|
SLOVENSKI STANDARD
01-september-2018
1DGRPHãþD
SIST EN 62386-207:2010
Digitalni naslovljivi vmesnik za razsvetljavo - 207. del: Posebne zahteve za krmilja -
Moduli LED (naprava tipa 6) (IEC 62386-207:2018)
Digital addressable lighting interface - Part 207: Particular requirements for control gear -
LED modules (device type 6) (IEC 62386-207:2018)
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 207: Besondere
Anforderungen an Betriebsgeräte - LED-Module (Gerätetyp 6) (IEC 62386-207:2018)
Interface d'éclairage adressable numérique - Partie 207: Exigences particulières pour les
appareillages de commande - Modules de DEL (dispositifs de type 6) (IEC 62386-
207:2018)
Ta slovenski standard je istoveten z: EN IEC 62386-207:2018
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62386-207
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2018
ICS 29.140.50; 29.140.99 Supersedes EN 62386-207:2009
English Version
Digital addressable lighting interface - Part 207: Particular
requirements for control gear - LED modules (device type 6)
(IEC 62386-207:2018)
Interface d'éclairage adressable numérique - Partie 207: Digital adressierbare Schnittstelle für die Beleuchtung - Teil
Exigences particulières pour les appareillages de 207: Besondere Anforderungen an Betriebsgeräte - LED-
commande - Modules de LED (dispositifs de type 6) Module (Gerätetyp 6)
(IEC 62386-207:2018) (IEC 62386-207:2018)
This European Standard was approved by CENELEC on 2018-05-17. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62386-207:2018 E
European foreword
The text of document 34/483/FDIS, future edition 2 of IEC 62386-207, prepared by IEC/TC 34 "Lamps
and related equipment" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 62386-207:2018.
The following dates are fixed:
(dop) 2019-02-17
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2021-05-17
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62386-207:2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62386-207:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61347 (series) NOTE Harmonized as EN 61347 (series).
IEC 61347-1 NOTE Harmonized as EN 61347-1.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 62386-101 2014 Digital addressable lighting interface - Part EN 62386-101 2014
101: General requirements - System
components
1 2
+ A1 - + A1 -
IEC 62386-102 2014 Digital addressable lighting interface - Part EN 62386-102 2014
102: General requirements - Control gear
3 4
+ A1 - + A1 -
5 6
IEC 62386-216 - Digital addressable lighting interface – Part EN 62386-216 -
216: Particular requirements for control
gear – Load referencing (device type 15)
IEC 62386-217 2018 Digital addressable lighting interface – Part EN IEC 62386-217 2018
217: Particular requirements for control
gear – Thermal gear protection (device
type 16)
IEC 62386-218 2018 Digital addressable lighting interface – Part EN IEC 62386-218 2018
218: Particular requirements for control
gear – Dimming curve selection (device
type 17)
IEC 62386-222 2018 Digital addressable lighting interface – Part EN IEC 62386-222 2018
222: Particular requirements for control
gear – Thermal lamp protection (device
type 21)
IEC 62386-224 2018 Digital addressable lighting interface – Part EN IEC 62386-224 2018
224: Particular requirements for control
gear – Non-replaceable light source
(device type 23)
Under preparation. Stage at the time of publication: IEC TPUB 62386-101/AMD1:2018.
Under preparation. Stage at the time of publication: EN 62386-101:2014/prA1:2017.
Under preparation. Stage at the time of publication: IEC TFDIS 62386-102/AMD1:2018.
Under preparation. Stage at the time of publication: EN 62386-102:2014/prA1:2017.
Under preparation. Stage at the time of publication: IEC BPUB 62386-216:2018.
Under preparation. Stage at the time of publication: FprEN 62386-216:2018.
IEC 62386-207
Edition 2.0 2018-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –
Part 207: Particular requirements for control gear – LED modules (device type 6)
Interface d’éclairage adressable numérique –
Partie 207: Exigences particulières pour les appareillages de commande –
Modules de LED (dispositifs de type 6)
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.140.50; 29.140.99 ISBN 978-2-8322-5500-1
– 2 – IEC 62386-207:2018 © IEC 2018
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 General . 9
4.1 General . 9
4.2 Version number . 9
5 Electrical specification . 9
6 Interface power supply . 9
7 Transmission protocol structure . 9
8 Timing . 9
9 Method of operation . 9
9.1 General . 9
9.2 Fast fade time . 9
9.3 Dimming curve . 10
9.3.1 General . 10
9.3.2 Dimming curve when IEC 62386-218 is implemented . 11
9.3.3 Dimming curve when IEC 62386-218 is not implemented . 11
9.4 Load deviation . 11
9.5 Thermal protection . 12
9.5.1 General . 12
9.5.2 Thermal gear protection . 12
9.5.3 Thermal lamp protection . 12
9.5.4 Behaviour of thermal protection . 12
9.6 Features information . 13
9.7 Failure status information . 13
9.8 LED module integrated . 13
10 Declaration of variables . 14
11 Definition of commands . 15
11.1 General . 15
11.2 Overview sheets . 15
11.3 Application extended commands . 17
11.3.1 General . 17
11.3.2 Configuration instructions . 17
11.3.3 Queries . 18
11.4 Special commands . 19
11.4.1 General . 19
11.4.2 ENABLE DEVICE TYPE (data) . 19
Bibliography . 20
Figure 1 – IEC 62386 graphical overview . 6
Table 1 – Fast fade times . 10
IEC 62386-207:2018 © IEC 2018 – 3 –
Table 2 – Control gear features . 13
Table 3 – Control gear failure status . 13
Table 4 – Control gear type . 14
Table 5 – Declaration of variables . 14
Table 6 – Application extended commands for this device type . 15
– 4 – IEC 62386-207:2018 © IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
DIGITAL ADDRESSABLE LIGHTING INTERFACE –
Part 207: Particular requirements for control gear –
LED modul
...