|
SLOVENSKI STANDARD
01-julij-2021
Nadomešča:
SIST EN 61851-21:2002
Sistemi za napajanje električnih vozil - 21-2. del: Zahteve za električna vozila za
priključitev na izmenično/enosmerno napajanje - EMC zahteve za zunanje
napajalne sisteme električnih vozil
Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for
conductive connection to an AC/DC supply - EMC requirements for off board electric
vehicle charging systems
Ta slovenski standard je istoveten z: EN IEC 61851-21-2:2021
ICS:
43.120 Električna cestna vozila Electric road vehicles
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61851-21-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 33.100.10; 43.120 Supersedes EN 61851-21:2002 (partially)
English Version
Electric vehicle conductive charging system - Part 21-2: Electric
vehicle requirements for conductive connection to an AC/DC
supply - EMC requirements for off board electric vehicle charging
systems
(IEC 61851-21-2:2018)
Système de charge par conduction pour véhicules Konduktive Ladesysteme für Elektrofahrzeuge - Teil 21-2:
électriques - Partie 21-2: Exigences applicables aux Anforderungen für den konduktiven Anschluss von
véhicules électriques pour connexion par conduction à une Elektrofahrzeugen an eine Wechsel-
alimentation en courant alternatif ou courant continu - /Gleichstromversorgung - EMV-Anforderungen an externe
Exigences CEM concernant les systèmes de charge non Ladesysteme für Elektrofahrzeuge
embarqués pour véhicules électriques (IEC 61851-21-2:2018)
(IEC 61851-21-2:2018)
This European Standard was approved by CENELEC on 2018-05-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61851-21-2:2021 E
European foreword
The text of document 69/531/FDIS, future edition 1 of IEC 61851-21-2, prepared by IEC/TC 69
"Electrical power/energy transfer systems for electrically propelled road vehicles and industrial trucks"
was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-10-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-04-30
document have to be withdrawn
This document (partially) supersedes EN 61851-21:2002 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61851-21-2:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61851-21-1 NOTE Harmonized as EN 61851-21-1
IEC 61980 (series) NOTE Harmonized as EN IEC 61980 (series)
CISPR 11:2015 NOTE Harmonized as EN 55011:2016
CISPR 16-2-1:2014 NOTE Harmonized as EN 55016-2-1:2014 (not modified)
ISO 15118-3:2015 NOTE Harmonized as EN ISO 15118-3:2016 (not modified)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60038 (mod) 2009 IEC standard voltages EN 60038 2011
IEC 61000-3-2 2014 Electromagnetic compatibility (EMC) - Part EN 61000-3-2 2014
3-2: Limits - Limits for harmonic current
emissions (equipment input current ≤ 16 A
per phase)
IEC 61000-3-3 2013 Electromagnetic compatibility (EMC) - Part EN 61000-3-3 2013
3-3: Limits - Limitation of voltage changes,
voltage fluctuations and flicker in public
low-voltage supply systems, for equipment
with rated current ≤16 A per phase and not
subject to conditional connection
IEC 61000-3-11 2017 Electromagnetic compatibility (EMC) - Part EN IEC 61000-3-2019
3-11 - Limits - Limitation of voltage 11
changes, voltage fluctuations and flicker in
public low-voltage supply systems -
Equipment with rated current ≤ 75 A and
subject to conditional connection
IEC 61000-3-12 2011 Electromagnetic compatibility (EMC) - Part EN 61000-3-12 2011
3-12: Limits - Limits for harmonic currents
produced by equipment connected to
public low-voltage systems with input
current >16 A and ≤ 75 A per phase
IEC 61000-4-2 2008 Electromagnetic compatibility (EMC) - Part EN 61000-4-2 2009
4-2: Testing and measurement techniques
- Electrostatic discharge immunity test
IEC 61000-4-3 2006 Electromagnetic compatibility (EMC) - Part EN 61000-4-3 2006
4-3 : Testing and measurement techniques
- Radiated, radio-frequency,
electromagnetic field immunity test
+ A1 2007 + A1 2008
+ A2 2010 + A2 2010
Publication Year Title EN/HD Year
IEC 61000-4-4 2012 Electromagnetic compatibility (EMC) - Part EN 61000-4-4 2012
4-4: Testing and measurement techniques
- Electrical fast transient/burst immunity
test
IEC 61000-4-5 2014 Electromagnetic compatibility (EMC) - Part EN 61000-4-5 2014
4-5: Testing and measurement techniques
- Surge immunity test
+ A1 2017 + A1 2017
IEC 61000-4-6 2013 Electromagnetic compatibility (EMC) - Part EN 61000-4-6 2014
4-6: Testing and measurement techniques
- Immunity to conducted disturbances,
induced by radio-frequency fields
IEC 61000-4-8 2009 Electromagnetic compatibility (EMC) - Part EN 61000-4-8 2010
4-8: Testing and measurement techniques
- Power frequency magnetic field immunity
test
IEC 61000-4-11 2004 Electromagnetic compatibility (EMC) - Part EN 61000-4-11 2004
4-11: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests
+ A1 2017 + A1 2017
IEC 61000-4-34 2005 Electromagnetic compatibility (EMC) - Part EN 61000-4-34 2007
4-34: Testing and measurement
techniques - Voltage dips, short
interruptions and voltage variations
immunity tests for equipment with input
current more than 16 A per phase
+ A1 2009 + A1 2009
IEC 61000-6-1 2016 Electromagnetic compatibility (EMC) - Part EN IEC 61000-6-1 2019
6-1: Generic standards - Immunity
standard for residential, commercial and
light-industrial environments
IEC 61000-6-2 2016 Electromagnetic compatibility (EMC) - Part EN IEC 61000-6-2 2019
6-2: Generic standards - Immunity
standard for industrial environments
IEC 61000-6-3 2006 Electromagnetic compatibility (EMC) - Part EN 61000-6-3 2007
6-3: Generic standards - Emission
standard for residential, commercial and
light-industrial environments
+ A1 2010 + A1 2011
- - + AC 2012
IEC 61000-6-4 2006 Electromagnetic compatibility (EMC) -- Part EN 61000-6-4 2007
6-4: Generic standards - Emission
standard for industrial environments
+ A1 2010 + A1 2011
IEC 61851-1 2017 Electric vehicle conductive charging EN IEC 61851-1 2019
system - Part 1: General requirements
Publication Year Title EN/HD Year
IEC 61851-23 2014 Electric vehicle conductive charging EN 61851-23 2014
system - Part 23: DC electric vehicle
charging station
IEC 62053-21 2003 Electricity metering equipment (a.c.) - EN 62053-21 2003
Particular requirements - Part 21: Static
meters for active energy (classes 1 and 2)
CISPR 16-1-2 2014 Specification for radio disturbance and EN 55016-1-2 2014
immunity measuring apparatus and
methods - Part 1-2: Radio disturbance and
immunity measuring apparatus - Coupling
devices for conducted disturbance
measurements
CISPR 16-1-4 2010 Specification for radio disturbance and EN 55016-1-4 2010
immunity measuring apparatus and
methods - Part 1-4: Radio disturbance and
immunity measuring apparatus - Antennas
and test sites for radiated disturbance
measurements
+ A1 2012 + A1 2012
+ A2 2017 + A2 2017
CISPR 25 2008 Vehicles, boats and internal combustion - -
engines - Radio disturbance characteristics
- Limits and methods of measurement for
the protection of on-board receivers
CISPR 32 2015 Electromagnetic compatibility of multimedia EN 55032 2015
equipment - Emission requirements
- - + A11 2020
MIL-STD-461F 2007 Department of Defense interface standard
requirements for the control of
electromagnetic interference
characteristics of subsystems and
equipment
IEC 61851-21-2
Edition 1.0 2018-04
INTERNATIONAL
STANDARD
Electric vehicle conductive charging system –
Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC
supply – EMC requirements for off-board electric vehicle charging systems
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.100.10; 43.120 ISBN 978-2-8322-5123-2
– 2 – IEC 61851-21-2:2018 © IEC 2018
CONTENTS
FOREWORD . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 9
4 Test plan . 11
4.1 General . 11
4.2 Configuration of EUT . 11
4.3 Termination of the EUT during testing . 12
4.4 Operating and test conditions . 12
4.4.1 General . 12
4.4.2 Immunity . 12
4.4.3 Emissions . 12
4.4.4 Environmental conditions/limitations . 13
5 Immunity requirements . 13
5.1 General . 13
5.2 Performance criteria . 22
5.2.1 General . 22
5.2.2 Performance criteria A . 22
5.2.3 Performance criteria B . 22
5.2.4 Performance criteria C . 22
6 Emission requirements . 23
6.1 General . 23
6.2 Limits and test conditions
...