procedures
Terrestrische Photovoltaik(PV)-Module - Bauarteignung und Bauartzulassung - Teil 2:
Prüfverfahren
Modules photovoltaïques (PV) pour applications terrestres - Qualification de la
conception et homologation - Partie 2: Procédures d'essai
Ta slovenski standard je istoveten z: EN IEC 61215-2:2021
ICS:
27.160 Sončna energija Solar energy engineering
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61215-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 27.160 Supersedes EN 61215-2:2017 and all of its amendments
and corrigenda (if any)
English Version
Terrestrial photovoltaic (PV) modules - Design qualification and
type approval - Part 2: Test procedures
(IEC 61215-2:2021)
Modules photovoltaïques (PV) pour applications terrestres - Terrestrische Photovoltaik(PV)-Module - Bauarteignung und
Qualification de la conception et homologation - Partie 2: Bauartzulassung - Teil 2: Prüfverfahren
Procédures d'essai (IEC 61215-2:2021)
(IEC 61215-2:2021)
This European Standard was approved by CENELEC on 2021-03-31. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61215-2:2021 E
European foreword
The text of document 82/1829/FDIS, future edition 2 of IEC 61215-2, prepared by IEC/TC 82 "Solar
photovoltaic energy systems" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 61215-2:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-12-31
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-03-31
document have to be withdrawn
This document supersedes EN 61215-2:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61215-2:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 62506 NOTE Harmonized as EN 62506
IEC 62938:2020 NOTE Harmonized as EN IEC 62938:2020 (not modified)
IEC 62941 NOTE Harmonized as EN IEC 62941
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-1 - Environmental testing - Part 1: General EN 60068-1 -
and guidance
IEC 60068-2-21 - Environmental testing - Part 2-21: Tests - EN 60068-2-21 -
Test U: Robustness of terminations and
integral mounting devices
IEC 60068-2-78 2012 Environmental testing - Part 2-78: Tests - EN 60068-2-78 2013
Test Cab: Damp heat, steady state
IEC 60891 - Photovoltaic devices - Procedures for EN 60891 -
temperature and irradiance corrections to
measured I-V characteristics
IEC 60904-1 - Photovoltaic devices - Part 1: EN IEC 60904-1 -
Measurement of photovoltaic current-
voltage characteristics
IEC 60904-1-1 - Photovoltaic devices - Part 1-1: EN 60904-1-1 -
Measurement of current-voltage
characteristics of multi-junction
photovoltaic (PV) devices
IEC/TS 60904-1-2 - Photovoltaic devices - Part 1-2: - -
Measurement of current-voltage
characteristics of bifacial photovoltaic (PV)
devices
IEC 60904-2 - Photovoltaic devices - Part 2: EN 60904-2 -
Requirements for photovoltaic reference
devices
IEC 60904-3 - Photovoltaic devices - Part 3: EN IEC 60904-3 -
Measurement principles for terrestrial
photovoltaic (PV) solar devices with
reference spectral irradiance data
IEC 60904-7 - Photovoltaic devices - Part 7: Computation EN IEC 60904-7 -
of the spectral mismatch correction for
measurements of photovoltaic devices
Publication Year Title EN/HD Year
IEC 60904-8 - Photovoltaic devices - Part 8: EN 60904-8 -
Measurement of spectral responsivity of a
photovoltaic (PV) device
IEC 60904-9 2020 Photovoltaic devices - Part 9: Classification EN IEC 60904-9 2020
of solar simulator characteristics
IEC 60904-10 - Photovoltaic devices - Part 10: Methods of EN IEC 60904-10 -
linear dependence and linearity
measurements
IEC/TR 60904-14 - Photovoltaic devices - Part 14: Guidelines - -
for production line measurements of single-
junction PV module maximum power
output and reporting at standard test
conditions
IEC 61140 - Protection against electric shock - EN 61140 -
Common aspects for installation and
equipment
IEC 61215-1 2021 Terrestrial photovoltaic (PV) modules - EN IEC 61215-1 2021
Design qualification and type approval -
Part 1: Test requirements
IEC 61215-1-1 - Terrestrial photovoltaic (PV) modules - EN IEC 61215-1-1 -
Design qualification and type approval -
Part 1-1: Special requirements for testing
of crystalline silicon photovoltaic (PV)
modules
IEC 61730-1 2016 Photovoltaic (PV) module safety EN IEC 61730-1 2018
qualification - Part 1: Requirements for
construction
- - /AC:2018-06
IEC 61730-2 - Photovoltaic (PV) module safety EN IEC 61730-2 -
qualification - Part 2: Requirements for
testing
IEC/TS 61836 - Solar photovoltaic energy systems - - -
Terms, definitions and symbols
IEC/TS 62782 - Photovoltaic (PV) modules - Cyclic - -
(dynamic) mechanical load testing
IEC 62790 - Junction boxes for photovoltaic modules - EN 62790 -
Safety requirements and tests
IEC/TS 62804-1 2015 Photovoltaic (PV) modules - Test methods - -
for the detection of potential-induced
degradation - Part 1: Crystalline silicon
IEC TS 63163 — Terrestrial photovoltaic (PV) modules for
consumer products – Design qualification
and type approval
Under preparation. Stage at the time of publication: ADTS.
IEC 61215-2
Edition 2.0 2021-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Terrestrial photovoltaic (PV) modules – Design qualification and type approval –
Part 2: Test procedures
Modules photovoltaïques (PV) pour applications terrestres – Qualification de la
conception et homologation –
Partie 2: Procédures d'essai
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 27.160 ISBN 978-2-8322-9394-2
– 2 – IEC 61215-2:2021 © IEC 2021
CONTENTS
FOREWORD . 6
INTRODUCTION . 8
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 11
4 Test procedures . 12
4.1 Visual inspection (MQT 01) . 12
4.1.1 Purpose . 12
4.1.2 Procedure . 12
4.1.3 Requirements . 12
4.2 Maximum power determination (MQT 02) . 12
4.2.1 Purpose . 12
4.2.2 Apparatus . 12
4.2.3 Procedure . 13
4.3 Insulation test (MQT 03) . 13
4.3.1 Purpose . 13
4.3.2 Apparatus . 14
4.3.3 Test conditions . 14
4.3.4 Procedure . 14
4.3.5 Test requirements . 15
4.4 Measurement of temperature coefficients (MQT 04) . 15
4.5 Placeholder section, formerly NMOT . 15
4.6 Performance at STC (MQT 06.1) . 15
4.6.1 Purpose . 15
4.6.2 Apparatus . 15
4.6.3 Procedure for measuring at STC (MQT 06.1) . 16
4.7 Performance at low irradiance (MQT 07) . 16
4.7.1 Purpose . 16
4.7.2 Apparatus . 16
4.7.3 Procedure . 17
4.8 Outdoor exposure test (MQT 08) . 17
4.8.1 Purpose . 17
4.8.2 Apparatus . 17
4.8.3 Procedure . 17
4.8.4 Final measurements . 18
4.8.5 Requirements . 18
4.9 Hot-spot endurance test (MQT 09) . 18
4.9.1 Purpose . 18
4.9.2 Hot-spot effect . 18
4.9.3 Classification of cell interconnection . 19
4.9.4 Apparatus . 20
4.9.5 Proced
...