|
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Magnetni materiali - 8-11. del: Specifikacije za posamezne materiale - Amorfni trak na osnovi železa, dobavljen kot polizdelek (IEC 60404-8-11:2018)Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state (IEC 60404-8-11:2018)29.030Magnetni materialiMagnetic materialsICS:Ta slovenski standard je istoveten z:EN IEC 60404-8-11:2018SIST EN IEC 60404-8-11:2018en01-september-2018SIST EN IEC 60404-8-11:2018SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN IEC 60404-8-11
July 2018 ICS 17.220.20; 29.030
English Version
Magnetic materials - Part 8-11: Specifications for individual materials - Fe-based amorphous strip delivered in the semi-processed state (IEC 60404-8-11:2018)
Matériaux magnétiques - Partie 8-11: Spécifications pour matériaux particuliers - Bandes en alliage amorphe à base de fer livrées à l'état semi-fini (IEC 60404-8-11:2018)
Magnetische Werkstoffe - Teil 8-11: Anforderungen an einzelne Werkstoffe - eisenbasiertes, amorphes Band in nicht schlussgeglühtem Zustand (IEC 60404-8-11:2018) This European Standard was approved by CENELEC on 2018-04-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23,
B-1040 Brussels © 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60404-8-11:2018 E SIST EN IEC 60404-8-11:2018
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60404-8-11:2018 was approved by CENELEC as a European Standard without any modification. SIST EN IEC 60404-8-11:2018
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2
Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60050-121 -
International Electrotechnical Vocabulary (IEV) -
Part 121: Electromagnetism - -
IEC 60050-221 -
International Electrotechnical Vocabulary (IEV) -
Chapter 221: Magnetic materials and components - -
IEC 60404-1 -
Magnetic materials -
Part 1: Classification EN 60404-1 -
IEC 60404-9 -
Magnetic materials -
Part 9: Methods of determination of the geometrical characteristics of electrical steel sheet and strip EN 60404-9 -
IEC 60404-16 -
Magnetic materials -
Part 16: Methods of measurement of the magnetic properties of Fe-based amorphous strip by means of a single sheet tester EN IEC 60404-16 -
ISO 404 -
Steel and steel products - General technical delivery requirements - -
ISO 10474 -
Steel and steel products - Inspection documents - -
IEC 60404-8-11 Edition 1.0 2018-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Magnetic materials –
Part 8-11: Specifications for individual materials – Fe-based amorphous strip delivered in the semi-processed state
Matériaux magnétiques –
Partie 8-11: Spécifications pour matériaux particuliers – Bandes en alliage amorphe à base de fer livrées à l'état semi-fini
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 17.220.20; 29.030
ISBN 978-2-8322-5437-0
– 2 – IEC 60404-8-11:2018 © IEC 2018 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms and definitions . 7 4 Classification . 8 5 Designation . 8 6 General requirements . 8 6.1 Production process . 8 6.2 Form of supply . 9 6.3 Delivery condition . 9 6.4 Surface condition . 9 6.5 Suitability for cutting . 9 7 Technical requirements . 10 7.1 Magnetic properties . 10 7.1.1 Reference condition . 10 7.1.2 Magnetic polarization . 10 7.1.3 Specific total loss . 10 7.2 Geometrical characteristics and tolerances . 12 7.2.1 Thickness . 12 7.2.2 Width . 13 7.2.3 Length . 13 7.2.4 Edge camber . 13 7.2.5 Edge wave (wave factor) . 13 7.2.6 Residual curvature . 13 7.2.7 Burr height . 13 7.3 Technological characteristics . 13 7.3.1 Density . 13 7.3.2 Stacking factor. 14 7.3.3 Strip tear ductility . 14 7.3.4 Internal stresses . 14 7.3.5 Surface insulation resistance . 14 8 Inspection and testing . 14 8.1 General . 14 8.2 Selection of test samples . 15 8.3 Preparation of test specimens . 15 8.3.1 Magnetic properties . 15 8.3.2 Geometrical characteristics and tolerances . 15 8.3.3 Technological characteristics . 16 8.4 Test methods . 16 8.4.1 General . 16 8.4.2 Magnetic properties . 16 8.4.3 Geometrical characteristics and tolerances . 16 8.4.4 Technological characteristics . 17 8.5 Retests . 17 9 Marking, labelling and packaging . 17 SIST EN IEC 60404-8-11:2018
IEC 60404-8-11:2018 © IEC 2018 – 3 –
10 Complaints . 17 11 Information to be supplied by the purchaser . 18 12 Information to be supplied by the manufacturer . 18 Annex A (informative)
Non-specified magnetic properties . 19 Annex B (normative)
Test method of determination of the stacking factor for Fe-based amorphous strips . 20 B.1 General . 20 B.2 Test specimen . 20 B.3 Measurement procedure . 20 B.4 Reproducibility . 22
Figure B.1 – Schematic diagram of a stacking specimen and a linear
measuring device on side view (a) and on top view (b) . 21
Table 1 – Technological properties and magnetic properties of the conventional grades of Fe-based amorphous strip . 11 Table 2 – Technological properties and magnetic properties of the high permeability grades of Fe-based amorphous strip . 12 Table 3 – Tolerances on the nominal width
of Fe-based amorphous strip . 13 Table 4 – Ductility code and number of brittle spots
of Fe-based amorphous strip. 14 Table A.1 – Non-specified magnetic properties of Fe-based amorphous strip . 19
– 4 – IEC 60404-8-11:2018 © IEC 2018 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
MAGNETIC MATERIALS –
Part 8-11: Specifications for individual materials –
Fe-based amorphous strip delivered in the semi-processed state
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
...