|
SLOVENSKI STANDARD
01-oktober-2018
2NROMVNRSUHVNXãDQMHGHO 3UHVNXVL3UHVNXV7G SUHVNXVQDPHWRGD]D
VSDMNDQMHRGSRUQRVWSRYUãLQVNRPRQWLUDQLKNRPSRQHQW 60' SURWLUD]NUDMDQMX
SRNRYLQMHQMDLQYURþLQLVSDMNH'RSROQLOR$
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability,
resistance to dissolution of metallization and to soldering heat of surface mounting
devices (SMD)
Umweltprüfungen - Teil 2-58: Prüfungen - Prüfung Td: Prüfverfahren für Lötbarkeit,
Widerstandsfähigkeit gegenüber Auflösen der Metallisierung und Lötwärmebeständigkeit
bei oberflächenmontierbaren Bauelementen (SMD)
Essais d'environnement - Partie 2-58: Essais - Essai Td: Méthodes d'essai de la
soudabilité, résistance de la métallisation à la dissolution et résistance à la chaleur de
brasage des composants pour montage en surface (CMS)
Ta slovenski standard je istoveten z: EN 60068-2-58:2015/A1:2018
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
31.190 Sestavljeni elektronski Electronic component
elementi assemblies
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60068-2-58:2015/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2018
ICS 19.040; 31.190
English Version
Environmental testing - Part 2-58: Tests - Test Td: Test methods
for solderability, resistance to dissolution of metallization and to
soldering heat of surface mounting devices (SMD)
(IEC 60068-2-58:2015/A1:2017)
Essais d'environnement - Partie 2-58: Essais - Essai Td: Umweltprüfungen - Teil 2-58: Prüfungen - Prüfung Td:
Méthodes d'essai de la soudabilité, résistance de la Prüfverfahren für Lötbarkeit, Widerstandsfähigkeit
métallisation à la dissolution et résistance à la chaleur de gegenüber Auflösen der Metallisierung und
brasage des composants pour montage en surface (CMS) Lötwärmebeständigkeit bei oberflächenmontierbaren
(IEC 60068-2-58:2015/A1:2017) Bauelementen (SMD)
(IEC 60068-2-58:2015/A1:2017)
This amendment A1 modifies the European Standard EN 60068-2-58:2015; it was approved by CENELEC on 2017-09-01. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60068-2-58:2015/A1:2018 E
European foreword
The text of document 91/1445/FDIS, future edition 1 of IEC 60068-2-58:2015/A1, prepared by
IEC/TC 91 "Electronics assembly technology" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60068-2-58:2015/A1:2018.
The following dates are fixed:
(dop) 2018-10-13
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-04-13
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60068-2-58:2015/A1:2017 was approved by CENELEC as
a European Standard without any modification.
IEC 60068-2-58
Edition 4.0 2017-07
INTERNATIONAL
STANDARD
colour
inside
AMENDMENT 1
Environmental testing –
Part 2-58: Tests – Test Td: Test methods for solderability, resistance to
dissolution of metallization and to soldering heat of surface mounting devices
(SMD)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 19.040; 31.190 ISBN 978-2-8322-4575-0
– 2 – IEC 60068-2-58:2015/AMD1:2017
© IEC 2017
FOREWORD
This amendment has been prepared by IEC technical committee 91: Electronics assembly
technology.
The text of this amendment is based on the following documents:
FDIS Report on voting
91/1445/FDIS 91/1451/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this publication may be issued at a later date.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
_____________
1 Scope
Replace the existing second paragraph of the Scope with the following new paragraph:
Thi
...