EN 60570:2003/A1:2018

Electrical supply track systems for luminaires

EN 60570:2003/A1:2018

Name:EN 60570:2003/A1:2018   Standard name:Electrical supply track systems for luminaires
Standard number:EN 60570:2003/A1:2018   language:English language
Release Date:17-May-2018   technical committee:CLC/TC 34 - 'Lamps and related equipment
Drafting committee:IEC/SC 34D - IEC_SC_34D   ICS number:29.120.20 - Connecting devices

SLOVENSKI STANDARD
01-julij-2018
(OHNWULþQLWUDþQLQDSDMDOQLVLVWHPL]DVYHWLONH'RSROQLOR$ ,(&
$
Electrical supply track systems for luminaires (IEC 60570:2003/A1:2017)
Elektrische Stromschienensysteme für Leuchten (IEC 60570:2003/A1:2017)
Systèmes d'alimentation électrique par rail pour luminaires (IEC 60570:2003/A1:2017)
Ta slovenski standard je istoveten z: EN 60570:2003/A1:2018
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60570:2003/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2018
ICS 29.120.20; 29.140.40
English Version
Electrical supply track systems for luminaires
(IEC 60570:2003/A1:2017)
Systèmes d'alimentation électrique par rail pour luminaires Elektrische Stromschienensysteme für Leuchten
(IEC 60570:2003/A1:2017) (IEC 60570:2003/A1:2017)
This amendment A1 modifies the European Standard EN 60570:2003; it was approved by CENELEC on 2017-05-10. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60570:2003/A1:2018 E

European foreword
The text of document 34D/1221/CDV, future edition 1 of IEC 60570:2003/A1:2017, prepared by
IEC/SC 34D "Luminaires" of IEC/TC 34 "Lamps and related equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 60570:2003/A1:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2018-11-18
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-05-18
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive see informative Annex ZZ, which is an integral part of this
document.
Endorsement notice
The text of the International Standard IEC 60570:2003/A1:2017 was approved by CENELEC as a
European Standard without any modification.
Annex ZZ
(informative)
Relationship between this European standard and the safety objectives of
Directive 2014/35/EU [2014 OJ L96] aimed to be covered

This European Standard has been prepared under a Commission’s standardization request relating to
harmonized standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means
of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the
Council of 26 February 2014 on the harmonization of the laws of the Member States relating to the
making available on the market of electrical equipment designed for use within certain voltage limits
[2014 OJ L96].
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding safety objectives of
that Directive, and associated EFTA regulations.
Table ZZ.1 – Correspondence between this European standard and Annex I of Directive
2014/35/EU [2014 OJ L96]
Clause(s) / sub-clause(s)
Safety objectives of Directive
Remarks / Notes
2014/35/E
...

  • Relates Information
  • ISO 8130-9:1992

    ISO 8130-9:1992 - Coating powders
    09-28
  • EN 352-2:2020/FprA1

    EN 352-2:2021/oprA1:2023
    09-28
  • IEC TS 61158-4:1999

    IEC TS 61158-4:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data Link protocol specification Released:3/24/1999 Isbn:2831847656
    09-28
  • HD 566 S1:1990

    HD 566 S1:1998
    09-28
  • ISO 5131:1982/Amd 1:1992

    ISO 5131:1982/Amd 1:1992
    09-28
  • EN 60598-2-22:1990

    EN 60598-2-22:1996
    09-27
  • ISO 8504-2:1992

    ISO 8504-2:1992 - Preparation of steel substrates before application of paints and related products -- Surface preparation methods
    09-27
  • EN 12165:2024

    prEN 12165:2022
    09-27
  • IEC TS 61158-6:1999

    IEC TS 61158-6:1999 - Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 6: Application Layer protocol specification Released:3/24/1999 Isbn:2831847613
    09-27
  • ISO 4252:1992

    ISO 4252:1992 - Agricultural tractors -- Operator's workplace, access and exit -- Dimensions
    09-27