|
SLOVENSKI STANDARD
01-julij-2021
Nadomešča:
SIST EN 61800-2:2015
Električni pogonski sistemi z nastavljivo hitrostjo - 2. del: Splošne zahteve - Ocena
specifikacij naznačenih vrednosti za izmenične pogonske sisteme z nastavljivo
hitrostjo (IEC 61800-2:2021)
Adjustable speed electrical power drive systems - Part 2: General requirements - Rating
specifications for adjustable speed AC power drive systems
(IEC 61800-2:2021)
Drehzahlveränderbare elektrische Antriebe - Teil 2: Allgemeine Anforderungen -
Festlegungen für die Bemessung von Niederspannungs-Wechselstrom-
Antriebssystemen mit einstellbarer Frequenz (IEC 61800-2:2021)
Entraînements électriques de puissance à vitesse variable - Partie 2: Exigences
générales - Spécifications de dimensionnement pour entraînements électriques de
puissance à vitesse variable en courant alternatif (IEC 61800-2:2021)
Ta slovenski standard je istoveten z: EN IEC 61800-2:2021
ICS:
29.160.30 Motorji Motors
29.200 Usmerniki. Pretvorniki. Rectifiers. Convertors.
Stabilizirano električno Stabilized power supply
napajanje
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61800-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 29.160.30; 29.200 Supersedes EN 61800-2:2015 and all of its amendments
and corrigenda (if any)
English Version
Adjustable speed electrical power drive systems - Part 2:
General requirements - Rating specifications for adjustable
speed AC power drive systems
(IEC 61800-2:2021)
Entraînements électriques de puissance à vitesse variable - Drehzahlveränderbare elektrische Antriebe - Teil 2:
Partie 2: Exigences générales - Spécifications de Allgemeine Anforderungen - Festlegungen für die
dimensionnement pour entraînements électriques de Bemessung von Niederspannungs-Wechselstrom-
puissance à vitesse variable en courant alternatif Antriebssystemen mit einstellbarer Frequenz
(IEC 61800-2:2021) (IEC 61800-2:2021)
This European Standard was approved by CENELEC on 2021-04-07. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61800-2:2021 E
European foreword
The text of document 22G/432/FDIS, future edition 3 of IEC 61800-2, prepared by SC 22G "Adjustable
speed electric power drive systems (PDS)" of IEC/TC 22 "Power electronic systems and equipment"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-01-07
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-04-07
document have to be withdrawn
This document supersedes EN 61800-2:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61800-2:2021 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60027-3 NOTE Harmonized as EN 60027-3
IEC 60034-1 NOTE Harmonized as EN 60034-1
IEC 60034-14 NOTE Harmonized as EN IEC 60034-14
IEC 60034-18-31 NOTE Harmonized as EN 60034-18-31
IEC/TS 60034-25 NOTE Harmonized as CLC/TS 60034-25
IEC 60034-30 (series) NOTE Harmonized as EN 60034-30 (series)
IEC 60068-2-6 NOTE Harmonized as EN 60068-2-6
IEC 60068-2-52 NOTE Harmonized as EN IEC 60068-2-52
IEC 60068-2-68 NOTE Harmonized as EN 60068-2-68
IEC 60068-2-78 NOTE Harmonized as EN 60068-2-78
IEC 60076-1 NOTE Harmonized as EN 60076-1
IEC 60146 (series) NOTE Harmonized as EN 60146 (series)
IEC 60204-1 NOTE Harmonized as EN 60204-1
IEC 60364 (series) NOTE Harmonized as HD 60364 (series)
IEC 60529 NOTE Harmonized as EN 60529
IEC 60664-1 NOTE Harmonized as EN IEC 60664-1
IEC 60721 (series) NOTE Harmonized as EN 60721 (series)
IEC 60721-2-6 NOTE Harmonized as HD 478.2.6 S1
IEC 61131-2 NOTE Harmonized as EN 61131-2
IEC 61158 (series) NOTE Harmonized as EN 61158 (series)
IEC 61378 (series) NOTE Harmonized as EN 61378 (series)
IEC 61378-1 NOTE Harmonized as EN 61378-1
IEC 61439-1 NOTE Harmonized as EN 61439-1
IEC 61800-1 NOTE Harmonized as EN IEC 61800-1
IEC 61800-4:2002 NOTE Harmonized as EN 61800-4:2003 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60034 series Rotating electrical machines EN IEC 60034 series
IEC 60038 - IEC standard voltages EN 60038 -
IEC 60050-112 - International Electrotechnical Vocabulary - -
- Part 112: Quantities and units
IEC 60050-113 2011 International Electrotechnical Vocabulary - -
- Part 113: Physics for electrotechnology
IEC 60050-114 - International Electrotechnical Vocabulary - -
- Part 114: Electrochemistry
IEC 60050-151 - International Electrotechnical Vocabulary - -
- Part 151: Electrical and magnetic
devices
IEC 60050-161 - International Electrotechnical - -
Vocabulary. Chapter 161:
Electromagnetic compatibility
IEC 60050-192 - International electrotechnical vocabulary - -
- Part 192: Dependability
IEC 60050-441 - International Electrotechnical - -
Vocabulary. Switchgear, controlgear and
fuses
IEC 60050-442 - International Electrotechnical Vocabulary - -
- Part 442: Electrical accessories
IEC 60050-551 - International Electrotechnical Vocabulary - -
- Part 551: Power electronics
Publication Year Title EN/HD Year
IEC 60050-601 - International Electrotechnical - -
Vocabulary. Chapter 601: Generation,
transmission and distribution of electricity
- General
IEC 60068 series Environmental testing EN 60068 series
IEC 60068-2-27 2008 Environmental testing - Part 2-27: Tests - EN 60068-2-27 2009
Test Ea and guidance: Shock
IEC 60076 series Power transformers EN 60076 series
IEC 60076-11 - Power transformers - Part 11: Dry-type EN IEC 60076-11 -
transformers
IEC 60079 series Explosive atmospheres - -
IEC 60146-1-1 - Semiconductor converters - General EN 60146-1-1 -
requirements and line commutated
converters - Part 1-1: Specification of
basic requirements
IEC/TR 60146-1-2 - Semiconductor convertors - General - -
requirements and line commutated
convertors - Part 1-2: Application guide
IEC 60721-3-0 - Classification of environmental EN IEC 60721-3-0 -
conditions - Part 3-0: Classification of
groups of environmental parameters and
their severities - Introduction
IEC 60721-3-1 1997 Classification of environmental EN 60721-3-1 1997
conditions - Part 3: Classification of
groups of environmental parameters and
their severities - Section 1: Storage
IEC 60721-3-2 1997 Classification of environmental EN 60721-3-2 1997
conditions - Part 3: Classification of
groups of environmental parameters and
their severities - Section 2:
Transportation
IEC 60721-3-3 1994 Classification of environmental EN 60721-3-3 1995
conditions - Part 3: Classification of
groups of environmental parameters and
their severities - Section 3: Stationary
use at weatherprotected locations
+ A1 1995 - -
+ A2 1996 + A2 1997
Publication Year Title EN/HD Year
IEC 60721-3-4 1995 Classification of environmental EN 60721-3-4 1995
conditions - Part 3: Classification of
groups of environmental parameters and
their severities - Section 4: Stationary
use at non-weatherprotected locations
+ A1 1996 + A1 1997
IEC 61800-3 - Adjustable speed electrical power drive EN IEC 61800-3 -
systems - Part 3: EMC requirements and
specific test methods
IEC 61800-5-1 - Adjustable speed electrical power drive EN 61800-5-1 -
systems - Part 5-1: Safety requirements -
Electrical, thermal and energy
IEC 61800-5-2 2016 Adjustable speed electrical power drive EN 61800-5-2 2017
systems - Part 5-2: Safety requirements -
Functional
IEC/TR 61800-6 - Adjustable speed electrical power drive CLC/TR 61800-6 -
systems - Part 6: Guide for determination
of types of load duty and corresponding
current ratings
IEC 61800-7 series Adjustable speed electrical power drive EN 61800-7 series
systems - Part 7: Generic interface and
use of profiles for power drive systems
IEC 61800-7-1 - Adjustable speed electrical power drive EN 61800-7-1 -
systems - Part 7-1: Generic interface and
use of profiles for power drive systems -
Interface definition
IEC/TS 61800-8 - Adjustable speed electrical power drive - -
systems - Part 8: Specification of voltage
on the power interface
IEC 61800-9-1 - Adjustable speed electrical power drive EN 61800-9-1 -
systems - Part 9-1: Ecodesign for power
drive systems, motor starters, power
electronics and their driven applications -
General requirements for setting energy
efficiency standards for power driven
equipment using the extended product
approach (EPA) and semi analytic model
(SAM)
IEC 61800-9-2 - Adjustable speed electrical power drive EN 61800-9-2 -
systems - Part 9-2: Ecodesign for power
drive systems, motor starters, power
electronics and their driven applications -
Energy efficiency indicators for power
drive systems and motor starters
Publication Year Title EN/HD Year
IEC/TS 62578 2015 Power electronics systems and - -
equipment - Operation conditions and
characteristics of active infeed converter
(AIC) applications including design
recommendations for their emission
values below 150 kHz
IEC 61800-2
Edition 3.0 2021-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Adjustable speed electrical power drive systems –
Part 2: General requirements – Rating specifications for adjustable speed
AC power drive systems
Entraînements électriques de puissance à vitesse variable –
Partie 2: Exigences générales – Spécifications de dimensionnement pour
entraînements électriques de puissance à vitesse variable en courant alternatif
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.160.30; 29.200 ISBN 978-2-8322-9450-5
– 2 – IEC 61800-2:2021 © IEC 2021
CONTENTS
FOREWORD . 6
INTRODUCTION . 9
1 Scope . 11
2 Normative references . 12
3 Terms and definitions . 14
4 Guidance for specification of BDM/CDM/PDS and methodologies for compliance . 32
4.1 General . 32
4.2 Methodology for compliance . 32
4.2.1 Agreement between customer and manufacturer .
...